Lezavw90 Posted August 12, 2010 Share Posted August 12, 2010 My pc doesn't recognize my Oregon 200, I plug in the usb cable and the gps just turns on. I've never seen it turn on completely under usb power. I'm runnin 3.82. Any ideas? Thanks Quote Link to comment
+splashy Posted August 12, 2010 Share Posted August 12, 2010 Set the gps to spanner interface. If it is to spanner and it worked before, set the gps off and disconnect from usb, push the on button and while keep pushing connect to usb, after 10 seconds lose the on button. Some usb cables won't work. Quote Link to comment
+PDOP's Posted August 13, 2010 Share Posted August 13, 2010 Set the gps to spanner interface. That option is not available on the 200 model. Quote Link to comment
Lezavw90 Posted August 13, 2010 Author Share Posted August 13, 2010 Thanks holding the power button worked. Quote Link to comment
+PDOP's Posted August 13, 2010 Share Posted August 13, 2010 ... I plug in the usb cable and the gps just turns on. I've never seen it turn on completely under usb power. I'm runnin 3.82. Any ideas? Try another USB cable. See question 9 under http://garminoregon.wikispaces.com/Power Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.