capt caper Posted January 2, 2008 Share Posted January 2, 2008 I have an old Data Combo Power Plug 4 post type and would like to hook it up direct to my 60cs. Does it have to be 3 volts going into the 4 prong plug in the back or can it be 12v. Someone said it should have a reducer in the wire to get it to 3 volts. Quote Link to comment
+PDOP's Posted January 2, 2008 Share Posted January 2, 2008 According to the online manual for the 60CS it will accept 10 to 32 VDC. There were two types of the four pin power adapter one of which has a central hole for the low voltage required by units like the old GPS12 which had a "post" in the middle of the round 4 pin receptacle. The post prevented the higher voltage (12vdc output) adapter from being plugged into the GPS12. So if your old Data Combo Power Plug 4 post type has no central hole it should work fine. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.