+qq7 Posted August 19, 2012 Share Posted August 19, 2012 Hi, when I connect my Dakota20 to pc via usb cable, even if to be shown as external device, the Dakota start up itself like when I turn it on for outside use. I have to unplug & plug it again to pc in order to have it as external device. Have somebody expercienced & solved such a problem? tnx Flavio Quote Link to comment
+firestars Posted August 19, 2012 Share Posted August 19, 2012 I have just messed about with mine Flavio and I cannot replicate that problem but I know what you are describing. Have you tried another USB port? Something is sending a signal to the Dakota to switch on. Quote Link to comment
+Davequal Posted August 19, 2012 Share Posted August 19, 2012 That is normal behavior for a Garmin. Either in USB mode or Garmin my eTrex 20 does that. My old Yellow eTrex did it as well. Quote Link to comment
+eusty Posted August 19, 2012 Share Posted August 19, 2012 Set Setup->System->Interface to spanner, then it will give you the option to start in mass storage mode when you connect. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.