+evilfoot Posted September 11, 2016 Share Posted September 11, 2016 Lately I can't run a map on any pocket query that is built on a bookmark list. The map that comes up is the one of my home location caches. Sometimes I can get one on a PQ that is run on its own (e.g.-to show multis I haven't found) but it's slow. Has anyone else had this trouble? Evilfoot Quote Link to comment
+NanCycle Posted September 11, 2016 Share Posted September 11, 2016 Lately I can't run a map on any pocket query that is built on a bookmark list. The map that comes up is the one of my home location caches. Sometimes I can get one on a PQ that is run on its own (e.g.-to show multis I haven't found) but it's slow. Has anyone else had this trouble? Evilfoot Don't know if it's exactly the same as you described, but I intermittently get only my home location map instead of a requested map. If I wait a "while" it gets to be working okay again; problem comes and goes. Quote Link to comment
+Traveling Armadillos Posted September 16, 2016 Share Posted September 16, 2016 I have had this same issue. I create PQs based on my bookmark lists and map them. The map oftentimes pops up with all caches (not just those on the PQ), and it is centered on my home location. I use the map feature for most of my trip planning and would like to see this issue resolved. Quote Link to comment
+HHL Posted September 16, 2016 Share Posted September 16, 2016 Lately I can't run a map on any pocket query that is built on a bookmark list. The map that comes up is the one of my home location caches. Sometimes I can get one on a PQ that is run on its own (e.g.-to show multis I haven't found) but it's slow. Has anyone else had this trouble? Evilfoot No. It's just an issue with a slow connection speed. Hans Quote Link to comment
+Mineral2 Posted September 16, 2016 Share Posted September 16, 2016 Does it work if you select the PQ from the map as opposed to following the map link on the PQ list page? Quote Link to comment
+evilfoot Posted September 17, 2016 Author Share Posted September 17, 2016 Lately I can't run a map on any pocket query that is built on a bookmark list. The map that comes up is the one of my home location caches. Sometimes I can get one on a PQ that is run on its own (e.g.-to show multis I haven't found) but it's slow. Has anyone else had this trouble? Evilfoot No. It's just an issue with a slow connection speed. Hans My connection speed is fine. It happens on several computers. Quote Link to comment
+evilfoot Posted September 17, 2016 Author Share Posted September 17, 2016 Does it work if you select the PQ from the map as opposed to following the map link on the PQ list page? I select the map option on the PQ list page. I don't know how else to see the PQ map. Quote Link to comment
+Mineral2 Posted September 17, 2016 Share Posted September 17, 2016 Does it work if you select the PQ from the map as opposed to following the map link on the PQ list page? I select the map option on the PQ list page. I don't know how else to see the PQ map. On the map page... the normal map page, switch the left-hand panel from "search" to "pocket queries" and select you query from the list. Quote Link to comment
+evilfoot Posted September 17, 2016 Author Share Posted September 17, 2016 Does it work if you select the PQ from the map as opposed to following the map link on the PQ list page? I select the map option on the PQ list page. I don't know how else to see the PQ map. On the map page... the normal map page, switch the left-hand panel from "search" to "pocket queries" and select you query from the list. How about that! I've had that side panel retracted for so long that I forgot it was there. It does work there, although still not on the PQ list. Thanks for the tip. Quote Link to comment
+buti_oxa Posted September 18, 2016 Share Posted September 18, 2016 The problem is still there. It bothers me in this common scenario: I create a new PQ, go to preview, and click Map this Location to see if I got what I wanted. Quote Link to comment
+aghudley Posted September 18, 2016 Share Posted September 18, 2016 (edited) I have the problem also. It is hit or miss if I get the correct PQ map. Connection speed is not an issue as the problem persists on my fast cable connection and on a much slower connection via Verizon. It is getting to be very irritating. The problem started about a week ago. It happens from both the PQ page and from the map page, PQ tab. I'm running Windows 10 on two different PCs, one 64 bit, one 32 bit. Edited September 18, 2016 by aghudley Quote Link to comment
+PnavE_81 Posted September 22, 2016 Share Posted September 22, 2016 same problem here. Tried to do a PQ from a bookmarklist and I get all the correct caches in a list as expected. When I click on the link at the top to see them on the map, I just get a map with all the caches around my home (all caches, not just the ones in the PQ) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.