+Berta Nick Zoey Posted February 24, 2008 Posted February 24, 2008 My 60CSX is about 18 months old. For the past 6-8 months I have to push the power button repeatedly to get it to power up and to turn off. I e-mailed Garmin about it and the tech told me to upgrade the firmware/software. That did nothing to help the issue. Has anyone else experienced this problem and is there a fix other than replacing the unit entirely? Quote
jimfish Posted February 25, 2008 Posted February 25, 2008 My 60CSX is about 18 months old. For the past 6-8 months I have to push the power button repeatedly to get it to power up and to turn off. I e-mailed Garmin about it and the tech told me to upgrade the firmware/software. That did nothing to help the issue. Has anyone else experienced this problem and is there a fix other than replacing the unit entirely? No issue here. BUt I do tend to hold the buttton down until the screen boots. A short push doesn't do much.. Never heard of the 60 haven't this as an issue? Quote
+get outta my way Posted February 25, 2008 Posted February 25, 2008 I'm pretty sure you're supposed to hold the button for >1 second. Just a quick push is for the backlight adjustment on mine which is about 6 months old. Hope this helps Quote
+Berta Nick Zoey Posted February 25, 2008 Author Posted February 25, 2008 Im aware of the proper amount of time needed to power up or down. I feel as if the unit is defective and was wondering if anyone else had experienced this problem. Quote
+kwvers! Posted February 25, 2008 Posted February 25, 2008 Im aware of the proper amount of time needed to power up or down. I feel as if the unit is defective and was wondering if anyone else had experienced this problem. I had the exact problem with my 60cs. Guess I just wore it out . If the Garmin was left on the dash and got warm it seemed harder to turn on or off. Never had it fixed...eventually lost it and now have a 60csx Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.