Hi, hoping someone can give me some advice before i throw both this laptop AND my gps under the nearest moving vehicle!!!
Been caching since April using my HTC phone, which i have found to be really good other then i need to take around 6 spare batteries with me for an afternoon caching, so i decided to purchase a 'proper' gps thinking this will be more accurate and save in batteries.
I did some research, obviously not enough, because i ended up buying a Garmin GPSmap 60c. I thought i'd checked that this model did paperless caching, but have since found out it doesn't really because you can only download the co-ords and the name :s , so this was my first mistake.
Anyway. i downloaded a cache to the garmin and my phone and off i went to try to find it. I am dissapointed to say that the phone was much more accurate then the garmin, one showing 3 meters accuracy whilst the other showing 30ft and both the compasses pointing in different direction!
But i thought i'd at least give the garmin a second chance and perhaps download a few to do one evening, so on the advice of a friend was recommended to download the opensource uk map. Which is what i have been trying to do for the last 3 hours
Not really sure what i am doing, but have followed all the instructions i could find, here's what i have done....
Downloaded and installed the garmin usb driver - control panel now show Garmin USB GPS v2.3.1.0
Downloaded, unzipped and saved the map GMAPSUPP.img
Downloaded sendmap20
Opened up sendmap20
select Add Maps
browse to the saved GMAPSUPP.img which then shows lots of files in the 'maps to upload' window named UK Mapset Without Contours OSM-tile: xxxxxxxx (where xxxx is a different number for each file)
Press Connect this correctly shows my gps 'GPSMap60C Software version 4.20
press Upload maps to GPS opens a dos box that shows Sendmap20 pro rev 6.7
Trying:usb
another blank message box showing Sending maps
and thats it!!
Sorry it's abit longwinded but am i doing something wrong??
Tried creating a shortcut, changing the target to include -h but all i see is a dos prompt box flash up then dissappear, but the program doesn't start up
Any help would be appreciatted