+Prfctly Mad Posted January 26, 2008 Share Posted January 26, 2008 I have had a cache out for awhile (GCKJDH) and it is located on a Small Island in a saltwater marsh. I like the cache and the location but the saltwater is eating up Ammo boxes, I am looking for one of two things, A way to make ammo boxes more rust/saltwater resistant or a different container. (Not Micro) I have tried the different tupperware type containers and they fare far worse than the ammo boxes. I have thought about using a rust-olem primer and a marine hull paint on the ammo boxes but I am not positive this would help. Does anyone have any suggestions, I don't want to archive it but I also don't want to replace it every few months. The ammo boxes stay watertight.. the just get rusted shut Quote Link to comment
+WRASTRO Posted January 26, 2008 Share Posted January 26, 2008 I would think the primer and marine grade paint over the entire surface would be a big help but a cache in that environment is going to need more frequent maintenance than one in the woods. Maybe a container made of fiberglass would work but you would need to find one that is water tight. Quote Link to comment
+J10fly Posted January 26, 2008 Share Posted January 26, 2008 The only thing i could think of would be to try a pelican container. Salt will still probably eventually eat at the orings but it's tough to say what else would work. Quote Link to comment
+briansnat Posted January 27, 2008 Share Posted January 27, 2008 Not a getting started issue. Moving to general forum. Quote Link to comment
+Renegade Knight Posted January 27, 2008 Share Posted January 27, 2008 One thing you can do is paint it as suggested. You can also attach a sacrificial anode to the cache and replace that once in a while instead of the cache. I suspect though the cost of the anode would be more than replacing ammo cans. I think for durability a Pelican Container type container with plastic or non corroding hinges is the best one going. Quote Link to comment
+Isonzo Karst Posted January 27, 2008 Share Posted January 27, 2008 I have a large wide mouth thermos in service as a cache on an isle in the Gulf of Mexico. It's been out a year in a shaded spot. But it's doing okay so far. I assume eventually sunlight will destroy the plastic. I bought it and a couple more for $1 each at a Good Will. Quote Link to comment
+briansnat Posted January 27, 2008 Share Posted January 27, 2008 (edited) How about a Nalgene (lexan) water bottle, painted so that the sun doesn't affect it as much? Edited January 27, 2008 by briansnat Quote Link to comment
+WRASTRO Posted January 27, 2008 Share Posted January 27, 2008 How about a Nalgene (lexan) water bottle, painted so that the sun doesn't affect it as much? That could work. Or even scuffed up a bunch to reduce the reflections. Quote Link to comment
+Renegade Knight Posted January 27, 2008 Share Posted January 27, 2008 How about a Nalgene (lexan) water bottle, painted so that the sun doesn't affect it as much? That could work. Or even scuffed up a bunch to reduce the reflections. I'll third that. Quote Link to comment
+pigpen4x4 Posted January 27, 2008 Share Posted January 27, 2008 I'ts been quite a while ago, but I saw a plastic ammo can at (I think) Northern Tools. It looked very much like a ammo can, and was about the same size. I just dismissed it, as I wasn't Geocaching then, and I had a few real ones laying around. Quote Link to comment
+homeseller Posted January 27, 2008 Share Posted January 27, 2008 http://www.berrysmfg.com/76.php Quote Link to comment
+Rattlebars Posted January 27, 2008 Share Posted January 27, 2008 PVC? Has it's drawbacks, but is really cheap! Quote Link to comment
MarcusArelius Posted January 27, 2008 Share Posted January 27, 2008 Hmmm, a remote controled potato mortar?? Quote Link to comment
stevezampino Posted January 27, 2008 Share Posted January 27, 2008 I have had a cache out for awhile (GCKJDH) and it is located on a Small Island in a saltwater marsh. I like the cache and the location but the saltwater is eating up Ammo boxes, I am looking for one of two things, A way to make ammo boxes more rust/saltwater resistant or a different container. (Not Micro) I have tried the different tupperware type containers and they fare far worse than the ammo boxes. I have thought about using a rust-olem primer and a marine hull paint on the ammo boxes but I am not positive this would help. Does anyone have any suggestions, I don't want to archive it but I also don't want to replace it every few months. The ammo boxes stay watertight.. the just get rusted shut testing Quote Link to comment
+lindsychris Posted January 27, 2008 Share Posted January 27, 2008 I'ts been quite a while ago, but I saw a plastic ammo can at (I think) Northern Tools. It looked very much like a ammo can, and was about the same size. I just dismissed it, as I wasn't Geocaching then, and I had a few real ones laying around. If this is what I think it is, they're usually sold as "dry boxes". In our experience with them though, they aren't very good at staying dry! They do have a latch like an ammo can, and an o-ring, but they don't seal nearly as tight, and because they're plastic, the sides tend to move/warp over time, which allows water to get in. Quote Link to comment
+briansnat Posted January 27, 2008 Share Posted January 27, 2008 PVC? Has it's drawbacks, but is really cheap! I've never found a cache in a PVC pipe that was dry inside. Not one and I've found dozens. As far as being cheap, I priced the parts at Home Depot one day. Came to $14. If you have the parts laying around, it can be cheap, but if you have to buy them the cost adds up. Quote Link to comment
+JohnnyVegas Posted January 27, 2008 Share Posted January 27, 2008 How about a dry bag, they are sold a shops the sell kayaks. Quote Link to comment
+briansnat Posted January 27, 2008 Share Posted January 27, 2008 How about a dry bag, they are sold a shops the sell kayaks. That's a good idea. I'm not sure how well they hold up with extended exposure to the weather, but maybe it's worth a try. Quote Link to comment
+JohnnyVegas Posted January 27, 2008 Share Posted January 27, 2008 here is a link Dry bags some are built very well and will last quite a while. It might be a good idea to include directions out how to close one on the cache page. Quote Link to comment
CoyoteRed Posted January 27, 2008 Share Posted January 27, 2008 ...the just get rusted shut Is the latches rusting shut? I've seen more hinges rusting than the latch. If so, find an ammo box with a double latch. If the latch is rusting shut there's not much paint or whatever can help. If the sides are rusting and making it stay shut, then bend the sides of the lid out a little bit so it doesn't rub the main container. You didn't mention if the container is getting submerged or if the salt spray is affecting it. If it is not getting submerged maybe a shallow platform and a cover. A piece of that cubed ceiling tile that goes over the fluorescent lights could act as a nice platform. Then cut and carve a log large enough to go over the ammo box as a cover. If the sand stays mostly dry on which it is sitting a gillie suit of sorts might be fashioned to cover the container to keep the salt spray off it. You'd have to play with something that will keep the spray off, but allow condensation out. On that note, what about a plastic container that will fit in an ammo can? Paint and camo the can, sans lid, to act a cover and protector for the plastic container which will keep the contents dry. Might have to cut holes in each of the bottom corners of the can to keep water from collecting. Just a few suggestions that hopefully will spark an idea. Quote Link to comment
+Wabash-Riverrat Posted January 27, 2008 Share Posted January 27, 2008 Hmmm, a remote controled potato mortar?? No response yet I am very interested. What do we have in the photo? Quote Link to comment
+JohnnyVegas Posted January 27, 2008 Share Posted January 27, 2008 I think it is an early verion of a flux capicitor Quote Link to comment
+Team Cotati Posted January 27, 2008 Share Posted January 27, 2008 PVC? Has it's drawbacks, but is really cheap! What did that cost you? Quote Link to comment
+elmuyloco5 Posted January 27, 2008 Share Posted January 27, 2008 Have you thought about making one out of acrylic? It's used to make aquariums and can be purchased at a reasonable cost at Lowes and Home Depot. You can easily seal almost the whole thing with aquarium grade silicone. The upper portion of the container you could use a large rubber o-ring, and the hinges will last through the saltwater if you buy stainless steel (also available at the same stores). It would be pricier than an ammo, but cheaper than having to keep replacing the ammo can. Acrylic paints really easily too. Quote Link to comment
Snarf93 Posted January 27, 2008 Share Posted January 27, 2008 the acrylics idea is good same wit pvc. maybe if plastic is breaking from sun exposier then create a casing for it out of wood or something that isnt effected by sunlight. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.