Guest n1niq Posted July 6, 2001 Share Posted July 6, 2001 I have the Garmin power/data cable for my GPS II that I was hoping to solder together this weekend. This is the cable with the Garmin plug at one end and four loose wires at the other. I know which two wires are for data in and out but I don't know which posts to connect them to on the DB9 so I can use EasyGPS. Does anyone have the literature for this? Quote Link to comment
Guest Kerry Posted July 6, 2001 Share Posted July 6, 2001 RS232 DB-9 Female Pin 2 - Garmin Brown, DB-9 Pin3 - Garmin White, DB-9 Pin5 - Black (Ground). Cheers, Kerry. Quote Link to comment
Guest Silver Posted July 7, 2001 Share Posted July 7, 2001 n1niq, Take a look at the graphic half-way down this page. It will help. http://pfranc.com/projects/g45contr/assemb.htm Silver Quote Link to comment
Guest n1niq Posted July 7, 2001 Share Posted July 7, 2001 Thanks guys. That's what I needed! Chris Quote Link to comment
Guest n1niq Posted July 7, 2001 Share Posted July 7, 2001 It works. I soldered the cable up, tested the circuits, et voila! EasyGPS is great! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.