Jump to content

Geo-Portal GeoCoin By DJ.J.ROCK


DJ.J.ROCK

Recommended Posts

1cf2b19d-915f-421b-89b0-9cc75cf0120d.jpg

Here is my first design- I hope you all will enjoy my designs, Im bringing a unique style for more modern style coin designs.

 

This one is called Geo-Portal

some of the specs in the art have been changed to make the best quailty/show coin possible and still working towards a finished product.

 

I wanted to get this thread started to get some reactions to my design, and I will give more infos tonight after work and answer questions some may have.. hope you like it.

 

DJ.J.ROCK

quick edit to say ,,yes it will be trackable.. so dis-regard that on this first draft of art.

Edited by Flying Spaghetti Monster
Link to comment

1cf2b19d-915f-421b-89b0-9cc75cf0120d.jpg

Here is my first design- I hope you all will enjoy my designs, Im bringing a unique style for more modern style coin designs.

 

This one is called Geo-Portal

some of the specs in the art have been changed to make the best quailty/show coin possible and still working towards a finished product.

 

I wanted to get this thread started to get some reactions to my design, and I will give more infos tonight after work and answer questions some may have.. hope you like it.

 

DJ.J.ROCK

quick edit to say ,,yes it will be trackable.. so dis-regard that on this first draft of art.

Not sure where you are int he design process. But if the blocks around the G on the front had different texture for each ring or alternating texture that might look good.

 

Like the coin!

Link to comment

This design certainly has potential to be lovely DJ.J.Rock!

Die cast will give you the best results and some of your detail will need to be proportioned size-wise to be appreciated. It looks like it could/should be a few levels, textures and angles. Platings? I can see a few creative possibilities here for platings! You'll get a better idea of the proportions once it's rendered in Illustrator (or similar) with the appropriate line thicknesses and you can shrink it to live size. We look forward to seeing how this turns out! Well done!! Also, expect that the mint art will need many reviews/revisions before you approve any samples to avoid costly mistakes.

I know you didn't ask :) , so I hope you don't mind me spewing production stuff :) . Helen

Link to comment

Holmbiorn will *love* this one (Stargate is one of his favorites!)

 

Put us down for a couple... :)

Yes!!!! The Stargate!! one of our favorate series, weve spent of many night togeather watching it,, I started to think how cool it would be to portal to a cache in another world, thats where this coin comes from, also caching was a big part of being so close to my lil one, and you have to take a step to make that difference, so this coin is very meaningful to me and our family!!

 

each symbol has a meaning and all symbols have been or are well knowen.

 

Im not sure if the coin will have a presale or take reservations. but I will refer to this thread and send out a e-mail to each and everyone who wants one when the sales or reserves go up, as a nice gesture for supporting me and my ideas.

Link to comment

Not sure where you are int he design process. But if the blocks around the G on the front had different texture for each ring or alternating texture that might look good.

 

Like the coin!

right now we are looking at a sandblast for the brick to give them that real look of a brick and the texture too!

Link to comment

This design certainly has potential to be lovely DJ.J.Rock!

Die cast will give you the best results and some of your detail will need to be proportioned size-wise to be appreciated. It looks like it could/should be a few levels, textures and angles. Platings? I can see a few creative possibilities here for platings! You'll get a better idea of the proportions once it's rendered in Illustrator (or similar) with the appropriate line thicknesses and you can shrink it to live size. We look forward to seeing how this turns out! Well done!! Also, expect that the mint art will need many reviews/revisions before you approve any samples to avoid costly mistakes.

I know you didn't ask :unsure: , so I hope you don't mind me spewing production stuff :blink: . Helen

 

we are looking at all options to create the best coin possible, nothing is ruled out,, we are looking at multi plating as well,, I thank you for your advice,, and your support.

 

due to design issues with the mint the multi angle edge had to be flush with the rest of the coin to get the detail we wanted from the icons, I felt like it was a small trade as the icons are a very important part of this design and needed to be clear instead of shrunk because of the multi angle edge,,..

Link to comment

I also wanted to thank you all for your kind words and support on this coin,, because it is my first,, and I

have learned a ton from the beginning of this project, bare with me as I continue to learn- in hopes of bringing you many more designs.

 

I will be posting quite a bit in this thread, to keep you all on your toes and will post a die art in the next few days. so please check back for updates often.

 

thank you all VERY MUCH!!! DJ.J.ROCK

Link to comment

Out of this world! I'd like one, especially if it's my key to caching in new worlds. :unsure::D

I'm not sure what it's called, but there is a dark nickel (not black nickel) that looks sort of smokey brownish and it's very shiny... it think it would be the perfect choice for this coin! :blink:

Mark me down for one (or two). :)

Edited by tom4props
Link to comment

154f663d-c055-47c9-b684-fccaa3f476ee.jpg

Seeing lots of artwork in my time and you being a fellow Colorado cacher I hope yo don't mind me asking and making a few comments.

 

1. The artwork from the mint dose not indicate there af differnt level other than raised and recessed. For the areas in purple that I think you want recessed and filled need to be incidated as such. For example the levest level would indicate 3 the next level 2 and the top level 1. It might by somewhar I just don;t see it here.

 

2. Do you want the letting to be placed the way they are or should the base of the letter always be toward the inside of the coin and not up and down. Tough to explain without a picture, send me an email if you want me to explain this one furture.

 

3. Tracking info and nubmer. Assuming DaFrongs is correct on the tracking info, where is the number going? If it is on the edge there will not be much room with the recessed notches from each side. If it doesn't fit there try one of the swirls in the protal.

 

4. Speaking of swirls and portal. The you make then and/or the family 1/2 recessed or level 2 they might look like they are comming through the portal a bit more.

 

Ok...I'll stop. Sorry if this was to much.

 

Mike

Link to comment

YOUR OK MIKE, I CAN TAKE CONSTRUCTIVENESS WELL,, I UNDERSTAND EVERYTHING YOU ARE SAYING,, THE LETTERS ARE SUSPOSTO BE LIKE THAT AS I WANTED TO GET A DIFFERENT FEEL RATHER THEN THE USUAL RAINBOW LOOK. THIS WAY YOU HAVE KINDA A SLIDING OR STACKED LOOK AND IT WAS A BIT DIFFERENT FROM MOST IVE SEEN

 

IT WILL BE TRACKABLE SO YES THE TRACKING IS MISSING....

 

THE PEPOLE ARE TO LOOK LIKE THEY ARE GOING IN, SO IT WOULD BE THE OTHER WAY AROUND, THAT IS ALSO THE REASON WHY THEY LOOK SMALL :blink:

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...