+Team Gryarvold Posted August 2, 2006 Share Posted August 2, 2006 We found our first 2 markers today, and had a few that we did not find. If we use metal detectors will they help locate buried markers that should be there but you can't see. Has anybody tried this before? Quote Link to comment
Bill93 Posted August 2, 2006 Share Posted August 2, 2006 (edited) Yes it can be a big help. Read the thread that is currently running on the sale on detectors. It is very important to understand everything the data sheet can tell you before you start digging. There is hardly any place on the continent that does not have buried trash, so if you just go where your GPS takes you and use the metal detector then you will be very busy digging useless holes. The NGS data sheet is more current and more complete than the one you get from the geocaching site. To find benchmarks that have SCALED coordinates use the GPS as a driving aid to get to the right neighborhood. Then put it away and follow the description. If the description is confusing, sketch yourself a map. A tape and compass can be quite useful here. After you think you know where it was within a small margin then it is time to probe and use the metal detector. For stations with ADJUSTED coordinates, then the GPS should take you within its indicated accuracy of the mark. Measurement from reference objects in the description is still more accurate. Use caution in digging because it can cause an expensive ruckus if you sever a utility line. In most places if I dig at all, after checking for utility signs, I use a hand trowel so I'll stand less chance of doing damage. Edited August 2, 2006 by Bill93 Quote Link to comment
+Team Gryarvold Posted August 2, 2006 Author Share Posted August 2, 2006 Thank you for answering that for me. I saw the Radio Shack post after I posted this one. Now I just have to tell my other half that we need one of those little do-hickies. It's a good thing that he has been wanting one for awhile. You mentioned the NGS data sheets. When I searched for the data sheets for the 2 markers that we found, the search came back with nothing but a few words about not being able to pull up the data because either the vertical or horizontal measurments were not there. However I was able to see the sheets that were on the Geocaching site. Why is that. Am I searching in the wrong spot for the sheets? Quote Link to comment
Bill93 Posted August 2, 2006 Share Posted August 2, 2006 I used the link in my earlier post, typed in on two lines BX2968 BX3033 clicked on the buttons, and I got data sheets for both. Don't forget to select the ones you want or click "select all" when you get the list page. There are also other search options at the NGS site, and you can edit the number on the end of this link to get other single sheets http://www.ngs.noaa.gov/cgi-bin/ds_mark.prl?PidBox=mf0217 Quote Link to comment
+Team Gryarvold Posted August 2, 2006 Author Share Posted August 2, 2006 You have been a big help. I was looking in the wrong spot for the sheets. I got them all downloaded and into GSAK and then onto the map. I had no idea there were so many Benchmarks. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.