+33Nibbles33 Posted November 23, 2020 Posted November 23, 2020 Any ideas on how to create a cool geocache container without a hot glue gun ? 1 Quote
Darwin473 Posted November 23, 2020 Posted November 23, 2020 It depends on the tools you currently have available. A simple pill bottle can go from meh to wow with a bit of paint and some stickers. I've seen lock-and-locks which have been added onto the back of a large doll / action figure with a pair of cable ties so it looks like the cache container is the figure's backpack. I heard of an ammo box near a race track that had some jar lids screwed to the sides and painted like a race car. If you want to get fancy, you might be able to make some fun outer containers with some sheet metal if you can afford a hand drill, a pop rivet gun and there is a scrap metal yard or factory near you where you can get free sheet metal. If you can afford a hand saw, a hammer and a box of nails then there are loads of possible things you can make out of discarded pallets. Quote
+The Jester Posted November 23, 2020 Posted November 23, 2020 1. Take container and place in refrigerator. 2. Wait an hour. 3. Open refrigerator and - TA DA! Cool geocache container! Sorry, I couldn't resist. I know, try harder next time... (I get that from the wife a lot) 6 Quote
+barefootjeff Posted November 23, 2020 Posted November 23, 2020 I've come across most of my themed containers in knick-knack shops, repurposing things like garden ornaments and toys as containers. Here's a few examples: Quote
+niraD Posted November 24, 2020 Posted November 24, 2020 5 hours ago, 33Nibbles33 said: Any ideas on how to create a cool geocache container without a hot glue gun ? Epoxy? Rivets and silicone sealant? Cyanoacrylate glue? Have you seen the CCC thread pinned to the top of this section of the forums? Quote
+33Nibbles33 Posted November 25, 2020 Author Posted November 25, 2020 On 11/24/2020 at 2:15 AM, niraD said: Epoxy? Rivets and silicone sealant? Cyanoacrylate glue? Have you seen the CCC thread pinned to the top of this section of the forums? Yes I have but I can’t get the pictures to load on it for some reason Quote
+kunarion Posted November 25, 2020 Posted November 25, 2020 5 hours ago, 33Nibbles33 said: Yes I have but I can’t get the pictures to load on it for some reason Pictures that were hosted off-site are no longer available after the old site stops hosting the pictures. Scroll to newer posts to see some pictures. If they're my posts and you can't see a picture, let me know. I may have another picture. Quote
+sernikk Posted November 25, 2020 Posted November 25, 2020 (edited) On 11/23/2020 at 9:19 PM, 33Nibbles33 said: Any ideas on how to create a cool geocache container without a hot glue gun ? Hot glue gun is not so efficient in my opinion, because it's not temperature resistant. It's much better to use mounting glues. Edited November 25, 2020 by sernikk 1 Quote
+kunarion Posted November 25, 2020 Posted November 25, 2020 (edited) 7 hours ago, sernikk said: Hot glue gun is not so efficient in my opinion. It's not temperature resistant. It is much better to use mounting glues. The only thing I use hot glue for, when making a cache container, is to tack pieces in place for ease of assembly, then I use whatever real adhesive is needed (some sealant requires a couple of weeks to cure). If it melts with heat (such as "hot glue"), I can't use it in my caches here in Georgia. I've tried ordinary craft "hot glue", and it becomes a spongy rubber glob after a while outdoors, no longer stuck to anything. But there are many kinds of "hot glue", so if the question is whether a cheap glue that is on hand will work, and if folks disbelieve others who tried it already, go ahead and try it. I've had some luck with construction adhesive (in addition to mechanical attachment), but it's expensive, and comes in a big tube that you'll need to use up all at once. Most of the time I use some kind of mechanical attachment such as wraps of velcro on a small tube, or bolts on larger containers, along with some kind of epoxy or sealant. You can't "glue" anything to the slick slick plastic of the usual cache containers and expect it to stay in place, unless it's just a decoration. And even then, finders have surprised me at how quickly and easily they break things off a container. Edited November 25, 2020 by kunarion 1 Quote
+bjohio Posted November 29, 2020 Posted November 29, 2020 Keep your eyes open at thrift shops, flea markets, garage sales, craft stores, etc. for objects that could be converted into a container. Gluing a bison tube (with E6000) into an existing object is an easy way to make a creative cache. With a Dremel tool, you can be more creative. 1 Quote
+KokiInglés Posted December 30, 2024 Posted December 30, 2024 You can make one getting a fake spider, cutting a small hole and introducing a bison tube in that hole. The result is incredible! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.