+TexasGringo Posted July 10, 2008 Posted July 10, 2008 Will Where-I-Go work with the new OREGON (3rd Qtr 2008) https://buy.garmin.com/shop/shop.do?cID=145 Quote
+DeRock & The Psychic Cacher Posted July 10, 2008 Posted July 10, 2008 (edited) Will Where-I-Go work with the new OREGON (3rd Qtr 2008) https://buy.garmin.com/shop/shop.do?cID=145 Says so right on the web page for all the units: Create and play location-based adventures with your Oregon and Wherigo. Deane AKA: DeRock & the Psychic Cacher - Grattan MI Edited July 10, 2008 by DeRock & The Psychic Cacher Quote
+TexasGringo Posted July 10, 2008 Author Posted July 10, 2008 ***Create and play location-based adventures with your Oregon and Wherigo.*** Thanks... If I Only Learned To Read Instead Of Just Looking At Pictures. Quote
+CryoGenID Posted July 15, 2008 Posted July 15, 2008 But the question is: As Colorado isn't capable of playing the sounds of Wherigo-Cartridges... will Oregon do that? Because for me, switching from my 60CSx to a new device would only make sense if I could _really_ use Wherigo (and not some crippled version) ;-) Best regards, Chris Quote
+Tequila Posted July 15, 2008 Posted July 15, 2008 But the question is: As Colorado isn't capable of playing the sounds of Wherigo-Cartridges... will Oregon do that? Because for me, switching from my 60CSx to a new device would only make sense if I could _really_ use Wherigo (and not some crippled version) ;-) Best regards, Chris On Garmin's website the comparison shows that the Oregon is identical in functionality to the CO with the exception of touchscreen. So it would be a logical expectation that sounds are the same as the CO. I am not sure a lack of sound with Wherigo's is that big of a deal but that is a personal preference. If the lack of sound was the only drawback of a CO (and probably the OR), I would be a lot happier. The CO has bigger issues than sound. After my experience with the CO, I will not be in a hurry to early adopt any new Garmin product. Quote
+JustMakingTrax Posted July 28, 2008 Posted July 28, 2008 Guys remember both the Colorado and the Oregon are water-proof units. That is probably what is hampering the addition of speakers. Anything more than the standard internal beeps and clicks like voice etc. might sound muffled. Cheers, Ryan Quote
+g-o-cashers Posted July 29, 2008 Posted July 29, 2008 I have both the OR and CO. Wherigo is supported on both and is identical. There is no proper speaker on either just beeps and tones. GO$Rs Quote
+Isonzo Karst Posted August 24, 2008 Posted August 24, 2008 Cachers with an Oregon attempted my Wherigo GC1C125, cart Quercus (in Florida). The unit kept powering off when they clicked the "okay" button to exit the first screen. No sound (a known issue with Garmin) no task, (another possible issue) - just click okay to exit the screen and see the next one. Quote
+binzi Posted September 8, 2008 Posted September 8, 2008 The Wherigo Player Versions are currently not identical on the Colorado and the Oregon. There is at least one Wherigo Cartridge (see GC1EMF3) which can be played on the Colorado (current Software version) but doesn't work properly on the Oregon (Software 2.4). Quote
+GeoMojoGirl Posted September 22, 2008 Posted September 22, 2008 I attempted to play GC1BFQE twice using an Oregon 400T. BriarBoy and I have the same unit and experienced the exact same problem on both. The first time the unit turned off during the first part of the game. We powered the units back on and everything seemed to be working correctly. Then at about the half way point the unit wouldn't accept an answer to a question. At that point we decided to try again another day. On the second attempt we didn’t experience the power off problem but had the same issue with answering the same question as on the previous attempt. We entered the answer but the unit never gave us the next step. It kept returning us to the point where we had to answer the question. We verified that the answer we entered was correct so I'm not sure what the issue is. I'm planning on writing Garmon tech support and see if I get a response. Any information we get back we will post to the forum. If anyone has any advice please let us know. Thanks GeoMojoGirl Quote
+BriarBoy Posted September 24, 2008 Posted September 24, 2008 I attempted to play GC1BFQE twice using an Oregon 400T. BriarBoy and I have the same unit and experienced the exact same problem on both. The first time the unit turned off during the first part of the game. We powered the units back on and everything seemed to be working correctly. Then at about the half way point the unit wouldn't accept an answer to a question. At that point we decided to try again another day. On the second attempt we didn’t experience the power off problem but had the same issue with answering the same question as on the previous attempt. We entered the answer but the unit never gave us the next step. It kept returning us to the point where we had to answer the question. We verified that the answer we entered was correct so I'm not sure what the issue is. I'm planning on writing Garmon tech support and see if I get a response. Any information we get back we will post to the forum. If anyone has any advice please let us know. Thanks GeoMojoGirl To follow up on GeoMojoGirl's note (we both had the same problems that day), the specifics were: Garmin Oregon 400t The Wherigo info button gave the following: Garmin Player v2.50 Wherigo Engine v2.11 At the time, these were the latest versions (and as of today still are). The frustrating thing is that the owner told us that the Wherigo we were trying had been tested with the Pocket PC version and a Garmin Colorado. BriarBoy Quote
+binzi Posted September 27, 2008 Posted September 27, 2008 Based on my own experience I can add the following information: 1.) The Garmin Player Version on the Oregon seems to have no meaning at all. With every software update it is simply set to the number of the software version (which is currently 2.5). Doesn't seem to affect the Wherigo Player on the Oregon at all. 2.) While the Wherigo Engine version (currently 2.11) is the same on the Oregon and the Colorado both devices actually seem to have different engines running. There is at least one cache I know of (GC1EMF3) which can be played using the Colorado but cannot be played using the Oregon. I already wrote a not-so-friendly email to Garmin support as I really hate to travel a long distance to play a Wherigo cartridge only to find that my Oregon Wherigo Player does not support it. Didn't receive an answer until now though... The latest PDA Player is from 5/29/2008. Garmin should have updated the Oregon Player by now! Especially since they advertise Wherigo as one of _the_ features of the Oregon... Quote
vvelisek Posted October 6, 2008 Posted October 6, 2008 (edited) Wherigo Tutorial passed OK on my Garmin Oregon 300, but another two Wherigo games (GC19Z28 and GC1AT9C) caused to freeze up my device at the end of a game Also, after reloading saved game, I couldn't see Tasks in Task menu. I'd been waiting for couple minutes, but without reaction. Then I tried twice shortly press a switch to invoke/shut a "bulb screen" and Tasks appeared. I have Garmin Player version 2.50. My colleague with version 2.20 have NONE of mentioned problems! Game GC19Z28 passed without any problems on his GO 300. Any idea? Thanx Edited October 6, 2008 by vvelisek Quote
+wild-wildbill Posted October 29, 2008 Posted October 29, 2008 I'll add my bit. My geocache Wherigo cartridge for central park is very stable on the colorado and the pocketpc but crashes on the Oregon. One couple had their backup Colorado so they were able to do it and the other guy thinks my code has bugs! This problem is not very good for the future of the Wherigo concept. I've got 6 cartridges out there and I'm not going to buy a model of every player that comes out to test them. Quote
+trowel32 Posted December 30, 2008 Posted December 30, 2008 I would buy the Colorado. I haven't been able to get a single cartridge to work on my new Oregon - they all crash. Quote
+geodarts Posted February 18, 2009 Posted February 18, 2009 There are all too many cartridges that crash on both the Oregon and Colorado. One of the main impetus in buying these units was the promise that they would work with Wherigo caches. I know the Colorado will not play many of the local cartridges -- it seems to have something to do with functions. And I have heard Oregon users complain about similar issues. When will Groundspeak and garmin fix this???? Quote
+Ponyhof Posted February 24, 2009 Posted February 24, 2009 I completely agree with you, Erickson. The Wherigo-Player on my Colorado 300 simply crashes every time I trie a Wherigo. Quite annoying. I hope Garmin and Groundspeak will fix this in the near future. Quote
+rabe Posted February 26, 2009 Posted February 26, 2009 Hello Ponyhof, There are some WherIGos near Cologne that run on the Colorado: http://www.geocaching.com/bookmarks/view.a...9e-d552f62d14a3 Enjoy! ;-) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.