Jump to content

stvanme

Members
  • Posts

    175
  • Joined

  • Last visited

Posts posted by stvanme

  1. One of the local cachers got to talk to the Garmin engineers the other day and it was his impression that the Colorado and future high sensitivity receivers do not benefit from averaging and there for will not have it.

     

    But this is second hand information and may or may not be true.

     

    Show this statement to any surveyor that is familiar with GPS and see what he/she says.

     

    I will not even consider buying a GPSr that doesn't have position averaging.

     

    Not even a fair comparison. A surveyor needs an instrument that is accurate to millimeters.

     

    At some point the percent increase becomes a virtual non issue. I don't know what that point is but on a unit with with a stated accuracy of about 9 feet and a resolution of 6 feet, a receiver that is more sensitive than the previous generation receivers shouldn't have a hard time reaching that point.

     

    It isn't about accuracy its about precision. Its about using proper methods so you have confidence in the position your GPSr gives you. You don't get that with just one reading, especially in the woods where GPS is at its greatest disadvantage and the majority of geocaches are placed. The stated accuracy of a unit is worthless if all your getting is noisy signal and multi-path that the "sensitive" receiver is using to calculate position.

  2. One of the local cachers got to talk to the Garmin engineers the other day and it was his impression that the Colorado and future high sensitivity receivers do not benefit from averaging and there for will not have it.

     

    But this is second hand information and may or may not be true.

     

    Show this statement to any surveyor that is familiar with GPS and see what he/she says.

     

    I will not even consider buying a GPSr that doesn't have position averaging.

  3.  

    For an on-line resection program, see: http://www.civl.port.ac.uk/structures/java...ion/default.htm .

     

    If one has more angles to more intersection station, these could provide a check.

     

    GeorgeL

    NGS

     

    It would be nice if this applet actually worked. The resulting network sketch and X coordinate are correct but the Y coordinate isn't even close. I've done the calculations in a stand-alone program so the input data I am using is correct. First email contact on page is non-deliverable, will see if I get a response from second.

    Too bad, I had an idea for the geocache using this applet.

  4. Does it come with the marble? :unsure:

     

    Looks cool.

     

    I'm not sure what to use as a marble. I can't find one small enough.

     

    You can buy ceramic ball-bearings. I've seen them in white. Don't know how much they cost or what sizes they come in. They are used on top end bicycles quite a lot.

  5. There are getting to be so many survey monument coins done that I would think you would need to do something to get this to stand out and making it a 3" coin would help in doing that. It would also depend on the cost. It seems $10 is about the magic threshold for people. So if you can't do 3" for under that I would reconsider.

    Maybe try and get people interested who normally would not buy a geocoin like having a companion pathtag, these are quite popular these days and cheap to make.

    Well, the "Initial Point" benchmark geocoins are at least 3"... so maybe we should make these 5" :ph34r:

     

    You wouldn't make it a 3" coin just for the sake of making a bigger coin, you'd make it to better replicate the actual monument. I have a replica of the Tri-Station on Mt. McKinley that I bought from one of those mountaineering places for around $35 at the office. I sometimes use it for a paper weight to hold down rolled up maps and often get compliments on it. Its a beautiful piece. A larger coin would also allow greater detail for the 3D image mentioned by the OP.

    A lot of geocoin collectors would not pay $35 for any geocoin but I bet quite a few BM Hunters would.

    I know I would. Could you sell enough of them to make it worth while, I have no idea. I think the Initial Point geocoin sold quite well. I would think most people in the BM Coin Club would buy one.

  6. There are getting to be so many survey monument coins done that I would think you would need to do something to get this to stand out and making it a 3" coin would help in doing that. It would also depend on the cost. It seems $10 is about the magic threshold for people. So if you can't do 3" for under that I would reconsider.

    Maybe try and get people interested who normally would not buy a geocoin like having a companion pathtag, these are quite popular these days and cheap to make.

  7. Compass Rose 2008.

    I sure hope they use the reservation system. I can't handle going through what has happened the last two years again.

    I am new here so what should I expect. I have heard of the compass rose and they must be rare so how exciting does it get trying to get one?

     

    They aren't all that rare, just popular.

  8. They're heeeeerrrreeeeee:

    Kuntry Kashin Ant Gold

    Kuntry Kashin Ant Silver

     

    The one listed as Ant Bronze? is the Ant Silver.

    The picture of the Ant Gold looks more like the Ant Copper that will be trade only by me.

    The Ant Gold looks more like, well, Antique Gold (it is Gorgeous!!)

    get 'em while they're hot... they seem to be going pretty fast.

     

    Earlier in the thread you mentioned a possible companion pin, I don't see any mention here or at the sale site of it. Can you tell me if there is in fact a companion pin?

  9. Hi

     

    I've just receive my first tag. Thank you Jennifer/UOtrackers, that was nice :anibad: .

     

    Now i had to find more :ph34r:

     

    PL

     

    Hello PL,

     

    Can you put some photos from your new Pathtags.

    Thanks

     

    NFreitas

     

    Claro Nuno

     

    adde210c-807a-43f8-8899-7ade964c1ee2.jpg

     

    PL

     

    For those that may not know: Pathtag on left/ Geotag on right of pic.

  10. I started a web site last year where I tried to index all the Geopins I could find. Here is the link:

    GeoPins Site

    It gets difficult to locate them all as many Geocoin sellers don't mention the availability of a companion geopin when they announce their coins for sale. (I'll generally buy a coin if a pin comes with it)

    I have most of the pins that are indexed (I keep them in a shoe box). I also have a trader page with my extras listed.

    There are about a dozen that I haven't put up on the site yet.

  11. I'm a little disappointed the pins weren't made available before the GeocoinFest Multi events as I'm sure many would have ordered them.

     

    I saw them posted on the site about a week before the events. I didn't buy any then because I had also hoped they'd be available during the events. I agree they would have been popular.

  12. I like you pathtag and would also be interested in a trade.

     

    I'm not an expert but I think there is too much detail in the boot prints for it to come out in a quarter size pathtag. If you use the geocaching logo it might also have to be larger. Just a thought. They may make some changes in the blueprint if you submit it as is.

×
×
  • Create New...