Hello,
from another forum in Germany I know about 6 mountainbikers (no geocaching) who have the same problems and wishes :
firmware corrections:
1. The 600 comes up with a message "poor GPS coverage". This means, the reception is bad. If you switch to the navigation screen you will see that there are approximately 4 to 8 satellit with 100% reception available! This does not make sense. The only way to make sure that this message does not come up is to switch off the function: GPS fix (this means I will never be able to work with the function GPS Fix !!!).
2. Sometimes the 600 freezes if I disconnect it from my PC.
3. I f you have a track with 500 or 800 or 1400 trackpoints on your SD card or in the internal memory, it takes very long (sometimes minutes) to display the file structure of the memory. (at this point we are not talking about the selection of a track or to load and display a track, we are talking only of showing the file structure of the 600 on the SD card or int. Memory, nothing else).
wishes:
1. possibility to change the color and the width of the track line (like Garmin).......(if you use the 600 with a mountainbike or motorcycle, currently it is hard (impossible) to see the really small track line on the display).
2. start a track from everywhere, not only from the beginning. switch off/on manually the "rubberband" of the track.
3. more waypoints (10.000 instead of the current 2.000).
4. for the autorouting function I like to change the duration in seconds and the loudness of the beeps. Currently you have to wait until you crossed the road or the curve before the beep switches of automatically.
5. It should be possible to change (correct/calibrate) the value of the temperatur and the barometer. Currently these values are not useable because they are not correct.
6. a small battery sign on each screen
7. the elevation gain (difference in altitude) should be added automatically.
rgds Filiale
