+tnfishdaddy Posted January 3, 2005 Share Posted January 3, 2005 I have downloaded and installed both. I have selected 300 waypoints and set them up in GSAK and my gps. I then tried to export these from GSAK to my palm using Cachemate. After synching, it said that 1 file transfered. It is the last one in my list of 300. Why didn't all 300 transfer? How do I do this? Also, why didn't hints and logs and descriptions transfer? Help, I desperately want to go paperless and this is all starting to discourage me. Quote Link to comment
+Learned Gerbil Posted January 3, 2005 Share Posted January 3, 2005 You don't say what you started with - was it a GPX file sent as a pocket query using premium membership of GC.com. If not, what did you use to put the descriptions into GSAK? Quote Link to comment
+Timpat Posted January 3, 2005 Share Posted January 3, 2005 (edited) A pretty basic question here. Did you register paying the $8? If you are using the freebie version you can only transfer 10 waypoints with their data. Edit: I just thought of something else. When you look at your Palm and it says "1 file transfered", you then have the option to file it as either "found", "not-found", "un-filed", and maybe some others. It will look like only 1 file until you choose an option. Then look under the category you filed it to, should be "not found" normally, and I wonder if you see them all? Good luck! Don't give up, paperless is terrific. I use Cachemate and GSAK with my Palm IIIxe. Edited January 3, 2005 by Timpat Quote Link to comment
+tnfishdaddy Posted January 4, 2005 Author Share Posted January 4, 2005 I did all this and it said 1 file so I called it not found and still only had one file. The last one on my list. I need help. Any other ideas? Quote Link to comment
+embra Posted January 4, 2005 Share Posted January 4, 2005 (edited) There's a bit of a chicken-egg thing here: you are feeling frustrated because of the confusion, but it's hard to tell you what to do unless you can understand what's going on well enough to describe with specific language where you're getting hung-up (no criticism, we've all been there). I don't use Cachemate, so take my questions/suggestions with more than a grain of salt. But I am a bit puzzled by your stating that only one file synched. It sounds like you are using the word "file" to describe what we call a "waypoint." It sounds like you got all 300 waypoints to make it from GSAK to GPS. When I do a cachemate export, GSAK tells me that it converted 300 (or whatever) waypoints. Are you getting that confirmation? You should end up with one file containing 300 waypoints. What program is telling you that one file synched? If that is HotSync, then it would sound like things are working right. At this point I'm not sure that you did everything right, and may just be looking at the last waypoint on your Palm (my Cachemate ignorance comes into play here). Hang in there...lots of people here are happy to get you through the learning curve. Unfortunately--as you are experiencing--there are multiple places where the train can get off track. Once you get it worked out, I can promise that it will be relatively effortless. Edited January 4, 2005 by embra Quote Link to comment
+tnfishdaddy Posted January 4, 2005 Author Share Posted January 4, 2005 I received a pocket query with 300 waypoints in my email. I dragged and dropped this file into GSAK. Everything looks great here. If you look at my screen in GSAK, all 300 are listed there. I don't know if it is one big file with 300 waypoints in it or 300 different files. With all 300 listed, I went to export and and clicked Cashemate. I got a screen entitled Export Cachemate PDB File. It already had a name in the box for file to create. It also already had a name in the box that says Select From Most Recent. I left everything the same except the box for Limit number of logs to export. I changed it to 10 since I am still using the free version of cachemate. I then clicked generate at the bottom and got a box that said this file already exists. Do I want to replace? I click yes. It generates the file and gives me a box that says CmConvert: 1 waypoint coverted finish okay. I clicked oakay. I then hotsynched and when I open cachemate on my palm, I get a box that says at the top, Select Import Category. Below that it says File/Database. Below that the word Home. Below that Database/Default. Below that Category/ Unfiled. I renamed that Not found. Below that All new records from the named file will be created under the selected category. I click okay. Then it reads Import data was successfully merged with the main cachemate database. I click okay. The only waypoint that is listed is the last one in my list of 300 on GSAK. What am I doing wrong? Quote Link to comment
+ZackJones Posted January 4, 2005 Share Posted January 4, 2005 tnfishdaddy: It sounds like you're doing everything properly. One point of clarification regarding cache logs where you set yours to 10. That does not limit the number of caches exported by GSAK. That limits the number of logs that are exported from GSAK. In GSAK you are seeing all 300 of the caches, right? There's no chance that you filtered things so that only one cache is shown? I'm trying to duplicate the problem and so far I can't Quote Link to comment
+tnfishdaddy Posted January 4, 2005 Author Share Posted January 4, 2005 I don't even know how to make a filter yet. I don't think I have done this. Quote Link to comment
+embra Posted January 4, 2005 Share Posted January 4, 2005 I left everything the same except the box for Limit number of logs to export. I changed it to 10 since I am still using the free version of cachemate. I then clicked generate at the bottom and got a box that said this file already exists. Do I want to replace? I click yes. It generates the file and gives me a box that says CmConvert: 1 waypoint coverted finish okay. That narrows things down...it sounds like you are only getting GSAK to generate a file with the single waypoint, and Cachemate doesn't appear to be the culprit (although as mentioned above, until you register Cachemate will only show you 10 waypoints of your file). This does have me scratching my head, as I can't see how you would be generating a single waypoint pdb file without using a filter. Can you try this as an experiment? Try exporting to HTML instead of Cachemate. In the HTML export dialog window, make sure you have the box checked to "Show HTML index when finished" (this should be checked by default.) After you generate the export, your browser window should go to the index page; you can click on any of the indecies you have ordered up to see how many waypoints made it out. This should offer an easy verification if it's a GSAK setting we need to change. Quote Link to comment
+tnfishdaddy Posted January 4, 2005 Author Share Posted January 4, 2005 I did what you said and they all transferred. I exported a gpx file to the guy that runs cachemate and he said he got everything. I emailed all this to Clyde at GSAK and haven't heard anything back yet. It has to be something with GSAK I am doing wrong but I don't know what. Any ideas of what to do? Quote Link to comment
+Sputnik 57 Posted January 4, 2005 Share Posted January 4, 2005 Clyde lives in Australia, and it may be in the middle of the night over there. He is very helpful and responds quickly. Hang in there! Quote Link to comment
+Semper Questio Posted January 4, 2005 Share Posted January 4, 2005 Hi. I use GSAK and Cachemate and I just spent some time playing with mine. I have never had any trouble at all and I can't for the life of me see how this could be happening unless you accidentally set some kind of filter just before doing the Cachemate export. The previous poster was correct in that there is nowhere on the export screen to say how many waypoints to export. The export sends all waypoints currently listed in your active filter (if any). I'm sure ClydE will help you out. Hang in there! Quote Link to comment
+tnfishdaddy Posted January 4, 2005 Author Share Posted January 4, 2005 How can I clear all filters if I have accidently set one. Like I said, I don't know how to set filters yet but I might have by accident. Quote Link to comment
+Tzoid Posted January 4, 2005 Share Posted January 4, 2005 hit the red cross on the toolbar, its icon number 3 from the left ( at least it is on my pc, cant remember if I changed that or not) Quote Link to comment
+embra Posted January 5, 2005 Share Posted January 5, 2005 I don't think it's a filter thing...you were able to send all 300 waypoints to your GPS, and if you had a filter in effect, you wouldn't see them on your PC display in GSAK. I watch this one with interest (don't you just hate being the Unusual Case?) Tzoid's description should get you to the right button on the toolbar, but if that's not clear you can also go to Search/Cancel Filter on the menu. Quote Link to comment
+ClydeE Posted January 5, 2005 Share Posted January 5, 2005 (edited) I did what you said and they all transferred. I exported a gpx file to the guy that runs cachemate and he said he got everything. I emailed all this to Clyde at GSAK and haven't heard anything back yet. It has to be something with GSAK I am doing wrong but I don't know what. Any ideas of what to do? Just an update so others can see I am not ignoring this one. I have already had email conversations with tnfishdaddy on this (so am a little disappointed to see him say he hasn't heard from me - but I guess this could be a timing thing). I have asked for a screen shot of the cachemate export. He said he didn't know how to do this, so I emailed instuctions. I am still waiting for the screen shot so I can try and sort this one out Edited January 5, 2005 by ClydeE Quote Link to comment
+tnfishdaddy Posted January 5, 2005 Author Share Posted January 5, 2005 No disrespect Clyde. Must be a timing thing. I am in such a hurry to figure this out. I had emailed you but didn't realize that you were in Australia. Sorry. You have definety gone above and beyond the call of duty helping me. I have never had this kind of help before. Sorry. Quote Link to comment
+ClydeE Posted January 5, 2005 Share Posted January 5, 2005 Ok, problem solved by email but I will repeat just in case this pops up again and we are all scratching our heads wondering why. Reply via email: __________________________________________ Ok, the problem is that you have nothing int the box that says "you can build the waypoint name using tags" Some how you must have wiped that out, because the default is %code (as per the screen shot when you click on help) You could also use %smart here or a combination of any of the special tags see "special tags" in the help file or online here http://www.gsak.net/help/hs10300.htm However, as you are just getting started I would use %code as this is what most users have (hence this is the default) You can change this later if you find you need to try some of the other special tags Regards Clyde Quote Link to comment
+Sputnik 57 Posted January 5, 2005 Share Posted January 5, 2005 Clyde lives in Australia, and it may be in the middle of the night over there. He is very helpful and responds quickly. Hang in there! I hate to say "I told you so," but ClydeE is truly phenominal in his support and personal attention. None better anywhere. I never cease to be amazed. The guy must never sleep! Quote Link to comment
+tnfishdaddy Posted January 5, 2005 Author Share Posted January 5, 2005 Clyde is the man. Thank you so much for all your help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.