+Pod-Cache Posted March 19, 2008 Share Posted March 19, 2008 I am finally getting ready to plan my first hide. There is a local park that recently had a cache archived so it is vacant and is a really great park for caching. I want to plan it as a multi and do it right. I've got just over a hundred hides under my belt, I know what I like, don't like, etc. Question: Is it possible or is there a way to "reserve" this location so somebody doesn't swoop in and toss a film cannister in a guard rail 300' away and call that a cache? Quote Link to comment
+Dragonfire870 Posted March 19, 2008 Share Posted March 19, 2008 No, you need to place it right away or don't and hope that no one gets the spot. But if you do a multi cache, I believe only the first waypoint is counted with the 0.1 mile rule. So you could have the final stage of a multi-cache 100' away from a micro and it would be fine. Quote Link to comment
+mtn-man Posted March 19, 2008 Share Posted March 19, 2008 Somewhat, yes. Enter the cache page. Put as much data as you can on the cache page. Enter a detailed reviewer note on the bottom of the submission page telling the reviewer what you are trying to accomplish. Click the submission button. Enter the waypoints you have so far for the stages as additional waypoints after you have submitted the cache so the reviewer knows right where they are and so they are in the system. Once the cache is submitted for review, you will see a link at the top right that says "waypoints". The reviewer will know you are working on the cache at that point and may disable the page. We can still see the cache if another new one is listed. You cannot stall and take weeks to complete the process though. Once you get started, keep the process moving toward getting it published. Quote Link to comment
+mtn-man Posted March 19, 2008 Share Posted March 19, 2008 But if you do a multi cache, I believe only the first waypoint is counted with the 0.1 mile rule. So you could have the final stage of a multi-cache 100' away from a micro and it would be fine. Sorry, but no. The guidelines are your friend. http://www.geocaching.com/about/guidelines.aspx#sat The cache saturation guideline applies to all physical stages of multicaches and mystery/puzzle caches, as well as any other stages entered as “stages of a multicache.” The guideline does NOT apply to event caches, earthcaches, grandfathered virtual and webcam caches, stages of multicaches or puzzle caches entered as “question to answer” or “reference point,” or to any “bogus” posted coordinates for a puzzle cache. Within a single multicache or mystery/puzzle cache, there is no minimum required distance between waypoints. Quote Link to comment
+StarBrand Posted March 19, 2008 Share Posted March 19, 2008 ...what the puppy just barked. Quote Link to comment
+Cav Scout Posted March 19, 2008 Share Posted March 19, 2008 Miss Jenn at Groundspeak says there is no such thing as reserving a place for a cache. Do your work ASAP! Quote Link to comment
+Zolgar Posted March 19, 2008 Share Posted March 19, 2008 Or.. .. If it's going to take you a while. Place a film canister micro there, and then just archive it when you're ready to do the actual hide >.> .... What? It'd work. it'd be cheesy, but it'd work. Quote Link to comment
+El Diablo Posted March 19, 2008 Share Posted March 19, 2008 Next thing you know cache locations would be up for sale on Ebay. Hey...hey...that's nat a bad idea! El Diablo Quote Link to comment
+PhxChem Posted March 19, 2008 Share Posted March 19, 2008 Put as much data as you can on the cache page. Enter a detailed reviewer note on the bottom of the submission page telling the reviewer what you are trying to accomplish. Click the submission button. Enter the waypoints you have so far for the stages as additional waypoints after you have submitted the cache so the reviewer knows right where they are and so they are in the system. Once the cache is submitted for review, you will see a link at the top right that says "waypoints". The reviewer will know you are working on the cache at that point and may disable the page. We can still see the cache if another new one is listed. HHHMMMMMMMM..... Sounds a little sketchy to me. Like submitting a non-existent cache, getting it approved, then disabling it.....until you get your act together. Quote Link to comment
+JohnnyVegas Posted March 19, 2008 Share Posted March 19, 2008 (edited) Or.. .. If it's going to take you a while. Place a film canister micro there, and then just archive it when you're ready to do the actual hide >.> .... What? It'd work. it'd be cheesy, but it'd work. As long as the micro is there for at least 90 days before you archive it, per the guidelines below Cache Permanence When you report a cache on the Geocaching.com web site, geocachers should (and will) expect the cache to be there for a realistic and extended period of time. Therefore, caches that have the goal to move (“traveling caches”), or temporary caches (caches hidden for less than 3 months or for events) most likely will not be published. If you wish to hide caches for an event, bring printouts to the event and hand them out there. We realize that it is possible that a planned long-term cache occasionally becomes finite because of concerns with the environment, missing or plundered caches, or the owner’s decision to remove the cache for other valid reasons. Please do your best to research fully, hide wisely, and maintain properly for a long cache life. Edited March 19, 2008 by JohnnyVegas Quote Link to comment
+PhxChem Posted March 19, 2008 Share Posted March 19, 2008 As long as the micro is there for at least 90 days before you archive it, per the guidelines below Let's see, "it got muggled after two days. Going to archive and change container and move to a location nearby" Of course, no one would KNOWINGLY break the rules..... Quote Link to comment
CoyoteRed Posted March 19, 2008 Share Posted March 19, 2008 Of course, no one would KNOWINGLY break the rules..... Break? Of. Course. Not. "Massage" them a little to fit in one's nefarious scheme? Maybe. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.