+Meow&Purr Posted May 9, 2016 Share Posted May 9, 2016 My wife, Michelle, AKA Mrs. geocat, passed away August 7, 2014. Earlier this year I turned her car into a cache! I used her craft paints to paint the logos and trackable codes from ones I have in my inventory. I took a remote controlled skeleton/zombie we used to love to chase the kids down the driveway at Halloween and put her behind the wheel. I think she would love it! Mrs. geocat's Trackamobile We've visited this cache. Incredible! One bin is devotes to trackables. What a fantastic memorial, one of our favorites, for sure. Quote Link to comment
+cliptwings Posted May 10, 2016 Share Posted May 10, 2016 I just loved the movie and book "The Martian." I developed this two stage cache to mimic the scene where the astronaut uses an old Mars probe to communicate with NASA. The geocaching number is GC6G639. Here's how it works: There's an arduino microcontroller in the cookie tin. It controls lights, buzzer, and the servo that moves the "camera." When you raise the antenna, the probe wakes up and points to the characters on the edge of the tin. Then the finder uses an ascii table (there's one in the description and one on the probe) to convert the hexidecimal characters into the coordinates for the second stage, or "rescue" vehicle. So far it's working pretty good. https://im1.shutterfly.com/media/47a6db28b3127cceec460f43fb8f00000030O1wAcNGrhs5Zt2bUHt58E/cC/f%3D0/ls%3D00537396854820160510010615968.JPG/ps%3D50/r%3D1/rx%3D550/ry%3D400/ 1 Quote Link to comment
knowschad Posted May 10, 2016 Share Posted May 10, 2016 The ultimate "micro" (microwave) cache: As viewed when approaching from a nearby trail: A closer look: A view from the "back" side: Mostly hand-sawed (which took like forever) with fasteners assembled from inside to be invisible. This started as a 17" diameter log, 26" in length, weighing well over 100 lbs green. Final cache is still estimated around 50 lbs (with working innards of the microwave removed). I hauled it to the forest with help of an appliance hand truck. There's a few seams which are larger than I'd like, but definitely nothing obvious from a distance. Also notice that it's plugged into an electrical outlet in a dead stump. There's more details inside once the door is opened, but that's a surprise that I'm not going to share here. Believe it or not, there is actually a thread here somewhere about a very similar cache that was blown up by a bomb squad. I kid you not. It even had the fake outlet. 1 Quote Link to comment
+GeoBain Posted May 10, 2016 Share Posted May 10, 2016 The ultimate "micro" (microwave) cache: As viewed when approaching from a nearby trail: A closer look: A view from the "back" side: Mostly hand-sawed (which took like forever) with fasteners assembled from inside to be invisible. This started as a 17" diameter log, 26" in length, weighing well over 100 lbs green. Final cache is still estimated around 50 lbs (with working innards of the microwave removed). I hauled it to the forest with help of an appliance hand truck. There's a few seams which are larger than I'd like, but definitely nothing obvious from a distance. Also notice that it's plugged into an electrical outlet in a dead stump. There's more details inside once the door is opened, but that's a surprise that I'm not going to share here. Believe it or not, there is actually a thread here somewhere about a very similar cache that was blown up by a bomb squad. I kid you not. It even had the fake outlet. http://forums.Groundspeak.com/GC/index.php?showtopic=239420&view=findpost&p=4181080 Quote Link to comment
+emmakiwi Posted May 11, 2016 Share Posted May 11, 2016 The ultimate "micro" (microwave) cache: As viewed when approaching from a nearby trail: A closer look: A view from the "back" side: Mostly hand-sawed (which took like forever) with fasteners assembled from inside to be invisible. This started as a 17" diameter log, 26" in length, weighing well over 100 lbs green. Final cache is still estimated around 50 lbs (with working innards of the microwave removed). I hauled it to the forest with help of an appliance hand truck. There's a few seams which are larger than I'd like, but definitely nothing obvious from a distance. Also notice that it's plugged into an electrical outlet in a dead stump. There's more details inside once the door is opened, but that's a surprise that I'm not going to share here. Believe it or not, there is actually a thread here somewhere about a very similar cache that was blown up by a bomb squad. I kid you not. It even had the fake outlet. I believe the cache you're talking about wasn't actually blown up - the report said a jet of water was used to open the microwave and then it was discovered it was the geocache. I am not from the states so I don't know about the location of it - but it does seem to be incredibly similar..! Quote Link to comment
+kunarion Posted May 14, 2016 Share Posted May 14, 2016 (edited) My first attempt at making a hummingbird feeder disguised cache. It has a 50ML vial inside for the log. My next challenge is to make the storage space larger. I have a 250ML Nalgene jar. So instead of a Micro, the next design could be a "Small"! Edited May 14, 2016 by kunarion Quote Link to comment
+SpookyDame Posted May 14, 2016 Share Posted May 14, 2016 Hypertufa Troll Toe Cache Quote Link to comment
+AmishHacker Posted May 24, 2016 Author Share Posted May 24, 2016 not a cache container, but thought I would share a few log books I made. was in home depot looking at some paint with the wife when I thought these samples would make a neat log book. going to place a sharpie with them to sign. Love this idea! Quote Link to comment
+kunarion Posted May 29, 2016 Share Posted May 29, 2016 A couple of weeks ago, I made a hummingbird feeder "Micro" cache. Now I've found a thick plastic cup (it has a lid with a rubber seal) and made a "Small". It can hold lots of great swag! 2 Quote Link to comment
+SpookyDame Posted August 4, 2016 Share Posted August 4, 2016 Some animal trashed the first stage of my fart machine geocache so I made another with cement- sure to be 'toof proof'. Behold! The Butt Boulder! It's hollow and holds another container with the remote and final coordinates. Quote Link to comment
+fuzziebear3 Posted August 4, 2016 Share Posted August 4, 2016 A couple of weeks ago, I made a hummingbird feeder "Micro" cache. Now I've found a thick plastic cup (it has a lid with a rubber seal) and made a "Small". It can hold lots of great swag! I bet the hummingbirds are disappointed Really cute, I like it. Quote Link to comment
+LycanthroFee Posted August 5, 2016 Share Posted August 5, 2016 Here's one I'm placing soon! Quack quack Quote Link to comment
+Clarkbowman Posted August 6, 2016 Share Posted August 6, 2016 Here's one I'm placing soon! Quack quack Nice Work, Quote Link to comment
+Jasper Ralph 13 Posted November 5, 2016 Share Posted November 5, 2016 Here's another one Hey, that's one of my caches! I'm like..., boy that looks like.., but wait..., wow..., it is..., cool! Thanks for recognizing and posting. Quote Link to comment
+kunarion Posted November 5, 2016 Share Posted November 5, 2016 Hey, that's one of my caches! I'm like..., boy that looks like.., but wait..., wow..., it is..., cool! Thanks for recognizing and posting. Where did you get the metal box? The galvanized metal blends in very nicely! Quote Link to comment
+Jasper Ralph 13 Posted November 5, 2016 Share Posted November 5, 2016 Hey, that's one of my caches! I'm like..., boy that looks like.., but wait..., wow..., it is..., cool! Thanks for recognizing and posting. Where did you get the metal box? The galvanized metal blends in very nicely! Thanks. I custom make these in my shop. Quote Link to comment
+kunarion Posted November 5, 2016 Share Posted November 5, 2016 Hey, that's one of my caches! I'm like..., boy that looks like.., but wait..., wow..., it is..., cool! Thanks for recognizing and posting. Where did you get the metal box? The galvanized metal blends in very nicely! Thanks. I custom make these in my shop. Sweet! Quote Link to comment
+susanbimini Posted November 17, 2016 Share Posted November 17, 2016 Shelly (GC6V1RH). She is filled with shells and decoy logs. The real log is in a bison tube on the outside. To access it, one has to locate the correct shell and twist it open. Quote Link to comment
+susanbimini Posted November 18, 2016 Share Posted November 18, 2016 Eye Opener (GC6TRA5), or as I like to think of it, "My little ball of fun". This guy has 11 prescription bottles epoxied into a ball with a green iguana guardian. Ten of the prescription bottles have reptile eyes painted on their lids and one bottle has a bird's eye painted on its' lid. The bird's eye bottle contains the log and the reptile eye bottles contain some fun little surprises! Quote Link to comment
+hzoi Posted November 18, 2016 Share Posted November 18, 2016 OK, clearly I need to get back down to Tallahassee. Quote Link to comment
+susanbimini Posted December 20, 2016 Share Posted December 20, 2016 Planning on setting this one out tomorrow... Quote Link to comment
+susanbimini Posted December 23, 2016 Share Posted December 23, 2016 Techno Owl 1 Quote Link to comment
+susanbimini Posted December 24, 2016 Share Posted December 24, 2016 Where did everybody go? I was hoping for a little feedback. I just starting hiding caches a couple months ago and they have had very little traffic. Of the 12 I've hidden, 5 have not been found. How sad is that? Figured if I posted pictures here someone would certainly have something to say, but no such luck. I just finished a really cool wasp nest, but what's the point of putting it out when no one seems to care? Guess I'm finished making geocaches for now. Sorry to complain about this here, I'm just very frustrated. Wish I'd stuck to just finding them and not hiding them. Quote Link to comment
+kunarion Posted December 24, 2016 Share Posted December 24, 2016 (edited) Where did everybody go? I was hoping for a little feedback. I just starting hiding caches a couple months ago and they have had very little traffic. Of the 12 I've hidden, 5 have not been found. How sad is that? Figured if I posted pictures here someone would certainly have something to say, but no such luck. I just finished a really cool wasp nest, but what's the point of putting it out when no one seems to care? Guess I'm finished making geocaches for now. Sorry to complain about this here, I'm just very frustrated. Wish I'd stuck to just finding them and not hiding them. At least one of your caches is in a quiet area. Caches don't seem to be found often there. But I'll bet that when they are found, people will be surprised by the fun container. They're pretty cool, I've never seen any like those. There's no time frame for when to expect people to find your cache. And people who view photos here can't always go find the caches. They're at least a few hours' drive away for me. Several of my caches get visited by me a lot more often than they get found. That can be a good thing, since the cache then remains in fine condition. If everybody and his monkey is finding them all the time, the caches tend to require more maintenance, and are found in less than ideal shape. Edited December 24, 2016 by kunarion Quote Link to comment
+susanbimini Posted December 24, 2016 Share Posted December 24, 2016 Thank you kunarion! I feel better after reading what you wrote. Plus, two people just tried to find some of them. Now I only have 3 that have not been found. I've gone from being all sad to feeling like a kid on Christmas morning. Quote Link to comment
+kunarion Posted December 24, 2016 Share Posted December 24, 2016 Thank you kunarion! I feel better after reading what you wrote. Plus, two people just tried to find some of them. Now I only have 3 that have not been found. I've gone from being all sad to feeling like a kid on Christmas morning. Cool! Quote Link to comment
elfre Posted December 25, 2016 Share Posted December 25, 2016 (edited) I was hoping for a little feedback. I just starting hiding caches a couple months ago and they have had very little traffic. Of the 12 I've hidden, 5 have not been found. How sad is that? Figured if I posted pictures here someone would certainly have something to say, but no such luck. Your owl is the most fabulous cache I've seen. If your hides were around here they'd be unlikely to go 24hrs without being found even if they were tricky puzzle caches but, as kunarion very sensibly pointed out, the fewer people manhandle your works of art then the longer they'll last out in the wild. I expect as you begin to get a good reputation as a cache owner then word of mouth (or facebook) will bring more finders to your caches. I look forward to seeing photos of your wasps nest container too. Happy hiding! Edited December 25, 2016 by elfre Quote Link to comment
+susanbimini Posted December 25, 2016 Share Posted December 25, 2016 Wow, what a difference a day made! Went from 5 unfounded to just 2, but one of those people have been trying to find so there is only one lonely guy left! And one of the locals from yesterday sent me a wonderful message about my hides. Then I read Elfre's fantastic response to my owl and I was on cloud 9 with happiness. Plus, I had not even considered a high traffic area leading to more damage. Amazing how I was blinded to that. It's such a good point that now I'm starting to think they might be better off with less people finding them. I've been completely re-motivated and now I'm excited to hang my wasp nest. I was thinking about calling it "Head Buzzer" and making the description full of geocaching abbreviations. I still need to work on the wording and add the beginning/ending, but something like: Some say that AMIAT is like a NIAH making one do a DBD, which is a WOTAG especially if they CRI and end up with a DNF. For those who do MTF, they'll need to BYOP to SL. The MKH is a popular option for GRC like EGGS and GRiMS, which are frequently CAAR placed on the ROW turning these P&G into QEFs where most just TNLNSL while trying to avoid any LEOs. For SWAG, TBs, or to TBD, a LNL is sometimes used. These are commonly hidden at the BOT maybe a TTT, MTT, or ICT. Although one should still keep an eye out for UPS, URP, SOOP, or OPR near GZ and make sure to avoid any PI. Hopefully, the caches will be FIGS and not NM or SBA. Here's the nest: Quote Link to comment
elfre Posted December 27, 2016 Share Posted December 27, 2016 Great wasp nest susanbimini. Here are a couple of cache containers that made me smile recently. I'm not sure if the second one will mean much to people outside the UK but it made me smile. The first one is a small bison tube that's hidden in an ICT (ignore the travel bug at lower left) because nanos in ivy covered trees are the nemeses of English cachers! Quote Link to comment
+susanbimini Posted December 27, 2016 Share Posted December 27, 2016 It's a bison on a bison, absolutely fantastic! The other one looks like a mini garbage can and is hilarious. Loved both of them. Quote Link to comment
+SpookyDame Posted January 2, 2017 Share Posted January 2, 2017 AHHHHH! These are all so inspiring!!!!!! That Techno Owl is straight up Art with a capital A. Regarding this thread- I went from getting notices of a new post to getting no notices since October? Quote Link to comment
+susanbimini Posted January 4, 2017 Share Posted January 4, 2017 Thank you Cemetery Sister. I'm really glad you like Techno Owl. I wonder why you aren't receiving the notifications. Let's see if you get a notice for this posting. Let us know, yes? Personally, I'm still trying to figure out how to post on this thing. I know I should respond directly to your post to make the box thing, but for some reason the space bar won't work when I try that way. Maybe there's a Moderator lurking around who will impart their wisdom upon us. Quote Link to comment
+TWINKofEP Posted January 4, 2017 Share Posted January 4, 2017 (edited) is there a reason I can't see the "posted pics". I see a few, and some links work, but most of this appears as an "x out" of picture image. never mind. right after I complained, the pictures rendered and I can see all the cool caches now. Edited January 4, 2017 by TWINKofEP Quote Link to comment
+niraD Posted January 4, 2017 Share Posted January 4, 2017 is there a reason I can't see the "posted pics".In general, the more recent the post, the more likely it is that the image is still visible. Unfortunately, some of the older posts in this thread refer to image locations that are no longer valid. Quote Link to comment
awya77 Posted February 14, 2017 Share Posted February 14, 2017 I love all the ones being shared! I hope I can find more caches like these... and one day make my own Quote Link to comment
elfre Posted February 15, 2017 Share Posted February 15, 2017 As this thread's been revived... I recently enjoyed standing in the middle of a wood playing nano-cache pinball. Quote Link to comment
+zoobum Posted March 13, 2017 Share Posted March 13, 2017 As this thread's been revived... I recently enjoyed standing in the middle of a wood playing nano-cache pinball. that is great! I want to make one now. Quote Link to comment
+captnemo Posted March 15, 2017 Share Posted March 15, 2017 A couple of weeks ago, I made a hummingbird feeder "Micro" cache. Now I've found a thick plastic cup (it has a lid with a rubber seal) and made a "Small". It can hold lots of great swag! I bet the hummingbirds are disappointed Really cute, I like it. In my nick of the woods, the hummingbirds would be buzzing you. Quote Link to comment
+barefootjeff Posted March 15, 2017 Share Posted March 15, 2017 (edited) This is one of mine. When placing the cache, the container was going to be just a standard Sistema (our equivalent of Lock'n'Lock) but when scouting for hiding places, I found this hollow in the embankment that looked like a miniature wombat hole, so what better than a miniature wombat? Edited March 15, 2017 by barefootjeff Quote Link to comment
+SlapShot44 Posted April 11, 2017 Share Posted April 11, 2017 (edited) A refurbished .50 cal ammo can that I gave a new camo paint job. This will be released in the very near future. Edited April 11, 2017 by SlapShot44 Quote Link to comment
+nutlady Posted April 20, 2017 Share Posted April 20, 2017 Its Halloween so I thought I should share my cache that I put out a few years ago. The hint for the cache was 'hanging' Having lost a son to suicide....this one would have disturbed me...... Quote Link to comment
+cliptwings Posted April 22, 2017 Share Posted April 22, 2017 My latest Arduino gadget container is patterned after the "Hangman" game. Instead of using a paper and pencil, the finder must successfully guess one of five words loaded on the arduino in order to open the container. The words are easy and mentioned in the description (hint). Here is link to the video: Quote Link to comment
+geocat_ Posted May 17, 2017 Share Posted May 17, 2017 My latest Arduino gadget container is patterned after the "Hangman" game. Instead of using a paper and pencil, the finder must successfully guess one of five words loaded on the arduino in order to open the container. The words are easy and mentioned in the description (hint). Here is link to the video: I LOVE IT! Quote Link to comment
+NacFam Posted June 26, 2017 Share Posted June 26, 2017 I have found some really cool things at the dollar stores/dollar general stores that I would like to attach plastic DNA tubes to like miniature gnomes and frogs, etc... Forgive me if this is a repeat of someone else's question but.... What "solidly" sticks things together and is waterproof? I've tried hot glue, crazy glue, E6000 and gorilla glue and they either break off easily or wash off when it rains. Any tricks or tips?? Will JB weld work on plastic? Quote Link to comment
+kunarion Posted June 26, 2017 Share Posted June 26, 2017 (edited) I have found some really cool things at the dollar stores/dollar general stores that I would like to attach plastic DNA tubes to like miniature gnomes and frogs, etc... Forgive me if this is a repeat of someone else's question but.... What "solidly" sticks things together and is waterproof? I've tried hot glue, crazy glue, E6000 and gorilla glue and they either break off easily or wash off when it rains. Any tricks or tips?? Will JB weld work on plastic? The thing I use most lately is a wrap of Velcro (the kind that sticks to itself) around the tube, and glue that pretty well, which provides a great surface for JB Weld or whatever you like, to glue an additional small item. And I also wrap a magnet into the Velcro, for ease of attachment (to a magnet clip on a branch or whatever). Now if you're intending to "glue" things to the cap of a centrifuge tube, good luck with that. You'll be replacing the whole thing frequently, regardless of the glue (or I usually see these get archived after they break). I gave up on centrifuge tubes before ever placing one. Just too fragile, and they are not designed to seal anything more than once or twice. I switched to match tubes and bison tubes for micros. But you could secure a plastic item to a cap, if you instead run a small screw through the bottom of the cap, into the item. Maybe use just enough "glue" (even craft glue) to keep the screw from backing out. As for how you place a centrifuge tube... poking it into the ground?... I'll leave that up to your further reading of the cache hiding guidelines, and your cache reviewer. Edited June 26, 2017 by kunarion Quote Link to comment
+colleda Posted June 26, 2017 Share Posted June 26, 2017 When using glue are you abrading, that is, roughing up the plastic surface to provide a "key"? Quote Link to comment
+NacFam Posted June 26, 2017 Share Posted June 26, 2017 No. But good idea!! Thanks Quote Link to comment
+NacFam Posted June 26, 2017 Share Posted June 26, 2017 Ugh. I love the DNA tubes. I got like 500 for $5.00 lol Velcro didn't even cross my mind. Definitely a great idea Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.