+Atlas Cached Posted December 1, 2017 Share Posted December 1, 2017 (edited) For those who would like to test the latest BETA firmware (3.62) in their Oregon 7x0 GPSr, it is currently available at " GPSrChive.com > Firmware " now!Firmware 3.62: [30NOV17]Added support for CIQ 2.4Improved searching graphic when calculating round trip routesFixed issue connected to WIFI when there are a large number of access pointsFixed possible shutdown on photo viewer pageFixed possible issue with lock on roads setting being overwritten There is a post in the Oregon 7x0 forum there to report any issues or other observations for this BETA firmware. Garmin wants your feedback! Thank you! Edited December 1, 2017 by Atlas Cached 1 Quote Link to comment
+Red90 Posted December 8, 2017 Share Posted December 8, 2017 Out of Beta. Changes made from version 3.60 to 3.70: Added support for CIQ 2.4 Improved searching graphic when calculating round trip routes Fixed issue connecting to WIFI when there are a large number of access points Fixed possible shutdown on photo viewer page Fixed possible issue with lock on roads setting being overwritten 1 Quote Link to comment
wwjd7 Posted December 9, 2017 Share Posted December 9, 2017 I may be jumping on this possible bug too early but when I installed 3.70, the automobile routing wouldn't display its usual "250m turn right at xxxx Street" or "800m turn left at yyyy Avenue". Instead it would display "Continue to xxxx Street" or "Continue to yyyy Avenue". I need it to work properly ASAP and couldn't afford misbehaving behaviour at this present time, and I knew it worked properly with 3.60. After reinstalling 3.60, the automobile routing once again displayed proper turn directions so I'm suspecting the automobile routing is broken in 3.70. Again, I may be jumping on something prematurely, and I could be wrong, so take this as a heads-up just in case 3.70 has broken automobile routing. I'm sorry I can't provide more information than this as I only had 3.70 running for a very short time before reverting back to 3.60 so no print screens or anything. Quote Link to comment
+Red90 Posted December 10, 2017 Share Posted December 10, 2017 The "continue to" is what you see when you are a long way from the turn. It should change to a number when you get closer. It is not a bug. Quote Link to comment
robertlipe Posted December 26, 2017 Share Posted December 26, 2017 It's probably my fault, but the dates in the subject were whack. I think I've fixed them, but I'm highly medicated with a lot on my mind. If they're still wrong, another mod can help or I'll fix it upon my return. For posterity (and search...) the subject was "Oregon 7x0 Firmware 3.62 BETA Available 201701730. Released 201711207." Quote Link to comment
+Atlas Cached Posted December 26, 2017 Author Share Posted December 26, 2017 (edited) 11 hours ago, robertlipe said: It's probably my fault, but the dates in the subject were whack. I think I've fixed them, but I'm highly medicated with a lot on my mind. If they're still wrong, another mod can help or I'll fix it upon my return. For posterity (and search...) the subject was "Oregon 7x0 Firmware 3.62 BETA Available 201701730. Released 201711207." Thank You Robert! I had noticed the subject line was edited, and could not make good sense of it at the time. As a technicality, the 3.62 beta was released 20171130, and the next non-beta version (3.70) was released 20171206. This information is available on the GPSrChive Oregon 7x0 Firmware page. Thank You! Edited December 26, 2017 by Atlas Cached Quote Link to comment
+HHL Posted December 26, 2017 Share Posted December 26, 2017 On 10.12.2017 at 3:28 PM, Red90 said: The "continue to" is what you see when you are a long way from the turn. It should change to a number when you get closer. It is not a bug. I see the "Continue to ..." on a regular base when I have accidentaly two routable maps activated. After disabling all routable maps but one - I'm immediately seeing the distance button. Hans Quote Link to comment
Rock Chalk Posted December 28, 2017 Share Posted December 28, 2017 On 12/9/2017 at 3:52 PM, wwjd7 said: I may be jumping on this possible bug too early but when I installed 3.70, the automobile routing wouldn't display its usual "250m turn right at xxxx Street" or "800m turn left at yyyy Avenue". Instead it would display "Continue to xxxx Street" or "Continue to yyyy Avenue". I need it to work properly ASAP and couldn't afford misbehaving behaviour at this present time, and I knew it worked properly with 3.60. After reinstalling 3.60, the automobile routing once again displayed proper turn directions so I'm suspecting the automobile routing is broken in 3.70. Again, I may be jumping on something prematurely, and I could be wrong, so take this as a heads-up just in case 3.70 has broken automobile routing. I'm sorry I can't provide more information than this as I only had 3.70 running for a very short time before reverting back to 3.60 so no print screens or anything. Glad to know I'm not going crazy! I've had the same problem all week, and didn't realize there had been a firmware update. I've always liked seeing the distance until the next turn displayed in the "Distance to next" box. Now, it's just a 0. Quote Link to comment
wwjd7 Posted December 28, 2017 Share Posted December 28, 2017 19 hours ago, Rock Chalk said: Glad to know I'm not going crazy! I've had the same problem all week, and didn't realize there had been a firmware update. I've always liked seeing the distance until the next turn displayed in the "Distance to next" box. Now, it's just a 0. Ah, good to know I'm not the only one who's noted this routing bug in 3.7. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.