+javthrowr Posted December 25, 2020 Share Posted December 25, 2020 Clicking on "Update Coordinates" under the Admin Tools section of the cache page takes you to the logging page, but is defaulting to "Owner Maintenance" instead of "Update Coordinates". 1 1 Quote Link to comment
+Estraneo Posted December 26, 2020 Share Posted December 26, 2020 Today I had a similar issue. I clicked on "Enable" and it directed me to post "Owner Maintenance". I was so sure that I was enabling the cache that I didn't even check the log type. I found out later. Quote Link to comment
+baracutio Posted December 27, 2020 Share Posted December 27, 2020 Same for 'Archive' button as well... Quote Link to comment
+Isonzo Karst Posted December 28, 2020 Share Posted December 28, 2020 Windows Firefox, scripts off or on. I'm using "old logging" which offers this wrinkle: there is no Update coords in "old logging", in any session, if it's clicked from the admin box, all owner admin box logging goes to New Logging - > Owner Maintenance. If you're using old logging, and do not click Update Coords in the admin box, the other log types will direct to the correct log: archive, enable/disable. Quote Link to comment
+Bl4ckH4wkGER Posted December 28, 2020 Share Posted December 28, 2020 Thank you for reporting this issue. We will notify our engineers. Quote Link to comment
+Beanercacher Posted December 30, 2020 Share Posted December 30, 2020 I temporarily disabled my cache to do maintenance. I did physical maintenance, and then updated the description and coordinates. When I was finished, clicked the "enable" button. The "owner maintenance" box opened up, and I described the maintenance I did. Then I posted it. The log showed up as "owner maintenance," but the cache was still disabled. So I clicked the "enable" button again. Again, the "owner maintenance" box opened up, and this time I just posted, "Good to go!" and the cache is still disabled. How do I enable my cache? 1 Quote Link to comment
+Bl4ckH4wkGER Posted December 30, 2020 Share Posted December 30, 2020 @Beanercacher After clicking through to the log page, you can just select the appropriate log type from the drop down menu. You are not tied to the default selection. 1 1 Quote Link to comment
+barefootjeff Posted January 25, 2021 Share Posted January 25, 2021 Just bumping this as a month on it's still not fixed. Or if it's no longer possible for the Admin Tools links on the cache page to generate the correct log type, maybe those links should be removed as it's just creating confusion, particularly with new players trying to update their coordinates. 1 Quote Link to comment
+Bl4ckH4wkGER Posted January 25, 2021 Share Posted January 25, 2021 @barefootjeff As the reports came over the holiday break and code freezes, there were some natural delays. Currently, the bug remains in the backlog. It was increased in priority a couple days ago and we are also looking forward to it being resolved. I don't believe that removing functionality that was only added back in October 2020 is a very effective and feasible suggestion. No need to bump threads. If there is anything new to report we will let you know without additional reminders. Thank you for your patience. 1 1 Quote Link to comment
+barefootjeff Posted January 26, 2021 Share Posted January 26, 2021 4 hours ago, Bl4ckH4wkGER said: @barefootjeff As the reports came over the holiday break and code freezes, there were some natural delays. Currently, the bug remains in the backlog. It was increased in priority a couple days ago and we are also looking forward to it being resolved. I don't believe that removing functionality that was only added back in October 2020 is a very effective and feasible suggestion. No need to bump threads. If there is anything new to report we will let you know without additional reminders. Thank you for your patience. Sorry, but after seeing a newbie recently archive their cache and create a new listing because they couldn't figure out how to update the coordinates with the broken links, I was starting to wonder if manually changing the log type after clicking on the link was how it was meant to work now. Not being American, I didn't realise you guys had an extended shutdown post Christmas. 1 1 1 Quote Link to comment
+Bl4ckH4wkGER Posted February 11, 2021 Share Posted February 11, 2021 This has been fixed now. 1 Quote Link to comment
+barefootjeff Posted February 11, 2021 Share Posted February 11, 2021 30 minutes ago, Bl4ckH4wkGER said: This has been fixed now. Thanks . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.