COINTEST: Todies Wild Ride!

[+opalsns]

HHHHHEEEEEEEYYYYYYYYYYYYYYYY, Sread out, Sread out. LOL!!

GO TO BED!!!!!!! oxoxoxoxox

[+GATOULIS]

Oh boy!!! I think I have all answers exept the last 2! and I am sure they had been mentioned in an old cointest!!!! Oh.....

[+Rockin Roddy]

Ok Folks,

You know the rules of play on this thread ....

Answer all questions in one post.

no back to back untill 15 mins

No editing

Safety Slogan

And NO Copying and Pasting of someone elses post!!!!!! I hate That!!

 

1. Who developed the first motorcycle helmet to absorb shock ? I know this one, so I'll withhold the info

 

2. What did he do in 1953 ? Yep, this one too!!

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? Hold the inner layer together

 

4.What's a Rubie ? A red gem?

 

5 What 2 things does every safe helmet have ? A rider inside and a shell outside?

 

6. What was introduced in 1966 ? Wasn't me, I was born in 1965

 

7. Which country sets the best example of Motorcycle Safety ? Switzerland?

 

8. When was the first Facial Helmet introduced ?

 

9. What is the one and only injury I got, while riding a motorcycle ? Broke an ankle

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? No idea here!!

 

GOOD LUCK !!!

[+opalsns]

Roddy,

You silly, silly man!!!!

Careful, someone will copy your answers. LOL!!!!!!!!

 

Hey Rod, Where is that SAFETY SLOGAN??????

Don't make me stop the bus!!!!!!!!!

Edited April 8, 2009 by opalsns

[+GATOULIS]

Well... I can only guess... but I will give a try!

 

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) who (as I understood - but Imay be wrong) actually believe in that: As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet! Well....

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) You broke your ankle? Hey that's not a copy!

 

10) Honda 1985 Nighthawk ???

 

Ride safely!

[+Rockin Roddy]

Roddy,

You silly, silly man!!!!

Careful, someone will copy your answers. LOL!!!!!!!!

 

Hey Rod, Where is that SAFETY SLOGAN??????

Don't make me stop the bus!!!!!!!!!

 

I would ask the same...I copied your post! What, my answers weren't close?? I'll have to go back to checking the info!!

 

No, but really....

 

STOP YAKKING AND START DRIVING!!!!!

[+opalsns]

Roddy,

You silly, silly man!!!!

Careful, someone will copy your answers. LOL!!!!!!!!

 

Hey Rod, Where is that SAFETY SLOGAN??????

Don't make me stop the bus!!!!!!!!!

 

I would ask the same...I copied your post! What, my answers weren't close?? I'll have to go back to checking the info!!

 

No, but really....

 

STOP YAKKING AND START DRIVING!!!!!

 

DON"T MAKE ME STOP THE BUS ! is my safety slogan, LOLOLOL!!!!!!

[+opalsns]

Is Gatoulis the only one playing?????

 

Wake up and Drive right!!!!!!

[+UFgatorgirl]

i want to play...i need to run to the post office first then i'll start loooking up the answers.

 

see you soon.

[+surteb]

1. Professor C.F. “Red” Lombard

 

2. In 1953, Mr. Lombard applied for a patent for his helmet.

 

3. Spread out the energy created by impact.

 

4. rich urban biker

 

5. Snell sticker in it. DOT-approved sticker inside.

 

6. the American National Safety Standard for Motorcycle Helmets

 

7. Canada

 

8. 1867

 

9. A broken finger.

 

10. A '98 Harley Davidson Fat boy

 

Chance takers are accident makers! Drive safely.

[+snowball 58]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Netherlands

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ? Severly burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1973 Honda CB100

 

Watch those Mirrors

[+surteb]

1. Professor C.F. “Red” Lombard

 

2. In 1953, Mr. Lombard applied for a patent for his helmet.

 

3. Spread out the energy created by impact.

 

4. rich urban biker

 

5. Snell sticker in it. DOT-approved sticker inside.

 

6. the American National Safety Standard for Motorcycle Helmets

 

7. Canada

 

8. 1867

 

9. A bruised ego from severe helmet hair.

 

10. A '06 Kawasaki Ninja

 

Chance takers are accident makers! Drive safely.

[Team Red-one]

1. Sir Hugh William Bell Cairns

 

2. He died in 1952, SO NOTHING

 

3. Spread out the energy created by impact

 

4. rich urban biker

 

5. Snell sticker in it. DOT-approved sticker inside

 

6. the American National Safety Standard for Motorcycle Helmets

 

7. Canada

 

8. 1967

 

9 broke your leg

 

10 1994 Harley davidsom Road king

 

8.

[+surteb]

1. Professor C.F. “Red” Lombard

 

2. In 1953, Mr. Lombard applied for a patent for his helmet.

 

3. Spread out the energy created by impact.

 

4. rich urban biker

 

5. Snell sticker in it. DOT-approved sticker inside.

 

6. the American National Safety Standard for Motorcycle Helmets

 

7. Canada

 

8. 1867

 

9. A bruised elbow.

 

10. A '98 Harley Davidson Fat boy

 

Chance takers are accident makers! Drive safely.

[+UFgatorgirl]

1. prof. lombard

2. made first helmet

3. preveny penetration by objects and provide support to the inner foam

4. ? rich urban biker

5. a dot and snell sticker

6. highway safety act --started requiring all states to mandate helmet for motorcycles.

7. austrailia

8. 1968

9. you broke your wrist

10. 1988 honda

 

ride awake not drowsy

[+opalsns]

Well... I can only guess... but I will give a try!

 

1) professor C.F."Red" Lombard .... YES

 

2) He applied for a patent for his helmet .... YES

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact ... YES

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) who (as I understood - but Imay be wrong) actually believe in that: As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet! ... YES

 

5) Snell sticker and Dot approved sticker .....YES

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. .... YES

 

7) Canada .....YES

 

8) 1967 ....YES

 

9) You broke your ankle? Hey that's not a copy! ....NO

 

10) Honda 1985 Nighthawk ??? ..NO

 

Ride safely!

[+opalsns]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Netherlands

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ?Severly burned leg on muffler ...YES

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1973 Honda CB100

 

Watch those Mirrors

[+opalsns]

Hey Roddy, Do you think these were good questions to ask??

 

Stay in your lane!!!!!!!!

[+UFgatorgirl]

1. profes. lombard

2. got a patent

3. spreads out impact

4. rich urban bikers

5. snell and dot sticker

6. highway safety act

7. canada

8. 1967

9. burned leg on muffler

10. 1987 suzuki

 

watch for kids on bikes

[+GATOULIS]

Is there a Winner yet? I just cvame home from my volley trainning!

 

In case there is no winner yet, I will give a try again!

 

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) who (as I understood - but Imay be wrong) actually believe in that: As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet! Well....

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) you burned your leg on the muffler

 

10) Honda CB 100, 1972

 

Ride safely!

[+LadyBee4T]

1. Who developed the first motorcycle helmet to absorb shock ? The first motorcycle helmet was invented by Prof. Charles F. Lombard who developed a unique energy absorbing helmet for the United States Air Force. So, the first motorcycle helmet was not designed as a motorcycle helmet but it was rather designed for aviation. Dr. Lombard patented his unique invention which was applied not only to aviation but also automobile racing, motorcycles, hockey, etc…

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? Along with the layer of comfort padding in a helmet, this helmet also had another outer layer of padding that not only absorbed, but spread out the energy created by impact.

 

4.What's a Rubie ? Rich Urban Biker. A term usually used by real Harley Bikers to describe the weekend wannabe accountant types who buy a Harley ''cause they can and the status of it, but couldn't tell a camshaft from a brake pad. Bikers that ride with more money than knowledge, experience, and ""street saavy"".

 

5 What 2 things does every safe helmet have ? Helmets that meet FMVSS 218 must have a sticker on the outside back of the helmet with the letters DOT, placed there certifying that the helmet meets or exceeds FMVSS 218. In addition to the DOT sticker, a label located inside the helmet showing that a helmet meets the standards of a private organization like Snell is a good indicator that the helmet meets the federal safety standard.

 

6. What was introduced in 1966 ? In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied.

 

7. Which country sets the best example of Motorcycle Safety ? Canada

 

8. When was the first Facial Helmet introduced ? In 1967, the first full facial helmet was introduced, providing improved vision.

 

9. What is the one and only injury I got, while riding a motorcycle ? Burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1974 Honda 350

 

Wear an approved helmet

 

(disclaimer these are my own answers copied and pasted from http://www.thehistoryof.net/the-history-of...le-helmets.html )

[+opalsns]

Still No Winner!!!!

[+LadyBee4T]

Well I guess its more than 15 minutes so I an guess again....

 

1. Who developed the first motorcycle helmet to absorb shock ? The first motorcycle helmet was invented by Prof. Charles F. Lombard who developed a unique energy absorbing helmet for the United States Air Force. So, the first motorcycle helmet was not designed as a motorcycle helmet but it was rather designed for aviation. Dr. Lombard patented his unique invention which was applied not only to aviation but also automobile racing, motorcycles, hockey, etc…

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? Along with the layer of comfort padding in a helmet, this helmet also had another outer layer of padding that not only absorbed, but spread out the energy created by impact.

 

4.What's a Rubie ? Rich Urban Biker. A term usually used by real Harley Bikers to describe the weekend wannabe accountant types who buy a Harley ''cause they can and the status of it, but couldn't tell a camshaft from a brake pad. Bikers that ride with more money than knowledge, experience, and ""street saavy"".

 

5 What 2 things does every safe helmet have ? Helmets that meet FMVSS 218 must have a sticker on the outside back of the helmet with the letters DOT, placed there certifying that the helmet meets or exceeds FMVSS 218. In addition to the DOT sticker, a label located inside the helmet showing that a helmet meets the standards of a private organization like Snell is a good indicator that the helmet meets the federal safety standard.

 

6. What was introduced in 1966 ? In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied.

 

7. Which country sets the best example of Motorcycle Safety ? Canada

 

8. When was the first Facial Helmet introduced ? In 1967, the first full facial helmet was introduced, providing improved vision.

 

9. What is the one and only injury I got, while riding a motorcycle ? Burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1975 Honda CB400

 

Wear an approved helmet that fits well!!!

[+GATOULIS]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) who (as I understood - but Imay be wrong) actually believe in that: As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet! Well....

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) you burned your leg on the muffler

 

10) Honda CB 100, 1971

 

Ride safely!

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers)

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1972 Kawasaki 750

 

Helmets save lives, Wear one!!

[+LadyBee4T]

Well I guess its more than 15 minutes so I an guess again....

 

1. Who developed the first motorcycle helmet to absorb shock ? The first motorcycle helmet was invented by Prof. Charles F. Lombard who developed a unique energy absorbing helmet for the United States Air Force. So, the first motorcycle helmet was not designed as a motorcycle helmet but it was rather designed for aviation. Dr. Lombard patented his unique invention which was applied not only to aviation but also automobile racing, motorcycles, hockey, etc…

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? Along with the layer of comfort padding in a helmet, this helmet also had another outer layer of padding that not only absorbed, but spread out the energy created by impact.

 

4.What's a Rubie ? Rich Urban Biker. A term usually used by real Harley Bikers to describe the weekend wannabe accountant types who buy a Harley ''cause they can and the status of it, but couldn't tell a camshaft from a brake pad. Bikers that ride with more money than knowledge, experience, and ""street saavy"".

 

5 What 2 things does every safe helmet have ? Helmets that meet FMVSS 218 must have a sticker on the outside back of the helmet with the letters DOT, placed there certifying that the helmet meets or exceeds FMVSS 218. In addition to the DOT sticker, a label located inside the helmet showing that a helmet meets the standards of a private organization like Snell is a good indicator that the helmet meets the federal safety standard.

 

6. What was introduced in 1966 ? In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied.

 

7. Which country sets the best example of Motorcycle Safety ? Canada

 

8. When was the first Facial Helmet introduced ? In 1967, the first full facial helmet was introduced, providing improved vision.

 

9. What is the one and only injury I got, while riding a motorcycle ? Burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1974 Honda CB750

 

Wear an approved helmet that fits well!!!

[+opalsns]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers)

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1972 Kawasaki 750

 

Helmets save lives, Wear one!!

 

1-9 correct # 10 very close CeDo !!!!!

[+snowball 58]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Netherlands

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ? Severly burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? Honda Mini bike 50 1970

 

No matter How uncool it is WEAR YOUR HELMET

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers)

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1974 Kawasaki 750

 

Helmets save lives, Wear one!!

[+snowball 58]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Netherlands

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ? Severly burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? Kawasaki 650 1977

 

WEAR IT OR ELSE YOUR HELMET OF CORSE

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) Bikers that ride with more money than knowledge

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1972 Harley Davivson Electra-Glide

 

Helmets save lives, Wear one!!

[+LadyBee4T]

1. Who developed the first motorcycle helmet to absorb shock ? The first motorcycle helmet was invented by Prof. Charles F. Lombard who developed a unique energy absorbing helmet for the United States Air Force. So, the first motorcycle helmet was not designed as a motorcycle helmet but it was rather designed for aviation. Dr. Lombard patented his unique invention which was applied not only to aviation but also automobile racing, motorcycles, hockey, etc…

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? Along with the layer of comfort padding in a helmet, this helmet also had another outer layer of padding that not only absorbed, but spread out the energy created by impact.

 

4.What's a Rubie ? Rich Urban Biker. A term usually used by real Harley Bikers to describe the weekend wannabe accountant types who buy a Harley ''cause they can and the status of it, but couldn't tell a camshaft from a brake pad. Bikers that ride with more money than knowledge, experience, and ""street saavy"".

 

5 What 2 things does every safe helmet have ? Helmets that meet FMVSS 218 must have a sticker on the outside back of the helmet with the letters DOT, placed there certifying that the helmet meets or exceeds FMVSS 218. In addition to the DOT sticker, a label located inside the helmet showing that a helmet meets the standards of a private organization like Snell is a good indicator that the helmet meets the federal safety standard.

 

6. What was introduced in 1966 ? In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied.

 

7. Which country sets the best example of Motorcycle Safety ? Canada

 

8. When was the first Facial Helmet introduced ? In 1967, the first full facial helmet was introduced, providing improved vision.

 

9. What is the one and only injury I got, while riding a motorcycle ? Burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1974 kawasaki 750

 

Wear an approved helmet that fits well!!!

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) Bikers that ride with more money than knowledge

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1974 Harley Davivson Sportster

 

Helmets save lives, Wear one!!

[+GATOULIS]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) who (as I understood - but Imay be wrong) actually believe in that: As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet! Well....

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) you burned your leg on the muffler

 

10) Kawasaki 750, 1976

 

Ride safely!

[+snowball 58]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Netherlands

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ? Severly burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? Kawasaki 650 1976

 

 

 

Don’t be a fool Be cool Wear your Helmet

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) Bikers that ride with more money than knowledge

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 197 Kawasaki KZ400

 

Helmets save lives, Wear one!!

[+GATOULIS]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) who (as I understood - but Imay be wrong) actually believe in that: As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet! Well....

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) you burned your leg on the muffler

 

10) Honda 750 Shadow 1981

 

Ride safely!

[+Team CeDo]

1977*

[+LadyBee4T]

1. Who developed the first motorcycle helmet to absorb shock ? The first motorcycle helmet was invented by Prof. Charles F. Lombard who developed a unique energy absorbing helmet for the United States Air Force. So, the first motorcycle helmet was not designed as a motorcycle helmet but it was rather designed for aviation. Dr. Lombard patented his unique invention which was applied not only to aviation but also automobile racing, motorcycles, hockey, etc…

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? Along with the layer of comfort padding in a helmet, this helmet also had another outer layer of padding that not only absorbed, but spread out the energy created by impact.

 

4.What's a Rubie ? Rich Urban Biker. A term usually used by real Harley Bikers to describe the weekend wannabe accountant types who buy a Harley ''cause they can and the status of it, but couldn't tell a camshaft from a brake pad. Bikers that ride with more money than knowledge, experience, and ""street saavy"".

 

5 What 2 things does every safe helmet have ? Helmets that meet FMVSS 218 must have a sticker on the outside back of the helmet with the letters DOT, placed there certifying that the helmet meets or exceeds FMVSS 218. In addition to the DOT sticker, a label located inside the helmet showing that a helmet meets the standards of a private organization like Snell is a good indicator that the helmet meets the federal safety standard.

 

6. What was introduced in 1966 ? In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied.

 

7. Which country sets the best example of Motorcycle Safety ? Canada

 

8. When was the first Facial Helmet introduced ? In 1967, the first full facial helmet was introduced, providing improved vision.

 

9. What is the one and only injury I got, while riding a motorcycle ? Burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1973 kawasaki 350

 

Wear an approved helmet that fits well!!!

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) Bikers that ride with more money than knowledge

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1979 Harley Davivson Electra-Glide

 

Helmets save lives, Wear one!!

[+opalsns]

Someone had the Make, another had the year, and no one had the model

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) Bikers that ride with more money than knowledge

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1973 Harley Davivson super-Glide

 

Helmets save lives, Wear one!!

[+snowball 58]

TB2X3B7 Yet another coin to let loose on the world

 

 

snowball 58

 

 

 

Wear your Helmet

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) Bikers that ride with more money than knowledge

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1975 honda cb450

 

Helmets save lives, Wear one!!

[+snowball 58]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Netherlands

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ? Severly burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? Yamaha 70 1974

 

 

 

Don’t be a fool Be cool Wear your Helmet

[+LadyBee4T]

1. Who developed the first motorcycle helmet to absorb shock ? The first motorcycle helmet was invented by Prof. Charles F. Lombard who developed a unique energy absorbing helmet for the United States Air Force. So, the first motorcycle helmet was not designed as a motorcycle helmet but it was rather designed for aviation. Dr. Lombard patented his unique invention which was applied not only to aviation but also automobile racing, motorcycles, hockey, etc…

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? Along with the layer of comfort padding in a helmet, this helmet also had another outer layer of padding that not only absorbed, but spread out the energy created by impact.

 

4.What's a Rubie ? Rich Urban Biker. A term usually used by real Harley Bikers to describe the weekend wannabe accountant types who buy a Harley ''cause they can and the status of it, but couldn't tell a camshaft from a brake pad. Bikers that ride with more money than knowledge, experience, and ""street saavy"".

 

5 What 2 things does every safe helmet have ? Helmets that meet FMVSS 218 must have a sticker on the outside back of the helmet with the letters DOT, placed there certifying that the helmet meets or exceeds FMVSS 218. In addition to the DOT sticker, a label located inside the helmet showing that a helmet meets the standards of a private organization like Snell is a good indicator that the helmet meets the federal safety standard.

 

6. What was introduced in 1966 ? In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied.

 

7. Which country sets the best example of Motorcycle Safety ? Canada

 

8. When was the first Facial Helmet introduced ? In 1967, the first full facial helmet was introduced, providing improved vision.

 

9. What is the one and only injury I got, while riding a motorcycle ? Burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? 1973 Honda cb500

 

Wear an approved helmet that fits well!!!

[+snowball 58]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Netherlands

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ? Severly burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? Yamaha 750 1974

 

 

 

Don’t be a fool Be cool Wear your Helmet

[+opalsns]

And someone has the cubes!!!!!!!

 

Drive Safe

[+snowball 58]

1. Who developed the first motorcycle helmet to absorb shock ? Professor C.F. “Red” Lombard

 

2. What did he do in 1953 ? In 1953, Mr. Lombard applied for a patent for his helmet.

 

3.The inner layer of padding absorbed shock. What did the outer layer do ? it has to do with the shell spreading the load so that the liner can absorb the energy.

 

4.What's a Rubie ? Another sector of motorcyclists is increasing in number – what’s known as “Rubies” (rich urban bikers). This category of riders also has an increasing number of motorcycle fatalities. As people get older, they feel a stronger need for freedom, which includes the freedom to ride their motorcycles without a helmet. Again, the results speak for themselves – no helmets, more deaths.

 

5 What 2 things does every safe helmet have ? Snell and DOT STicker

 

6. What was introduced in 1966 ? Then the safety agencies really got into the act. In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet. The following year, the U.S. federal government introduced the Highway Safety Act of 1966 that required states to have mandatory helmet laws if they wanted to receive federal funds for highway maintenance and construction. This plan had its desired effect – by 1975, 47 states had complied

 

7. Which country sets the best example of Motorcycle Safety ? Canada

 

8. When was the first Facial Helmet introduced ? 1967

 

9. What is the one and only injury I got, while riding a motorcycle ? Severly burned leg on muffler

 

10. What was KD1EJ's first motorcycle ? Year, Make and model? Kawasaki 250 1974

 

 

 

Don’t be a fool Be cool Wear your Helmet

[+Team CeDo]

1) professor C.F."Red" Lombard

 

2) He applied for a patent for his helmet

 

3) The outer layer of padding not only absorbed, but it spreads out the energy created by impact

 

4) Rubies: A sector of motorcyclists (Rich Urban bikers) Bikers that ride with more money than knowledge

 

5) Snell sticker and Dot approved sticker

 

6) In 1966, the American National Safety Standard for Motorcycle Helmets was introduced, requiring performance standards for helmets that manufacturers were obligated to meet.

 

7) Canada

 

8) 1967

 

9) burned your leg on the muffler..OUCH

 

10) 1975 Yamaha xs500

 

Helmets save lives, Wear one!!