+kapi80 Posted June 27, 2020 Share Posted June 27, 2020 (edited) How can I see and navigate waypoints of a multicache on a Garmin 66st? We only see the starting point f.i. the parking Edited June 27, 2020 by kapi80 Quote Link to comment
RuideAlmeida Posted June 27, 2020 Share Posted June 27, 2020 18 minutes ago, kapi80 said: How can I see and navigate waypoints of a multicache on a Garmin 66st? Usually the stages will be saved as waypoints, precisely. Look for them on the receiver. 1 Quote Link to comment
+outdoorsoccer Posted June 28, 2020 Share Posted June 28, 2020 4 hours ago, kapi80 said: How can I see and navigate waypoints of a multicache on a Garmin 66st? We only see the starting point f.i. the parking Have you completed the multi-cache before? Possibly you will need to head to the first waypoint to find the coordinates to the second waypoint, enter the new coordinates into your GPSr, repeat steps until you reach the final? 1 Quote Link to comment
+cerberus1 Posted June 28, 2020 Share Posted June 28, 2020 18 hours ago, kapi80 said: How can I see and navigate waypoints of a multicache on a Garmin 66st? We only see the starting point f.i. the parking Your profile says you've done multis, what did you do then ? You won't get all stages to a multi simply because you have a top-o-the-line GPSr. You still need to go to all stages for the final. Similar to outdoorsoccer, I'd go to the first stage, then simply edit those waypoints for each new stage. That's how we've done it since starting. You could Mark for each stage, making changes to coordinates, and hit Save too, if you want to know where all stages are for the future (placing a cache maybe). Quote Link to comment
+IceColdUK Posted June 28, 2020 Share Posted June 28, 2020 Assuming you’re talking about waypoints that are on the cache page... It may well depend on how you load caches onto your Garmin. I load mine (Oregon 600) from GSAK, and the waypoints are then found under: Where To? > Extras. There are then separate lists for Parking, Physical Stages, Virtual Stages, Trailheads, etc. 1 Quote Link to comment
+barefootjeff Posted June 29, 2020 Share Posted June 29, 2020 (edited) Are you asking about multis where the waypoints are all visible (such as virtual ones where you have to read signs or answer questions to get digits for the final's coordinates) or ones where the coordinates of each waypoint are revealed only after you've found the preceding one? For the former, the waypoints will appear on the map with labels that are the cache's GC code with the letters GC replaced by the waypoint's Prefix Code. For the latter, when navigating to the listed coordinates, there will be a menu option called Enter Next Stage or something like that (I don't have a 66 and I gave away my old 62S so I can't check exactly where that option is in the menus). Alternatively you can just create a new waypoint on the GPSr and set its coordinates to the next stage. The coordinates you enter with Enter Next Stage aren't saved and are overwritten the next time you use that function, so if you anticipate revisiting the multi it might be best to create permanent waypoints. Edited June 29, 2020 by barefootjeff 1 Quote Link to comment
+kapi80 Posted June 29, 2020 Author Share Posted June 29, 2020 Bedankt voor jullie antwoorden. In de tussentijd hebben we ontdekt dat als we de geocaches via de laptop downloaden we de waypoints wel zien, maar niet als we het rechtstreeks inladen op internet. De 66st is daar blijkbaar niet klaar voor, maar alleen voor 'losse' geocaches zoals traditionals. Dus dan pakken we de laptop er maar weer bij. Quote Link to comment
+kapi80 Posted June 29, 2020 Author Share Posted June 29, 2020 @cerberus1 Hiervoor hadden we een 60CSX, die had alleen maar de mogelijkheid om de geocaches via de laptop te downloaden en dan was het altijd zichtbaar. De 66ST heeft de mogelijkheid om het rechtstreeks via internet in te laden, maar we hebben nog niet ontdekt waar we de waypoints dan kunnen zien. Bij het downloaden van de GC's via de laptop gaat het wel goed. Quote Link to comment
+Tungstène Posted June 29, 2020 Share Posted June 29, 2020 Well... They (Garmin support) tell it in their FAQ section: "Additional locations, such as parking waypoints or further stages of a multicache, are not downloaded when using the live geocaching feature and would require downloading the .gpx file directly from the geocaching.com website instead." And that's a pity. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.