sviking Posted September 20, 2010 Share Posted September 20, 2010 Today, I got some time to play with my 60CSx in the car since I wasn't driving. I noticed it would not plot the elevation on the elevation screen with either "Plot over Distance" or "Plot over Time" selected. It would plot the ambient and barometer (in/hg) readings, but not the elevation. Any clue as to why? I set the range on the Y axis down to 360 feet and the X axis to either 30 seconds or 0.12 miles, which are the smallest selections. The elevation changes and reads fine on the same page as does the VSI type reading showing the rate of climb or descent in feet per minute. It just won't plot on the main X/Y axis part of the screen. I don't ever remember having any problems with this before. I didn't see any menu settings that would turn off or otherwise affect the plot. Quote Link to comment
sviking Posted September 20, 2010 Author Share Posted September 20, 2010 Should have just looked up "hard reset" first. That fixed it. Weird as to why it stopped in the first place, though. Quote Link to comment
sviking Posted September 20, 2010 Author Share Posted September 20, 2010 Hmmm... I set all my desired user settings and now the plot doesn't work anymore. Back to square one. Quote Link to comment
sviking Posted September 21, 2010 Author Share Posted September 21, 2010 Bump. Anyone? Quote Link to comment
+GeoDigger1222 Posted September 21, 2010 Share Posted September 21, 2010 Do you have it set to record your track? I know on my 60csx I have to have the track set to record before getting the elevation plot. Otherwise it will just show the current elevation. Hope this helps. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.