The Cielens Clan

Is it possible to add points of interest to the City Navigator Australia V5? I want to add more POIs but don't want to have to add them as waypoints. Also is it possible to remove individual POIs from the database on the GPSr? There is alot I will never use, and others I need. BTW this is for a 60CS. Thanks in advance

Surely if the units have built in temperature sensors, the firmware could be setup to access the information and present it on the screen? If it is continually accessing the sensor to ensure unit accuracy it must be keeping the data somewhere? Does anyone have a contact @ Garmin tech. support who may be able to answer these questions? I tried contact tech. support through the web site but have not heard back yet.

Sorry, I was going to put it on my post. With the unit off, turn it on whilst holding down the enter button. To get out of this screen you then have to turn the unit off then on again. Hence my dismay.

I have emailed this enquiry to Garmin as well. As many 60CS users would know by now, when you enter the system screen on startup, a number of readings are given. One of these is the ambient temperature. My limited tests so far indicate that the temperature is relatively accurate. Does anyone know if Garmin are planning a firmware update that will enable owners to access this information whilst the 60CS is in general use? As it is not practical to be continually turning the unit on and off just to get the temperature. Perhaps everyone who owns a 60CS should start pestering Garmin to see if they would consider implementing this feature. They may come back a say it is impossible for whatever reason. But why wouldn't they want to make one of the best units on the market more saleable. It would also be another marketing point over the Magellan unit that measures both temperature and pressure.