60csx - A Few Questions

[+guyanonymous]

I have a few questions about the 60CSx.

 

Thus far it's been great, but there are a few things I've not figured out how to do yet:

 

1) Delete all waypoints (I can do it one by one, but want to do en mass)

2) Switch maps (I have portions of the topo and the city loaded on the card)

3) Hard reset the machine to clear everything

 

Any help would be appreciated.

 

Thanks!

 

David

[+guyanonymous]

OK, I've been able to answer a few of my own questions...

 

1. To delete all waypoints, from Trip ocmputer scren, hit menu and select reset - you can choose what to clear/delete/reset.

 

2. To change maps: From the Map page, press MENU » 'Setup Map' » ENTR. One of maps you've loaded will be listed. Press MENU again, then » 'Hide City Select North A' » ENTR. You can use this procedure to hide or show any map (including the base map) that is loaded. If you have firmware 3.5 or higher, you can hide or show any set of maps. This area is discussed in the forums here and in the few following posts. (Please excuse the rant).

 

3. To hard reset: Hold ENTR and PAGE while powering up to master reset the unit. Details on doing a hard reset can be found in this post.

 

 

Now why couldn't I notice this stuff in the manual (is it even there?)

[robertlipe]

This page hasn't been updated for the 60csx, but in all three cases, the answer is the same for both:

 

http://home.houston.rr.com/gpsr/