+cuzz_cache_cliff Posted February 8, 2011 Share Posted February 8, 2011 How do I load the field notes from the Delorme gps to the geocaching web page? Can I do it all at once, or do I have to bring up the individual caches then upload the field notes and where do I find that button??? Thanks ahead of time. CCC Quote Link to comment
+IBcrashen Posted February 8, 2011 Share Posted February 8, 2011 http://www.geocaching.com/my/uploadfieldnotes.aspx Quote Link to comment
ao318 Posted February 8, 2011 Share Posted February 8, 2011 (edited) Use this link to help you. The most important step to all of this is when you plug the PN into the computer and you have the choice between "Data" or "Map", choose "Map". Then scroll down to "Transfer to Internal" and this will allow your device to be found on the computer and you can open it up to access your field notes. Once downloaded, remember to delete the field note folder from your unit from within the opened window if you want to. Edited February 8, 2011 by ao318 Quote Link to comment
+BuckeyeClan Posted February 8, 2011 Share Posted February 8, 2011 Do you have the Cache Register program? It does it automatically when you connect using that. Quote Link to comment
+cuzz_cache_cliff Posted February 8, 2011 Author Share Posted February 8, 2011 Do you have the Cache Register program? It does it automatically when you connect using that. Thanks Buckeye, I will have to look to see if I have that program. Thanks Quote Link to comment
+cuzz_cache_cliff Posted February 8, 2011 Author Share Posted February 8, 2011 Use this link to help you. The most important step to all of this is when you plug the PN into the computer and you have the choice between "Data" or "Map", choose "Map". Then scroll down to "Transfer to Internal" and this will allow your device to be found on the computer and you can open it up to access your field notes. Once downloaded, remember to delete the field note folder from your unit from within the opened window if you want to. Thank you there ao318, I guess I have been transmitting the wrong info, I will try that the next time. Thanks again. Quote Link to comment
+BuckeyeClan Posted February 9, 2011 Share Posted February 9, 2011 Do you have the Cache Register program? It does it automatically when you connect using that. Thanks Buckeye, I will have to look to see if I have that program. Thanks Read the information and download it from here. Just take note that if you upgrade to the 2.8 firmware, you may not be able to use your version of the mapping software. (This may be a moot point if you bought your PN-40 recently.) Any other techie questions, you might want to post in the "GPS and Technology" forum here, or else check out the Delorme Forums. Losts of friendly folks who are happy to help! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.