+Three Frogs Posted May 8, 2004 Share Posted May 8, 2004 I just got a GPSMAP60CS and I have been trying to down load geocach waypoints to it. I have them in EasyGPS but cant seem to download. I have the GPS hooked to the computer by USB. Is ther something in the setup that must be changed? Quote Link to comment
+Wienerdog Posted May 8, 2004 Share Posted May 8, 2004 (edited) Hmmm I have always loaded waypoints using the serial port, a holdover from the G-3 G-V. I don't think EasyGPS will work with USB yet. Edited May 8, 2004 by Wienerdog Quote Link to comment
scarey2004 Posted May 8, 2004 Share Posted May 8, 2004 try easymps it works for me Quote Link to comment
+Three Frogs Posted May 8, 2004 Author Share Posted May 8, 2004 Thanks Scary2004. THat worked like a charm. Quote Link to comment
topografix Posted May 8, 2004 Share Posted May 8, 2004 EasyGPS 1.3.7 and later support USB transfers. Quote Link to comment
+Sweetpea of the Bitterroot Posted May 16, 2004 Share Posted May 16, 2004 Nope.... Just down loaded and tried it. USB is only supported through a serial connection. I would need to buy the serial port connector. Then what's the point of having the USB connection? I'll try the Easy MPS program. Quote Link to comment
+4x4 Trail Busters Posted May 17, 2004 Share Posted May 17, 2004 Open EasyGPS and click on FILE then Preferences then My GPS Receivers then click on Settings then click in the box in the lower left corner that reads USE USB Then click OK. You should then be able to download by USB once you have selected which unit you are using. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.