+Delta68 Posted July 2, 2012 Share Posted July 2, 2012 Does anyone refer to cache Attributes while out caching? Mark Quote Link to comment
+Pharisee Posted July 2, 2012 Share Posted July 2, 2012 Does anyone refer to cache Attributes while out caching? Mark I can't answer for everyone but I don't. Quote Link to comment
+Y6GST Posted July 2, 2012 Share Posted July 2, 2012 It is nice to know if a tree needs climbing, but I would notice this at home when planning the days caching, rather than out in the field, other than that I don't really take any notice of them, other than noticing the amount of no snowmobiles allowed that seem to be cropping up... Quote Link to comment
+rickardclan Posted July 2, 2012 Share Posted July 2, 2012 Most certainly do! In a few cases the attributes got me to particularly tricky finds. Use them in a combination with previous logs, hint & description nowadays just in case Quote Link to comment
+metal-bijou Posted July 2, 2012 Share Posted July 2, 2012 I used to to search for scuba caches but otherwise never. Quote Link to comment
+MikeyG. Posted July 2, 2012 Share Posted July 2, 2012 Yes, I use them. Helps with the search and helps determine if it is kid friendly. Quote Link to comment
+nevryan Posted July 2, 2012 Share Posted July 2, 2012 I just dump a PQ to GPS, iPhone and car satnav once a month. After that I just head to a nice looking area for a walk that has some caches and hunt for any I pass. Quote Link to comment
+Delta68 Posted July 2, 2012 Author Share Posted July 2, 2012 I used to to search for scuba caches... Really? When you were already out caching? Most certainly do! How? Are you using paper cache listings? They don't show up on our Oregon Mark Quote Link to comment
+metal-bijou Posted July 2, 2012 Share Posted July 2, 2012 I used to to search for scuba caches... Really? When you were already out caching? Indeed. PQ of area I was off diving with the club or when diving away on holiday. Never came to anything though but I lived in hope... Quote Link to comment
+eusty Posted July 2, 2012 Share Posted July 2, 2012 Depends.... If I view a cache before going out to find it then I'll look at the attributes. But mostly I just go out and use the GPSr (Oregon/Colorado)....which has been mentioned don't support attributes (gpx 1.0.1?) Quote Link to comment
+Delta68 Posted July 2, 2012 Author Share Posted July 2, 2012 (edited) Depends.... If I view a cache before going out to find it then I'll look at the attributes. But mostly I just go out and use the GPSr (Oregon/Colorado)....which has been mentioned don't support attributes (gpx 1.0.1?) It's not a 'depends' then is it? It's a 'no'! I wasn't asking if anyone uses Attributes I was asking if anyone uses them while out caching eg reach GZ and then have a look at the attributes Thanks Mark Edited July 2, 2012 by Delta68 Quote Link to comment
Alan White Posted July 2, 2012 Share Posted July 2, 2012 I don't often look at attributes, especially in the field, but just a few times they've proved invaluable: - occasionally there's an attribute which turns a near-DNF into a find - when caching ad-hoc, an attribute can help determine whether to visit a particular cache. As for seeing them on an Oregon, you need this GSAK macro. Caveat: I don't use this macro myself though I do use a modified version of its attribute display in my own macro. Quote Link to comment
+metal-bijou Posted July 2, 2012 Share Posted July 2, 2012 I've had a couple of people wished they'd used the attributes at GZ to one of my caches. Only so that they didn't waste time without the specialest eqpt. Quote Link to comment
+lodgebarn Posted July 2, 2012 Share Posted July 2, 2012 How? Are you using paper cache listings? They don't show up on our Oregon Mark I use the GSAK Oregon output macro with "Always include my logs" set. I think there is an option sowmehere to include the cache attributes in this log and then you can see them on the Oregon. Sorry I can't for the life of me find the exact reference but if I do I will add to the thread. I certainly do use them on occasions. Quote Link to comment
+simplysup Posted July 2, 2012 Share Posted July 2, 2012 Does anyone refer to cache Attributes while out caching? Yes, quite often. I use the GarminExport macro for GSAK to export caches to my Oregon. This creates a dummy log as the first log for each cache, which lists the attributes. Here's the GSAK forum post which introduced the functionality (in 2010) - see item 7 for a screenshot. Quote Link to comment
+*mouse* Posted July 2, 2012 Share Posted July 2, 2012 There are times when they act as a bit of a clue so I have on the odd occasion. Quote Link to comment
+mellers Posted July 2, 2012 Share Posted July 2, 2012 Absolutely - but not "in the field", more when planning which caches to do. If it has a thorns attribute, I'll make dadgum sure I have longs sleeves and gloves. If it has a special tool required, then I'll try to make sure I find out what it is and take one. I also look at the NM attribute when writing up my logs. If it's got a soggy log but already got an NM attribute, I probably won't add another. Quote Link to comment
+ivanidea Posted July 3, 2012 Share Posted July 3, 2012 Since I just transfer the Groundspeak gpx file to my Oregan, I just have the info that provides. I don't even bother using their waypoint gpx since I can't just delete their waypoints without deleting mine. Quote Link to comment
+Lord_Blackadder Posted July 3, 2012 Share Posted July 3, 2012 Does anyone refer to cache Attributes while out caching? Mark Yes I do regularly. Quote Link to comment
+Thathanka Posted July 3, 2012 Share Posted July 3, 2012 I do and imvho attributes should be mandatory as coordinates, cache size and dif/ter rating. Quote Link to comment
+perth pathfinders Posted July 3, 2012 Share Posted July 3, 2012 How about ..... Does anyone refer to cache Attributes. FULL STOP!! Mark I have a puzzle - a Field Puzzle - with the Field Puzzle attribute on the page. I still get emails saying they don't understand why there isn't a puzzle on the page. You would think when it is a puzzle they look at everything? Quote Link to comment
+buffhusky Posted July 4, 2012 Share Posted July 4, 2012 I do - I often cache with young children and a dog, so if ticks & thorns (or "no dogs") are listed, I'll probably wait until I can go without them. Also the wheelchair accessible one is useful if I'm with a child in a pram. Quote Link to comment
+redsox_mark Posted July 5, 2012 Share Posted July 5, 2012 I never have looked at them in the field - unless I have printed out the cache page (which I tend to do for multi caches or some puzzles). My GPSr is a Etrex Legend HCx which supports very limited paperless (e.g. I download the first 30 characters of the hint). I also have an iPhone and I will refer to this in the field if I get stuck; to get the full hint or read the description. I generally do this via a pocket query rather than "live" (it works faster, and works in places without any phone signal). I just noticed that in my pocket queries on the iPhone the Attributes are greyed out. When I look at caches "live" on the iPhone I can see attributes. I'm not sure if there is some way to have the pocket query include attributes that I'm missing? When planning from home I do sometimes look at the attributes - but not always. Quote Link to comment
+Loony Londo Posted July 5, 2012 Share Posted July 5, 2012 I look at attributes when I am in the field C:geo down load them when you refresh the cache as attributes do not seem to be in the gpx pocket queries . Quote Link to comment
Alan White Posted July 5, 2012 Share Posted July 5, 2012 attributes do not seem to be in the gpx pocket queries . They are if you choose GPX 1.0.1 (bottom of your account page). Note that this must be done twice (or did when I last used it) as the first time doesn't stick. Quote Link to comment
+redsox_mark Posted July 5, 2012 Share Posted July 5, 2012 attributes do not seem to be in the gpx pocket queries . They are if you choose GPX 1.0.1 (bottom of your account page). Note that this must be done twice (or did when I last used it) as the first time doesn't stick. I have GPX Version: GPX 1.0.1 but I don't see the attributes on my iPhone using a pocket query. Quote Link to comment
Alan White Posted July 5, 2012 Share Posted July 5, 2012 I have GPX Version: GPX 1.0.1 but I don't see the attributes on my iPhone using a pocket query. Perhaps not: that's a function of the app you're using. I was simply correcting Loony Londo who thought that attributes aren't in PQs. To confirm that they are, open the PQ in a text editor and you'll see tags such as <Groundspeak:attributes> <Groundspeak:attribute id="56" inc="1">Medium hike (1km-10km)</Groundspeak:attribute> <Groundspeak:attribute id="1" inc="1">Dogs</Groundspeak:attribute> </Groundspeak:attributes> Quote Link to comment
+lifechooser Posted July 5, 2012 Share Posted July 5, 2012 Yes... but only if a difficulty / terrain rating is greater than 4. Quote Link to comment
+Gushoneybun Posted July 5, 2012 Share Posted July 5, 2012 I will check them when out but normally only when I am struggling to find the cache. Just hoping to glean an extra hint or when I need confirmation that I will need to get my feet wet or climb the tree etc. Quote Link to comment
+redsox_mark Posted July 5, 2012 Share Posted July 5, 2012 I have GPX Version: GPX 1.0.1 but I don't see the attributes on my iPhone using a pocket query. Perhaps not: that's a function of the app you're using. I was simply correcting Loony Londo who thought that attributes aren't in PQs. To confirm that they are, open the PQ in a text editor and you'll see tags such as <Groundspeak:attributes> <Groundspeak:attribute id="56" inc="1">Medium hike (1km-10km)</Groundspeak:attribute> <Groundspeak:attribute id="1" inc="1">Dogs</Groundspeak:attribute> </Groundspeak:attributes> Thanks - you are right; they are in the PQ (I can see them in GSAK), but they don't show in the iPhone app. Quote Link to comment
+zarbi&zarbibird Posted July 7, 2012 Share Posted July 7, 2012 Never looked at em....at home or out caching! Quote Link to comment
+Stuey Posted July 8, 2012 Share Posted July 8, 2012 Does anyone refer to cache Attributes while out caching? Yes, sometimes. On my Oregon which has the first "log" set to display all of the attributes. It's made possible by a GSAK macro called ColoradoExport.gsk which also adds a diddy little icon for corrected, parking available and micro indicators. Quote Link to comment
+varlet Posted September 4, 2012 Share Posted September 4, 2012 I often use attributes. Sometimes to see if its near the ground (wheelchair accessible) or more up in the air (available in winter). As my eTrex doesn't display them, i made a webpage to attach a log with those attributes to the gpx-file (like with the GSAK script). You can find it here: http://webkum.de/geocaching/index.html Quote Link to comment
+StillRabbit Posted September 4, 2012 Share Posted September 4, 2012 As I'm only a newbie to this game I did refer to the attributes last weekend (they came up on my iPhone) as it helped to be able to tell my son what to look for. I also knew from looking at the details before leaving that one of them would definitely my husband to retrieve it because of it's position (I'm on the short side). Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.