+fhexplorers Posted May 22, 2008 Share Posted May 22, 2008 I have a geko 301 and was trying to fabricate a special holder for the GPS. It has a nut on the back of the unit that will accept an screw. Does anyone know the size and thread of the screw I need? Thanks Quote Link to comment
+TazDevil091102 Posted May 22, 2008 Share Posted May 22, 2008 (edited) Not right off hand but you could probably go to Auto Zone and see if they have thread gauges. That should tell you what type of thread you have. Edited May 22, 2008 by TazDevil091102 Quote Link to comment
+briansnat Posted May 22, 2008 Share Posted May 22, 2008 Not a getting started issue Quote Link to comment
MagicDrop Posted May 22, 2008 Share Posted May 22, 2008 go to any hardware store... NOT Home Depot or big stores like that. They can get you the screw you need and you can buy like 5 of them for around $0.25 total. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.