Cyclops

I wrote a Wherigo with Urwigo. It runs great on an iPhone (which is what I own). When an Android user tries to run the cartridge, they do not get the first zone to light up. Is there a way to bug this. TIA

Yesterday and today I was trying to upload two different WhereIGos. I kept getting the below error. Just checked my cartridges and they are both there. One of them twice. I'm sure I tried uploading them more than these numbers.

I also have this issue sometimes. Except it can take several seconds before my "home area" caches are replaced with the proper caches.

I've been noticing this for a few months at least. The images I'm posting show the progress better then I can perhaps describe it. Basically a Pocket Query I run (shows events for just seven days) returns ten caches. I'll click the "You can preview the search here." link to get the "Running Pocket Query:" page which shows ten caches as did the previous page. On the "Running Pocket Query:" page, I'll click the "Map this Location" link to get the map. The map only shows six caches. I've seen this with other Pocket Queries that I have run with small returns. It could be happening on Pocket Queries that return larger number of returns, I just don't notice it.

I did name my project with spaces. I've removed them. Are spaces a problem? I've used them everywhere. The URwigo compiler had no problem with them. I'll try putting that code back in when I upload a new version.

I can now get a cartridge to download from the Wherigo site. In the project's "OnStart" event I was doing a Concatenate of sStart (a string) and Butcher Park Tour.Version. I delete the concatenate and it works. For reference here's the contents of the sStart; Your task is to move from one feature to the next in the park, following the zones. There are a total of ten zones spread out through the park. As a warning, the grass south of the large oak trees in the northern area, can hold water after a rain. At the end of the tour you will be rewarded with the final coordinates and a hint. Good luck! You are playing version Thanks to everyone's post but especially to Ranger Fox's.

I emailed Groundspeak and they replied "At this time we are not able to provide technical support for Wherigo Caches. Please try posting your question in the Wherigo forums. Geocachers in these forums can usually provide you with the best support." I guess I shouldn't be surprised with their reply. Thanks to Ranger Fox for some good tips. I'll try them first and if I'm still getting the error, I'll take you up on your offer. Does Wherigo.com re-compile what I upload to them?

I'm working on my first Wherigo cache. When I try to download the cartridge to my computer from www.Wherigo.com, I get the first big message below. When I try to download it from the Wherigo app on my iPhone 7, I get this error. Download Error There was an issue with the cartridge download service. Please try again later or contact Geocaching HQ. (I have not contacted them as I wanted to try this place first) Error During Upload System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> Exception of type 'System.ApplicationException' was thrown. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Wherigo.GSPCartridgeService.CartridgeService.GetCompiledCartridgeWithMetaData(GWZMetaData gwzMetaData, String CartridgeFileName, String CartridgeId, Int64 PlayerId, String PlayerName, DeviceType deviceType, String CompletionCode) at cartridge_download.btnDownload_Click(Object sender, EventArgs e)

I do not want to delete a listing. Just an older cartridge version. I have tried in the past to download a cartridge (to play) and have had up to three selections of cartridges to download. I was confused as to why I would have three versions to select from. I do see the "Upload GWZ File". And a spot to put a revision note. I'll try that when the time comes.

I heard that once a cartridge has been uploaded, it can't be deleted? This doesn't sound right. How would the user get the latest version of a cartridge?

I have just seen something new on the map displaying of a pocket query. From the "Running Pocket Query:", I have this; Then when I click on the "Map the Location", I get this; Only two caches are shown. The first one in the list is under the left hand panel. What happened to the other four.

You certainly dig deeper than I do with that browser console bug you noted. And I guess my ad blocking software works really good on GC.com as I can't remember seeing an ad in a long time.

I was just playing around with the cookies fix 2Abendsegler and GZseeker mentioned some more. I used the "Customize" version. Starting with only the "Necessary" option, the problem still existed. I then starting adding them one at a time "Preferences", then "Statistics" each addition did not fix the problem. I really thought they would. Then I added the "Advertising" option and it worked. That seems so wrong that an Adverting cookie seems to be at the root of this problem. Especially since, I thought that premium members don't get ads.

Thanks to 2Abendsegler and GZseeker that worked, kind of. I tried it and a popup appeared asking what level of cookies I wanted. I clicked "Use necessary cookies only " and it did not help. Then I clicked "Allow all" and it did fix the problem. I still consider this a bug/problem as a user should be able to select "Use necessary cookies only " if that's what they want.

I just started to have this problem in the past week. Either I get a map showing several states with every cache shown. Or I get a zoomed in look of a few miles around my home location showing every cache. One time just now I clicked the "Preview in Geocaching Maps" icon from my https://www.geocaching.com/pocket/ and it did display correctly that one time. I disabled Greasemonkey and Tampermonkey which did not resolve this issue. Windows 7 Firefox 110.0 (64-bit) Was running Project-GC but disabled the script without a difference.

Works for me now on Firefox.

It's called "on Error" of the Input. I just tried it and it displays the message that the answer is wrong and then jumps back into the question. Thanks so much.

I'm asking some questions by using the "Input" feature. It all goes great until the user clicks OK when nothing has been entered. It drops back to the Location/You See/Inventory screen. They can then back out of the zone and then back in to get another chance to answer. I've attached am image of my code. And a second image of something I tried to catch a blank answer.

I figured that Adventure Labs were logged immediately. The ALs I did that day were all found before I changed the drafts into actual logs. So I would think that there's no way one would end up as the milestone. Unless the drafts are actually time stamped for the order of being found and not when you make them an actual log. Set a different cache for this milestone won't work as my last one shown is for 10,000. I think the next one is 20,000. Thanks

Thanks Bl4ckH4wkGER. I found that section and enabled it. I may not ever be able to set the 17,000 milestone cache as by list ends at 10,000. I think GC.com's next milestone is 20,000.

I noticed this the other day. When I tried to look at my "Milestones" on my "Statistics" page, get the following message; "Cyclops is not allowing milestones to be displayed on his/her public profile." Right above that message I see a line that says "Everyone can see your Statistics. View settings ". When I click that link, it takes me to my "User Privacy" page. I can not find a setting for my Milestones. Plus every option to allow anything to be display is set to public. How can I enable my Milestones to be displayed. Thanks

I noticed a problem when I logged my cache finds the other day. I was at 16,999 finds and I logged a cache as my 17,000th. How I cached/logged that day is that I started out find caches saving a draft for each find or DNF. Then I found two Adventure Labs and a couple more caches. Later that day I started to change those drafts into actual logs. After I finished, I notice that I had 16,999 finds and that I forgot to save a draft for one cache. I logged that cache as my 17,000th. When I checked the "Milestones" (on PGC as GC.com say my milestones are set to not be displayed, which is another issue), it says the 5th stage of an Adventure Lab was my 17,000th. I'm confused.

This is my issue now for at least a month. Sure would be nice to see a post from the powers to be.

I did search these forums and did find threads about codes being to long. The codes that I have are all 15 characters long. Character count is not the issue. Thanks

When I try to enter the unlock code for a cartridge I just finished, I get this error message, "The unlock code you entered was incorrect." when I paste it in. I don't understand what I'm doing wrong. Any help will be appreciated.