Garmin Nuvi macro

[+Team Bashspa]

I have set my radius alerts at different settings 3000 ft, 1800 and so on. Some times I miss the cache cause I drove by the turn off . Sometime it sounds like I won the big one alarm just keeps chiming in a cache rich area. My question from those that use this feature what do you think is the best setting . It would be nice to be able to change it on the unit or turn off the feature so you can navigate with out all the alerts.

 

Thanks

[+sodajerk]

I think you might have answered your own question. If in a cache sparce area I use a wider distance, in a cache rich area I use a small distance, sometimes as small as 50 feet. I do not know how to change it on the fly.

[+EScout]

The problem is when there are several caches within the radius distance. One location where I often park has several within a short radius and it goes into an alarm loop that does not stop (they are urban micros close to my office-- two reasons I have not searched for them.)

 

Since caches should be at least 528 feet apart, if you use this distance you will only have one alert at a time.