rsaxvc Posted December 17, 2009 Share Posted December 17, 2009 (edited) Find Garmin Carabiner Clip Remove Carabiner from webbing. Back out strip of webbing and lay on plastic in opposite direction. Add tape. About 6 inches worked well. Insert Carabiner. The upper clip in the pictures is the flip mod. The lower clip is an original. Edited December 18, 2009 by rsaxvc Quote Link to comment
+Chrysalides Posted December 18, 2009 Share Posted December 18, 2009 That's not firmware, that's hardware Quote Link to comment
seldom_sn Posted December 18, 2009 Share Posted December 18, 2009 A bit firmer ware solution than I'd like to see, but it certainly addresses the problem. I guess the folks at Garmin either are good at reading upside down or need to view their Oregon's closer than belt level. Quote Link to comment
+fegan Posted December 18, 2009 Share Posted December 18, 2009 Having a Colorado upside down will affect accuracy. I'll stick with the OEM clip. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.