How do I project a waypoint using the Garmin Colorado 400C

[+GEO MS P]

I have the Colorado 400C and want to know if I can do projected waypoints? If so, HOW??

[+fegan]

I use the Sight 'N Go feature to project a waypoint (on my 400t).

 

From the Compass screen, press the Left button to access [sight 'N Go]. Rotate to the desired heading and [Lock Direction], then you'll get options to: [set Course], [Project Waypoint] or [Re-Sight].

[+Red90]

http://garmincolorado.wikispaces.com/Waypo...n%20Colorado%3F

There are two ways. The first allows you to project a waypoint from another waypoint if you know the distance and bearing. Goto WhereTo->Waypoint->[select waypoint]->Options->Project Waypoint and enter the distance and bearing. If you want to project a waypoint from your current location Mark a waypoint first and then follow the procedure above.

 

The second way to project a waypoint is to use Sight'N Go. This method allows you project a waypoint by entering a distance and taking a compass bearing. First, goto Others->Compass and calibrate the compass. Once the compass is turned on and calibrated hold the unit horizontal, press Options->Sight'N Go, point the unit in the direction you want to go, select Lock Direction, select Project Waypoint and enter the distance.