Memory Map Working With Explorists

[+kevenh]

At the moment I'm struggling with route files on my E600 that have come from the memory map created routes.

 

The transfer to the GPSr seems OK, but when I try use the routes, the file is empty!

 

This is one file with >6 routes in it.

 

A file that I sent with just one route in is more reliable.

 

Any operator errors likely to be going on? Or am I exceeding waypoint/route limits for one route file!?

 

Or just another E600 flakiness

 

Thanks for your comments

[+kevenh]

I'm still struggling with this!

I'm sure it once worked better, so I'll try a complete reset!

 

Last memory map to explorist export method I tried was to save and load each route individually into MM and then export that 1 route to it's own route file on the E600's route directory in the SD card.

 

Sometimes the individual routes load from their file, sometimes they don't!?

[+kevenh]

Hold on! Just tried one more time, and some routes load reliably (well at the mo any way [] ).

 

I need to check on waypoint limits for the routes.

 

50 iirc is the limit.

[+embra]

50 it is.

[+kevenh]

thanks embra

 

If I'd gone slower I might've spotted the problem earlier.