Jump to content

Maggie cabling question


zilla

Recommended Posts

I have a Meridian Gold and last fall purchased a vehicle mount bracket for it.. The one with three suction cups.. I have used it before, but today I tried to connect my cable so I could run the GPS on the cig lighter cord.. I can't figure out how to get the cable connected using the bracket. Is there a special trick to this?? I have connected the cable before, but not using the bracket.. Is there a different cable that I need to use ?

Link to comment

nothing. See, aren't I generous? icon_biggrin.gif

 

The hole has a sliding gate. You will see the pin to lift it. Slide it up and put your plug in, and let the gate come down. It will engage some grooves to keep it in place.

 

don

 

PS-- If you aren't already, position the mount and cradle so that it hangs straight down from the windshield, with the suction cups at about rear-view mirror height. Orders of magnitude more stable and vibration-free.

 

[This message was edited by Cachetrotters on January 24, 2003 at 06:26 PM.]

Link to comment

I found the sliding gate,but my cable connector has no groove in it.. I looked at this earlier, but am thinking I have an older version of the cable, a I bought it before the Meridian was made and was using it on a 320.. .... Does your cable have the groove? Mine doesn't .. And to even get it in the hole I had to trim the little wings on the sides, because it wouldn't fit at all..

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...