+Softheads Posted April 12, 2005 Share Posted April 12, 2005 Does anyone else have problems transferring large TRACK files from the 60cs into Mapsource? I get a "Error communicating with your device...etc" when the tracks are large. The Track page on the GPS now shows 66% full. It won't transfer to the Mapsource software. It starts the transfer and gets to about 15-44% done and fails. Quote Link to comment
+Team KwikSilver Posted April 13, 2005 Share Posted April 13, 2005 I get a "Error communicating with your device...etc" when the tracks are large. The Track page on the GPS now shows 66% full. It won't transfer to the Mapsource software. It starts the transfer and gets to about 15-44% done and fails. Have you tried to transfer the track using some other software package (such as ExpertGPS) to try and determine if the problem is the hardware or the software? Quote Link to comment
+Softheads Posted April 13, 2005 Author Share Posted April 13, 2005 I've also tried OziExplorer v3.95.4g and get an error at reading record 1000 of 7203. Also failed on ExpertGPS. -------- Problem Solved ----- FYI ----- Tried the USB cable directly into the computer's USB 2.0 port on the front, and it worked. The cable previously was in a Newport USB hub that may only be USB 1.1. The connection had not been a problem until this big track (see attached file). It looks to be a USB hub problem. I will replace the Newport hub with a new 2.0 hub, try it again, and let you know how that worked/if the hub is the problem. Quote Link to comment
+Softheads Posted July 24, 2005 Author Share Posted July 24, 2005 New firmware for the 60cs has solved the problem. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.