+two much fun Posted December 2, 2012 Share Posted December 2, 2012 How can I keep my 62st functioning when it is plugged into my computer with a usb? It goes into a sleep mode with a picture of the usb on the screen Sometimes it wakes up on it's own, maybe when the battery is charged? Quote Link to comment
alandb Posted December 2, 2012 Share Posted December 2, 2012 I am not sure about about the 62st, but on my Oregon there is a "spanner mode" that allows you to select between USB mass storage and normal operation when plugged in. It is in the Setup > System > Interface menu. Quote Link to comment
+two much fun Posted December 2, 2012 Author Share Posted December 2, 2012 I am not sure about about the 62st, but on my Oregon there is a "spanner mode" that allows you to select between USB mass storage and normal operation when plugged in. It is in the Setup > System > Interface menu. Quote Link to comment
+two much fun Posted December 2, 2012 Author Share Posted December 2, 2012 Thank you that worked Quote Link to comment
+two much fun Posted December 2, 2012 Author Share Posted December 2, 2012 The usb pic means it's connected and can be 'seen' by your PC. If you simply want to use it while plugged in do a 'safe eject'. It should then be available to use. Note it's not charging when connected Quote Link to comment
+two much fun Posted December 2, 2012 Author Share Posted December 2, 2012 I changed the interface to spanner mode and that worked. What do you mean by "safe eject" and how will it charge off the computer when using rechargable batteries and setup for that in setup? Quote Link to comment
+two much fun Posted December 2, 2012 Author Share Posted December 2, 2012 Use the Windows 'safe eject' rather than simply pull out the USB. As for charging off the computer, it won't ... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.