jaspel

Thanks again, I still havent had time to redo the wiring, but I just wanted to contribute. More than likely you have a ps2 port. Newer laptops combine this with an s-video out. This would bealot easyer to port than a usb...

well, im not an electronics major, just an electrical engineer. here is a 4.5 battery. chip wise, check somthing like this out(first one). I'm pretty sure a ground connection is necessary, but i could be wrong. (transmit proticall) Thanks for the pdf, i couldnt find anything that nice. The one i found conflicts, so I will try this one out tomorow. Let me know if you need any help with that.

Thanks, Perhaps I should be more specific. I have already made a cable. I need someone to check on the back of theirs to see if pin 2(data in) and pin 4(ground) are connected naturally. You can check this using a multi meter. thankx

Hi, I spent some time tonight puting together a cable for my rino 110. I dont have the pacience or the cash to buy a plug, so its soddered right onto the pins. Unfornutaly I cant get the computer to detect it. I put a potietiometer to the pins and the upper left and lower left are coming back as a strong connection. Could someone please check the back of their rino 110/120 to confirm that these two pins should be connected. If not I will need to take it off, check that i didnt fry the gps, then take apart the cable and redo it. Thanks.. Jaspel PS: I still have the origianl firmware on it, should i update to the newest, keep it where i'm at or somewhere in between? I know Fcc has enabled and disabled some things throughout the last 4 years.