+Ragged Robin Posted September 2, 2009 Share Posted September 2, 2009 Hi guys.....I am looking for Camo paint either spray or bottle. The one type I am after is suitable for plastic so it wont melt the cache container. Any ideas. regards Ragged Robin Quote Link to comment
+kunarion Posted September 2, 2009 Share Posted September 2, 2009 (edited) suitable for plastic so it wont melt the cache container. Robin, Try "Krylon Camouflage" spray paint (hope it's available where you live -- I get it from the local Mall*Wart). That even works on a Dollar Store plastic Lock-N-Lock. If you're painting slick flexible plastic, rough it up a little with emery cloth first. Edited September 2, 2009 by kunarion Quote Link to comment
+Colonial Cats Posted September 2, 2009 Share Posted September 2, 2009 suitable for plastic so it wont melt the cache container. Robin, Try "Krylon Camouflage" spray paint (hope it's available where you live -- I get it from the local Mall*Wart). That even works on a Dollar Store plastic Lock-N-Lock. If you're painting slick flexible plastic, rough it up a little with emery cloth first. Agreed. I believe most Wal-Marts have this. If I remember right, you can get it in black, tan, green, and brown. Get a can of each and go wild! Quote Link to comment
+Ragged Robin Posted September 2, 2009 Author Share Posted September 2, 2009 suitable for plastic so it wont melt the cache container. Robin, Try "Krylon Camouflage" spray paint (hope it's available where you live -- I get it from the local Mall*Wart). That even works on a Dollar Store plastic Lock-N-Lock. If you're painting slick flexible plastic, rough it up a little with emery cloth first. Thanks.....will look into it. RR Quote Link to comment
+Severnside Posted September 2, 2009 Share Posted September 2, 2009 Hi Robin You could pop into your local modelshop and get those small tins of paint used to paint plastic models such as Airfix and Revell aeroplanes and tanks etc. Full range of colurs - not going to melt the plastic and lots of examples of camo patterns etc. on display Good luck John Quote Link to comment
+Night Stalker Posted September 3, 2009 Share Posted September 3, 2009 I have also found smaller cans in an archery shop. A lot of the older bows are not camo'd so this allows them to camo their own design. Quote Link to comment
+mospeed1 Posted September 3, 2009 Share Posted September 3, 2009 just buy some cheap spray paint...just make sure it's a flat color,and sand the plastic 1st Quote Link to comment
+Gitchee-Gummee Posted September 3, 2009 Share Posted September 3, 2009 The "Krylon"s (camouflage paint) are best. Come in a small variety of earthtone colors, all of them are completely flat with no shine. We use them exclusively. Removes all shine from anything, that is the most desirable feature. Quote Link to comment
+iclight0 Posted September 3, 2009 Share Posted September 3, 2009 i work at lowes and that where i bought mine, green ,sand Quote Link to comment
+JackQuest Posted September 3, 2009 Share Posted September 3, 2009 Krylon definitely the way to go. Quote Link to comment
PastorJon Posted September 3, 2009 Share Posted September 3, 2009 Do you all use a template of some sort? Or do you paint it all in a base color and then add other colors on top in random circles/lines? Quote Link to comment
+kunarion Posted September 3, 2009 Share Posted September 3, 2009 (edited) Do you all use a template of some sort? Or do you paint it all in a base color and then add other colors on top in random circles/lines? If you break up the shape of the container with natural colors, and it blends well into the background, you're good to go. But you can make it more interesting with a template. I painted a box green, then found ferns and other leaves, laid out the leaves, and over-painted in brown. There's a local cache that has "animal tracks" from a handmade stencil. Think of a creative version of "camo", and you can make a more memorable container. Edited September 3, 2009 by kunarion Quote Link to comment
+Jeep4two Posted September 4, 2009 Share Posted September 4, 2009 Another vote for the Krylon Fusion Camo Paints. They are 'Ultra Flat' and have a great no glare finish. I've only got two caches hidden right now but they are dollar store lock n locks that I painted with the Krylon paints. They look great and are holding up wonderfully. Remember, give your paint at least 48 hours to cure in low humidity before placing in the wild. I gave mine about a week just due to my schedule but the tackiness was gone after about 2 days. The cost for the quality paints is higher, but the benefit to me is way beyond the price. You can go with a cheaper container and the paint will provide a no glare finish that will help protect the plastic from the UV of the sun and other elements. I will be using the same paints for my ammo cans that I have and hope to place soon. Best of luck. Quote Link to comment
+briansnat Posted September 4, 2009 Share Posted September 4, 2009 (edited) Do you all use a template of some sort? Or do you paint it all in a base color and then add other colors on top in random circles/lines? I use a base of a flat, green. Then I just use random squirts of black and brown. Sometimes if I'm feeling creative I use an oak leaf as a template, laying it on the container, spraying, them moving it and spraying it Comes out nice. See the one in the back, below: Here is the oak leaf pattern along with the random splotch method. Edited September 4, 2009 by briansnat Quote Link to comment
+Jeep4two Posted September 5, 2009 Share Posted September 5, 2009 Do you all use a template of some sort? Or do you paint it all in a base color and then add other colors on top in random circles/lines? I use a base of a flat, green. Then I just use random squirts of black and brown. Sometimes if I'm feeling creative I use an oak leaf as a template, laying it on the container, spraying, them moving it and spraying it Comes out nice. See the one in the back, below: Here is the oak leaf pattern along with the random splotch method. Very nice Briansnat - I like 'em. I'm donating an ammo can at the 2009 Indiana Fall Picnic next weekend and have to paint it this weekend. I'm going to use that concept along with my Krylon paints on the 50cal can. I've got a nice Pin Oak in the yard that will gladly donate some stencil leaves I need to get the lettering stencil one of these days. Quote Link to comment
+Wild Thing 73 Posted September 5, 2009 Share Posted September 5, 2009 Can of Black paint and Green paint and have fun. wal-mart has them for 96 cents each...Just bought some more today. Stay safe. This paint is much cheaper then the tape... Quote Link to comment
+popokiiti Posted September 5, 2009 Share Posted September 5, 2009 Popoki Nui is becoming the dab hand at this...sands Lock'n'Locks, quick spray with whatever the base coat(s) is(are) to be, when dry, uses fallen twigs, branches with fronds (fir and cedar work well), or leaves as stencils to spray the next coat. Tremclad or Krylon, or anything you can paint plastic patio furniture with. Make sure it is matt. Even a straight black has worked well - in a certain location ! Main colours used are black, sand and green. Thanks for the tip on WM's pricing...what brands should we look for please? Oh - plenty of fresh air when doing this is a good idea, but we all know that.... Quote Link to comment
PastorJon Posted September 5, 2009 Share Posted September 5, 2009 when you sand your lock-n-locks, do you use a sandpaper? Or a liquid deglosser? What type? Quote Link to comment
+Arrow42 Posted September 6, 2009 Share Posted September 6, 2009 when you sand your lock-n-locks, do you use a sandpaper? Or a liquid deglosser? What type? Fine-grit sandpaper. Not used a de-glosser before... not sure if its any better or not. Quote Link to comment
+Gitchee-Gummee Posted September 6, 2009 Share Posted September 6, 2009 Could be wrong......... but doesn't deglosser work only on oil-based enamels? I do like the Krylon tho, it's made for plastic and won't destroy it, ultra-flat if Krylon camo paint. Simple quick spray gets rid of most all shine. Quote Link to comment
+popokiiti Posted September 6, 2009 Share Posted September 6, 2009 We just use sandpaper... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.