+Douce Us 5 Posted August 6, 2009 Share Posted August 6, 2009 I'm looking to hide my first cache, what do you use to be able to tell if a cache you want to place is far enough away from another cache? Is there a way to see that on the Geocaching site? Is there a good map site? Thanks in advance. Quote Link to comment
+GIDEON-X Posted August 6, 2009 Share Posted August 6, 2009 (edited) Go to the "Hide & Seek" page, enter the lat / Lon of the location of your planned hide.........this will give all the caches in a given radius and the distance to your spot..... Edited August 6, 2009 by GIDEON-X Quote Link to comment
+Chrysalides Posted August 6, 2009 Share Posted August 6, 2009 Go to the "Hide & Seek" page, enter the lat / Lon of the location of your planned hide.........this will give all the caches in a given radius and the distance to your spot..... Ye Gods.. the font! Anyway, that's mostly accurate, and there's no easy way to do any better. You won't have the finals for puzzles and multistages, and you won't see intermediate stages of a multistage (those that include a physical clue you have to find). Your only other option is either to solve / find all the multistage and puzzles, or ask your local reviewer. By the way, if there is a tool that will draw a 0.1 mile circle around each cache and shade it a certain color, it would be most helpful. Anyone? Quote Link to comment
+cron Posted August 6, 2009 Share Posted August 6, 2009 (edited) By the way, if there is a tool that will draw a 0.1 mile circle around each cache and shade it a certain color, it would be most helpful. Anyone? You can easily achieve that with Mapsource for multiple waypoints at the same time, otherwise you'll have to use Google Earth (the KML Circle Generator), but you'll have to do it for each and every waypoint. Please note both tools will draw a circle, but not make any shades. Maybe it would be possible to tweak the KML thing, but I'm not sure. Edited August 6, 2009 by cron Quote Link to comment
+salem65 Posted August 7, 2009 Share Posted August 7, 2009 I'm looking to hide my first cache, what do you use to be able to tell if a cache you want to place is far enough away from another cache? Is there a way to see that on the Geocaching site? Is there a good map site? Thanks in advance. I run a pocket query for the area I am planning on placing in, load it into my gps, and head out into the field. When I find a good spot, I check the gps for the nearest caches, if there is nothing too close, I hide my container and mark it. I always double check online before I submit, using methods already mentioned. As stated earlier this method won't help with multi's and puzzles either. The more caches you do in your area the easier you will be able to avoid those. Quote Link to comment
+todd300 Posted August 7, 2009 Share Posted August 7, 2009 I was about to post a question regarding this rule, but I might as well use this thread to do so. I have my sights set on a spot for a cache which is about 500 feet away from another cache nearby. Yes, it's too close to the other cache. However, there is a body of water between my chosen spot and the other cache and a person will have to walk about a half mile around the body of water to get to the other cache from my chosen spot, therefore making the actual distance from my chosen spot longer than 500 feet. I'm debating placing a cache there, but will not waste time doing so if it still falls under the 528 foot rule. Quote Link to comment
+Prime Suspect Posted August 7, 2009 Share Posted August 7, 2009 I was about to post a question regarding this rule, but I might as well use this thread to do so. I have my sights set on a spot for a cache which is about 500 feet away from another cache nearby. Yes, it's too close to the other cache. However, there is a body of water between my chosen spot and the other cache and a person will have to walk about a half mile around the body of water to get to the other cache from my chosen spot, therefore making the actual distance from my chosen spot longer than 500 feet. I'm debating placing a cache there, but will not waste time doing so if it still falls under the 528 foot rule. Asking here is pointless. All you'll get are opinions. That and $5 will get you a footlong at Subway. You need to email your local reviewer with your approximate coordinates, and see what he or she says. Quote Link to comment
+Chrysalides Posted August 7, 2009 Share Posted August 7, 2009 You need to email your local reviewer with your approximate coordinates, and see what he or she says. Don't forget to explain the special circumstances (body of water) as well. The cache saturation rule is not carved in stone and each reviewer has the freedom to waive it as they see fit. Quote Link to comment
+Chrysalides Posted August 7, 2009 Share Posted August 7, 2009 By the way, if there is a tool that will draw a 0.1 mile circle around each cache and shade it a certain color, it would be most helpful. Anyone? You can easily achieve that with Mapsource for multiple waypoints at the same time, otherwise you'll have to use Google Earth (the KML Circle Generator), but you'll have to do it for each and every waypoint. Please note both tools will draw a circle, but not make any shades. Maybe it would be possible to tweak the KML thing, but I'm not sure. Thanks for the info, I'll experiment with that. Quote Link to comment
Motorcycle_Mama Posted August 7, 2009 Share Posted August 7, 2009 I was about to post a question regarding this rule, but I might as well use this thread to do so. I have my sights set on a spot for a cache which is about 500 feet away from another cache nearby. Yes, it's too close to the other cache. However, there is a body of water between my chosen spot and the other cache and a person will have to walk about a half mile around the body of water to get to the other cache from my chosen spot, therefore making the actual distance from my chosen spot longer than 500 feet. I'm debating placing a cache there, but will not waste time doing so if it still falls under the 528 foot rule. In addition to the suggestions above to explain the situation to your reviewer, it's also helpful to send pictures and/or aerial photos showing the location and the obstacles. Quote Link to comment
+briansnat Posted August 7, 2009 Share Posted August 7, 2009 You need to email your local reviewer with your approximate coordinates, and see what he or she says. Don't forget to explain the special circumstances (body of water) as well. The cache saturation rule is not carved in stone and each reviewer has the freedom to waive it as they see fit. Photos can also help. Add a few photos of the area of the other cache shot from your potential location. If you can give the exact distance of the walk between the caches that will be helpful. The more information you can provide the reviewer the better for you. Quote Link to comment
Andronicus Posted April 14, 2010 Share Posted April 14, 2010 By the way, if there is a tool that will draw a 0.1 mile circle around each cache and shade it a certain color, it would be most helpful. Anyone? You can easily achieve that with Mapsource for multiple waypoints at the same time, otherwise you'll have to use Google Earth (the KML Circle Generator), but you'll have to do it for each and every waypoint. Please note both tools will draw a circle, but not make any shades. Maybe it would be possible to tweak the KML thing, but I'm not sure. Thanks for the info, I'll experiment with that. BUMP Anyone know of a tool to draw circles around caches? Quote Link to comment
+Douce Us 5 Posted April 14, 2010 Author Share Posted April 14, 2010 I use Google Earth.....you can put a pin in the exact coordinates where there are known caches and then use the ruler function to find out where 528feet away from it would be. Quote Link to comment
jholly Posted April 14, 2010 Share Posted April 14, 2010 By the way, if there is a tool that will draw a 0.1 mile circle around each cache and shade it a certain color, it would be most helpful. Anyone? You can easily achieve that with Mapsource for multiple waypoints at the same time, otherwise you'll have to use Google Earth (the KML Circle Generator), but you'll have to do it for each and every waypoint. Please note both tools will draw a circle, but not make any shades. Maybe it would be possible to tweak the KML thing, but I'm not sure. Thanks for the info, I'll experiment with that. BUMP Anyone know of a tool to draw circles around caches? mapsource or GSAK macros. Quote Link to comment
+monahmat Posted April 14, 2010 Share Posted April 14, 2010 I too am curious about drawing circles with Mapsource. I have been able to do proximity circles in Magellan Vantage Point Software but never in Garmin Mapsource. If this can be done could someone give a quick How To or point us in the right direction? A Google Earth solution would also work. The KML Circle Generator works but there must be a easier way for multiple points using mapsource, or so I would think. The help is appreciated! Quote Link to comment
jholly Posted April 14, 2010 Share Posted April 14, 2010 I too am curious about drawing circles with Mapsource. Waypoint properties. Uncheck proximity circles and enter 0.1 mi. Quote Link to comment
+adenium Posted April 14, 2010 Share Posted April 14, 2010 I'm a very visual kind of person, so if you can show me on a map that's the ticket. I will use Google Earth if I'm trying to figure out if a potential cache site will be too close to an existing one. In cases where I want to sneak one inside a cluster, I use something like MapWindow or qGIS to create 528' buffer around the existing caches in a cluster and then I can see where the gaps are. I'm not advocating cache saturation, just sayin'! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.