+srt4guy Posted February 18, 2006 Share Posted February 18, 2006 put the gsak on my new pooter today i had it on my last and know how to upload, how ever this time when i click "send waypoints" it says loading then after about 6 sec. it dumps out and says it did not have enough time. garmin etrex, yes i changed it in set up to garmin but still no go. any idea what gives? Tim Quote Link to comment
+WeightMan Posted February 18, 2006 Share Posted February 18, 2006 You might get a quicker response on the GSAK boards. Quote Link to comment
+Miragee Posted February 18, 2006 Share Posted February 18, 2006 Do you have the Mapsource maps? Can you Export from GSAK to Mapsource and then send the waypoints from Mapsource to the GPSr? You could also try asking the question over in the GSAK Forum. Quote Link to comment
+Team Cotati Posted February 19, 2006 Share Posted February 19, 2006 Chances are that you need to select a different serial port in the GSAK application. Assuming of course that your GPSr is connected to your computer via a serial port cable. Quote Link to comment
+srt4guy Posted February 19, 2006 Author Share Posted February 19, 2006 yes it is connected, it says time out error. Tim Quote Link to comment
+PDOP's Posted February 19, 2006 Share Posted February 19, 2006 Try another program to see whether it's your hardware or GSAK that's giving you problems. GPSTrackmaker is freeware or EasyGPS. Also could you clarify what connection you're using (USB or serial) and if you have a USB to serial converter. Another thing might be something on your new computer that's grabbing the com port (hotsync program) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.