PN 40 FW 2.8 & CR.. Help!

[+Jim McDonald]

Haven't had an opportunity to utilize gps since downloading all the new firmware and Cr 2...and not having any luck getting caches to gpsr. Anyone got a step x step how to??

[+Hank30721]

Haven't had an opportunity to utilize gps since downloading all the new firmware and Cr 2...and not having any luck getting caches to gpsr. Anyone got a step x step how to??

 

Head over to the Delorme forums and there are many folks who can help you out. I'm not very handy with CR 2, I just load PQ's via TopoNA.

Edited November 9, 2010 by Hank30721

[kidcabe]

Team DeLorme here. Please try this:

 

Before trying to send over information please try the following:

 

Make sure you have an SD card in the device.

On the PN-40 go to Menu>Geocaches>Menu>File>New and give the new file a name.

Open Cache Register and try to transfer the Pocket Query to the device.

If the transfer completes, on the PN-40 go to Menu>Geocaches>Menu>File>Open and open the Pocket Query.

 

If you are still having issues please reply with the steps you are taking and the resulting behaviors.

Thanks and together we'll get it figured out.

 

--Team DeLorme