+infosponge Posted August 14, 2002 Share Posted August 14, 2002 I was setting up network time sync software (NTP) on all the computers in my office so that they all stay consistent (important when you have shared files in use across a network) and I read that there are drivers for generic NMEA GPS units so that you can use the recieved GPS clock signal as your master clock. Since I have a spare GPS, I am setting this up. I hooked up my old Magellan MAP 410 to a 12V supply on the PC by hacking up a spare power/data cable. I'm running the serial data into a port on a PC running Linux which will serve as the master time server. Since the MAP410 has a detachable antenna, I suction-cupped it to the window of my office. So far so good. My question is, since this will be running and collecting data over weeks and weeks, is there any useful/interesting data I can gather while I'm at it? I'm assuming that I could log the current calculated position, ephemeris, and signal strengths. Will odd changes in the signals help me detect incoming storms or anything like that? Quote Link to comment
+raouljan Posted August 14, 2002 Share Posted August 14, 2002 Very cool hack! How 'bout keeping track of the EPE (or HDOP) and then back correlating them to sun spots Quote Link to comment
dtrayers Posted August 15, 2002 Share Posted August 15, 2002 It's called GPS Sky. http://www.geocities.com/kiwi_36_nz/gps_sky/gps_sky.htm Quote Link to comment
+pizzachef Posted August 16, 2002 Share Posted August 16, 2002 I thought the clock in the gps unit was set by the user...does it really recieve the time fron the satellites?! I have a Magellan 320. The reason I thought it was user-set is I drove to a different time zone and the time didn't change. The gps should know what time zone I'm in and correct the time shouldn't it? -pizzachef Quote Link to comment
+infosponge Posted August 16, 2002 Author Share Posted August 16, 2002 Your GPS Reciever is probably one of the most accurate clocks in your house. You may set the time zone and a rough estimate initialy, but once you're getting signals it should be corrected continuously vs. a bunch of reference clocks. Quote Link to comment
+infosponge Posted August 16, 2002 Author Share Posted August 16, 2002 That looks very cool! I'm running a daemon on Linux called 'gpsd' which can make data available to a bunch of different programs. Right now I'm working on a data logger that just dumps everything to a big database so I can do stuff with it later. quote:Originally posted by dtrayers:It's called GPS Sky. http://www.geocities.com/kiwi_36_nz/gps_sky/gps_sky.htm Quote Link to comment
+phantom4099 Posted August 16, 2002 Share Posted August 16, 2002 Yeah, but I had a strange occurance with my merigold. It was like 2+ min behind (even after letting it get a fix, the unit still place me in the right area). I determined it was wrong by comparing it to a 315, a computers clock after I synced to the internet, the time from the satellite televison reciever, local televsion, and a digital phone. All of these usually desplay the same time. After I did a full reset it matched up pretty well with the 315 (the meridan has always been a few seconds behind). I should mention that the unit was wrong for several days, I waited to reset till I found the 315 to make sure. Wyatt W. The probability of someone watching you is directly proportional to the stupidity of your actions. Quote Link to comment
teknofreak Posted August 17, 2002 Share Posted August 17, 2002 Try this site and you should have the most accurate clock on earth. www.time.gov Quote Link to comment
peter Posted August 17, 2002 Share Posted August 17, 2002 quote:Originally posted by Martín:Try this site and you should have the most accurate clock on earth. http://www.time.gov The caveat on that site seems to say otherwise: "This web site is intended as a time-of-day service only. It should not be used to measure frequency or time interval, nor should it be used to establish traceability to NIST or the USNO." OTOH, when your GPS rcvr. is determining your position to an accuracy of about 30', it is also necessarily determining the GPS system time to a corresponding accuracy, which, at the speed of light, amounts to about 30 nanoseconds (i.e. billionths of a second). Of course the processor then takes its time actually updating the display and outputting any message, so the actual displayed time can be off by up to a second. Many of the board-level GPS rcvrs. have a timing output accurate to a microsecond. Quote Link to comment
rghermes Posted August 19, 2002 Share Posted August 19, 2002 Your clock on your digital cable tv converter is very accurate too. "I am umbilically connected to the temperate zone. It's brought me life. It's brought me love, I never have outgrown"----J. Buffett Quote Link to comment
+Crusso Posted August 19, 2002 Share Posted August 19, 2002 Checked my V against the .GOV site. Accurate to each other w/in about a half sec. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.