+Red Iguana Posted September 5, 2007 Share Posted September 5, 2007 Some of the function buttons on my unit are either not working at all, or are intermittent. Has anyone experienced similar problems, and if so, did you find a fix? Specifically, the escape (x) button does not work at all, and the in and out buttons intermittent, as is the down toggle feature. I have sent Magellan two e-mails, but no response. Thanks Quote Link to comment
+Trail Buzzards Posted September 6, 2007 Share Posted September 6, 2007 If under warranty you may want to send it back for repair, otherwise, carefully open the case and clean the contacts where the buttons press against the circuit board. I used alcohol. An erasure will probably work as well. Quote Link to comment
+Bad Duck Posted September 9, 2007 Share Posted September 9, 2007 I used the same fix as trailbuzzard on mine. Cleared it right up. Quote Link to comment
+CacheCrashers Posted September 13, 2007 Share Posted September 13, 2007 I used the same fix as trailbuzzard on mine. Cleared it right up. Hmmm...went out to replace a cache today and I had the same problem..the IN button does not work...will try the alcohol and a Q-tip method....these are easy enough to tear apart, eh? Later Phil Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.