60CSx find > geocache, Not Working

[+Ming]

Hi All,

 

Been doing this for a while but it seems like my 60CSx isn't working (most likely operator error).

 

ON PC:

Using GSAK (7.7.4.36)

Importing my jzip files

Then GPS > SEND WAYPOINTS

 

ON GPSR

Data/Caches are now on my 60CSx, I can see them....

 

I'll press; FIND > GEOCACHE > ENTER

 

I get; NONE FOUND... Would you like to set up the geocaching options?

 

I'll select; YES, on the Geocaching Symbols page press PAGE to exit.

 

Then press; FIND > GEOCACHE > ENTER and get the same thing...

 

I'm making due by finding waypoints

 

Any help would be appreciated.

 

Thanks,

 

Ming

[+DonB]

Are you using the treasure chest for an icon?

[+Red90]

The icon on the waypoint must be exactly the same as the icon in the Geocaching setup. Carefully look at it. There may be multiple icons that look similar.

[+Ming]

Yes, I'm using the closed treasure chest icon (only have 2, one open and the other closed, listed under Outdoors). I went through all the icons...

[+yellow-bird]

I have an question for Ming.What kind of gps did you use to find all those caches on your profile?

[+MtnShasta]

Have you tried a Find By Name (Cache name or GC code) just to see if the gps can see a cache in your imported filelist and its not a location issue (being to far out from your current location)?

[+Ming]

Have you tried a Find By Name (Cache name or GC code) just to see if the gps can see a cache in your imported filelist and its not a location issue (being to far out from your current location)?

 

I can find by name i.e. FIND > WAYPOINT > MENU > FIND BY NAME

 

I have my pointer in the cluster of caches when I'm trying this.

[+Ming]

I have an question for Ming.What kind of gps did you use to find all those caches on your profile?

 

LOL YB, just my trusty 60CSx

[+Mineral2]

Have you tried downloading a Pocket Query directly from geocaching.com to your GPS?

[+MtnShasta]

Make sure that you are setup to 'Show Cache Not Found. If set to 'Show Found' and there are non in your unit it will give you the symptoms you are seeing.

[+Ming]

I used EasyGPS, imported my GPX's and uploaded them and the 60's working like a charm...

 

Not sure what going on with GSAK but I'm happy.

 

Thanks everyone for you help!!!

[jholly]

I used EasyGPS, imported my GPX's and uploaded them and the 60's working like a charm...

 

Not sure what going on with GSAK but I'm happy.

 

Thanks everyone for you help!!!

What is going on with GSAK is your mapping the icons incorrectly. On the send to GPS dialog make sure the geocaches are set to Geocache, i.e., Traditional=Geocache.

[+DonB]

I used EasyGPS, imported my GPX's and uploaded them and the 60's working like a charm...

 

Not sure what going on with GSAK but I'm happy.

 

Thanks everyone for you help!!!

You beat me to it, that's all I use is EasyGPS and was going to suggest you trying it. I didn't think of it on my first post.