TheWiz Posted January 28, 2005 Author Share Posted January 28, 2005 Well, I guess I'll load this Beta v3.61 and see if it fixed our original issue here. I should know if it is fixed and post my observation within a day or so....so stay tuned. Steve Quote Link to comment
+Ptarmigan Posted January 28, 2005 Share Posted January 28, 2005 No I haven't tried the upgrade as it doesn't mention this issue. I was trying to find out if its the same issue as this topic or something different. As for the upgrade, its still in Beta, and was going to wait a few day before updating. I'll be watching for feed back from others. Quote Link to comment
+WxGuesser Posted January 28, 2005 Share Posted January 28, 2005 Any feedback on this beta software yet? I just got my email notification and i'm wondering if it is safe... Quote Link to comment
+Sputnik 57 Posted January 28, 2005 Share Posted January 28, 2005 Well, I guess I'll load this Beta v3.61 and see if it fixed our original issue here. I should know if it is fixed and post my observation within a day or so....so stay tuned. Steve Thanks for keeping us posted, Steve. I'm hoping this fixes the bug. Quote Link to comment
Ddogxxx Posted January 30, 2005 Share Posted January 30, 2005 I've had my 60cs on car power for the last 4 months. Just moved to a new state and am trying to learn to get around! Never had a lockup yet while hooked to the lighter. The First 60cs I bought lasted a week before a fatal powerdown occured. Nothing anyone tried could get it to power on. The second unit is the same one I have now, and even though you folks seem to use more of the track back than I do, It's been problem free. Just wish I could recharge the nimH batteries while they are in the unit! Been all over creation with mine in Utah and Colorado and other than being very afraid of scratching the screen, I love it! I think I will like the fix for the menus in the new update though. Quote Link to comment
TheWiz Posted January 31, 2005 Author Share Posted January 31, 2005 This is the "Lock Ups in TrackBack of saved tracks" thread. This thread is pertaining to the lock ups experienced when the trip computer display is on screen with a field on that display filled with a "waypoint at destination" setting during active trackback navigation. Please check other threads for discussion on your lockup type.....tnx Quote Link to comment
+KaTooM Posted January 31, 2005 Share Posted January 31, 2005 I installed 3.61 and it still locks up on track back while running on the batteries. I did find something interesting. I left the GPS in "hung" mode until I got home, then I removed the batteries and looked at the track log, even though the GPS was hung it was still tracking where I had been. Quote Link to comment
TheWiz Posted January 31, 2005 Author Share Posted January 31, 2005 The v3.61 release does not appear to have addressed our problem, my unit is still doing it. Quote Link to comment
+WxGuesser Posted January 31, 2005 Share Posted January 31, 2005 The v3.61 release does not appear to have addressed our problem, my unit is still doing it. well is the other stuff cool? i'm not a sky diver.. but that program seems kinda interesting. Quote Link to comment
TheWiz Posted January 31, 2005 Author Share Posted January 31, 2005 Just sent to Garmin: See highlighted below: Was this a fix for our previously discussed unit lockup with "waypoint at destination" in a trip computer display field during active navigation in trackback with trip computer diplay continuously on screen undisterbed? Steve Changes made from version 3.60 to 3.61: Now report DEM map support to PC software. Fixed lockup that could happen when selecting a Tracback point. Fixed shutdown caused by viewing some Marine Light points. Fixed problem with Indonesian Southern Grid using wrong longitude Quote Link to comment
TheWiz Posted February 2, 2005 Author Share Posted February 2, 2005 Garmin's response: Yes, this is the part within the update which fixed your " lock-up. Thanks Reply to Garmin: I hate to say it....but if that was the fix, it didn't work. I don't know what they think!.. they fixed. For what it's worth, here again in short is the problem we have in the 60cs: With v3.61Beta installed: Whole unit lockups still happen with "waypoint at destination" in a (trip computer) display field during active navigation in trackback with the trip computer display continuously on screen with no button pushing until lockup occurs. With that said, my next request is for an engineering contact that I can consult with directly on this matter. This is pretty much the last straw for me now having put up with this problem for a year in this unit and other copies of the 60cs I've used trying to get one that works. Considering your product involves the safety of the general public, (both the GPS user) and the (Non-User)... no Garmin system should ever be released for purchase until that design can be offered in a reliable form. My intent was to buy a navigation system, not a Fischer Price geocache toy. You will never know how many hours I have put into helping Product Support troubleshoot these issues and many others I have found in the unit that still go unfixed. This system is so far from ready to be released to the public and yet Garmin continues adding features to the 60cs while the basics don't work right. I can't even begin to tell you just how disgusted I am with Garmin products and the lack of effective support on the several occasions that I've needed it. Which...so happens to be why I've made no further moves to purchase any other overpriced products or accessories that Garmin offers. For this reason I will most likely be returning the unit for a full refund if this highly essential function is not fixed by April, the one year anniversary of my dealing with these buggy 60cs units. So that we can get to the bottom of this and a bunch of other 60cs problems, ASAP.... please pass along the necessary contact information for your engineering department where I can give them the straight poop on this and other issues with this system that remains unreliable. Quote Link to comment
+misguidedone Posted February 3, 2005 Share Posted February 3, 2005 I too have a 60CS which locks up daily at exactly the same point, only while viewing the map page. Beta 3.61 was of no help. Garmin would like me to send my unit back. Quote Link to comment
TheWiz Posted February 3, 2005 Author Share Posted February 3, 2005 Well, here's Garmin's latest response: After talking with the one of the guys working with the 60 issues, and about this problem, he notified me that he has fixed the problem but was not able to release this fix in time for the beta version. Since this is just a beta version, complete versions are always release after the beta version, which will include this fix. I apologize about the previous response which said this fix was included in this beta versions when it wasn't. Am confident in the next complete version the fix will be there. Quote Link to comment
+Sputnik 57 Posted February 3, 2005 Share Posted February 3, 2005 . . . and he promises that he will still respect you in the morning. Quote Link to comment
+WxGuesser Posted February 4, 2005 Share Posted February 4, 2005 Did he mention how long it'll be til the complete version is released? Quote Link to comment
+Sputnik 57 Posted March 20, 2005 Share Posted March 20, 2005 Has anyone tried to replicate this bug after installing 3.7? I'd like to update the FAQ if 3.7 actually fixes this problem. Quote Link to comment
TheWiz Posted March 23, 2005 Author Share Posted March 23, 2005 Good news everyone...It appears that our lockup of the 60cs that required battery removal if you were using "Waypoint at destination" within any of the Trip Computer display fields during continuous display of the trip computer in active trackback navigation...has been fixed. It only took nine months of my persistant testing and reporting to Garmin to get it done but I'm glad to report that today you have a better working GPS than the one you bought with any version prior to 3.70 for the 60cs and I suppose the 60c or any related model you may own. You're welcome, Steve Quote Link to comment
TheWiz Posted March 23, 2005 Author Share Posted March 23, 2005 To my liaison at Garmin who helped get it done: Good job Joey...you got it done and before April 1st.... So, I'll be keeping my 60cs. Many thanks, Steve Quote Link to comment
Miracle20 Posted March 26, 2005 Share Posted March 26, 2005 The 3.70 update has solved all of my lock up problems here on Oahu. Thanks garmin. Quote Link to comment
+The Cache Houndz Posted March 27, 2005 Share Posted March 27, 2005 Ok, I've got a lock up problem with my 60C. It's when I use the Find function, then select a waypoint, then select Go To, then when I choose Follow Road or Off Road... my 60C randomly locks up before it gets to "Calculating...". To clear it, I have to remove the batteries, then power back up. I'm using ver. 3.7 of the firmware. I just got my 60C 4 days ago, and one of the first things I did was update the firmware, so I can't compare the problem with an earlier version. Has anyone else seen this lock up problem with their 60 series? Quote Link to comment
+benjamin921 Posted March 27, 2005 Share Posted March 27, 2005 Ok, I've got a lock up problem with my 60C. It's when I use the Find function, then select a waypoint, then select Go To, then when I choose Follow Road or Off Road... my 60C randomly locks up before it gets to "Calculating...". To clear it, I have to remove the batteries, then power back up. I'm using ver. 3.7 of the firmware. I just got my 60C 4 days ago, and one of the first things I did was update the firmware, so I can't compare the problem with an earlier version. Has anyone else seen this lock up problem with their 60 series? Yes - 60CS Quote Link to comment
TheWiz Posted March 27, 2005 Author Share Posted March 27, 2005 This thread addresses the now resolved issue of "lockups during trackback navigation of a saved tracked" Found at fault was the failing function of any trip computer display field when "waypoint at destination" was being used in one of the fields. Please see http://forums.Groundspeak.com/GC/index.php...ic=72160&st=700 this thread for your general lockup questions. Steve Quote Link to comment
+stantastic Posted March 28, 2005 Share Posted March 28, 2005 Yes, me also -- 60CS -- v3.7 of the software definitely has a lockup problem -- too many posts over this last weekend by too many people to deny that a fix is needed... Quote Link to comment
gps_mountainbiker Posted March 31, 2005 Share Posted March 31, 2005 In my case version 3.70 of the firmware solves the lockup that happened when tracbacking using a Garmin GPSMap 60CS. In my case the exact problem solved was: Tracback feature - When selecting a tracback point either with the active tracklog or a saved one the unit freezes when selecting the point to trackback to. This happens 100% of the time if the routing "guidance method" is set to "promted" and you select "follow track". The unit does not freeze if the "guidance method" is set to "off road". It took a while to be solved but it is nice news that Garmin cares about customers. Note, although bete 3.61 claimed to solve the problem it was not true. Version 3.70 of the firmware is the one that solves the problem described above. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.