Agent N. Posted October 2, 2004 Share Posted October 2, 2004 can someone tell me how to make a good cache that looks just like a pine cone? I tried cuting them in half but they fell apart I tried pulling all the little pine things and glueing them to a film can but it looks like this Quote Link to comment
+welch Posted October 3, 2004 Share Posted October 3, 2004 Haven't tried it, this will be interesting to watch. But I was thinking... would it maybe work better to use a cone that isn't so old (and opened up /seperated, whatever you call it)? Quote Link to comment
+YuccaPatrol Posted October 3, 2004 Share Posted October 3, 2004 It doesn't have to look exactly like a pine cone for it to disappear on the forest floor. In fact, I think a mis-shaped pinecone cache like you made is perfect. Nobody but a cacher would ever find it and it will still be very hard to find while being just different enough that a cacher's eye will pick up on it. Quote Link to comment
+fly46 Posted October 3, 2004 Share Posted October 3, 2004 I would think you wouldn't want it too perfect, because if people can't find it, they'll start to get mad at you anyway. lol. I think yours will blend in out in the wild. Quote Link to comment
Agent N. Posted October 3, 2004 Author Share Posted October 3, 2004 not too perfect but this one is opening backwords lol (pine cones always open from the top to the bottom) I hope muggles wont see that lol Quote Link to comment
+CompuCash Posted October 3, 2004 Share Posted October 3, 2004 I have a couple that I was going to drill out from the base - maybe I'll have to glue it back together - don't know yet - will post photos here when I do one. Quote Link to comment
+Dan-oh Posted October 3, 2004 Share Posted October 3, 2004 Try the Cool Cache Container thread for any specifics. I think there's an image or two posted there. Quote Link to comment
+GEO*Trailblazer 1 Posted October 3, 2004 Share Posted October 3, 2004 One Hint, Make sure it is a green one. A wood bit????? Quote Link to comment
+rascel Posted October 3, 2004 Share Posted October 3, 2004 (edited) I just set one out, Emerald Nuts, in the Bay area. I have tried a few, and learned by many mistakes. Currently I get a green pine cone, cut off the top, and then carefully drill out with a 1 1/4 or 1 1/2 in bit. I do stop often to check how further I can drill, and have had a few break up on me. Try different cones as well, One cone that I found was very big, and when I drilled the hole, it was more mushy and stringy. That is OK, I just take a side snippers, and cut it out by hand, and pull out all the pine nuts I find. After a bit of drying, I then restuff the insides with wood putty, and redrill and sand it out. I also have put a magnet in the top and bottom of the cone to hold the top in place. I use 2 chains, 1 to connect the top to the bottom, and 1 to hold the cone from the bottom. I was guessing that suspending from the top would not hold in a strong wind. A bit of paint, and cover with dull overcoat, and add a 35mm film can, or an empty pill bottle with a geocache note inside. Rascel Edited October 3, 2004 by rascel Quote Link to comment
Agent N. Posted October 3, 2004 Author Share Posted October 3, 2004 get a green pine cone, cut off the top, what do you use to cut it? Quote Link to comment
+Anonymous' Posted October 4, 2004 Share Posted October 4, 2004 I saw one cache that was three pinecones glued together around a film canister and hung from a tree. Quote Link to comment
+nicolo Posted October 4, 2004 Share Posted October 4, 2004 I was out caching today and found several cool items to make a micro out of. Looks like some branches had fallen off and the core had rotted out, leaving the bark intact. Some of the core was still in and I'd like to keep it in. Can anyone suggest some kind of clear-drying fluid that I could pour in the rotting core so that it's stay inside? Thanks. Quote Link to comment
+Dad and the Dynamic Duo Posted October 4, 2004 Share Posted October 4, 2004 can someone tell me how to make a good cache that looks just like a pine cone? I tried cuting them in half but they fell apart I tried pulling all the little pine things and glueing them to a film can but it looks like this I did one. The container went missing recently but here's what I did. I started with large open pine cones that I found when I was in Monterey, CA. I thinned some wood glue from the hardware store and coated the whole thing in glue. I let it dry and then recoated it again. Then I drilled it out with progressively larger bits until I could fit a 35mm film container inside. Using the same mixture from above, I did two coats in the hole I drilled and then inserted the film container. The glue held all the parts together. Finally I did a very light caot of brown ultra flat paint to take the shine off the glue and add a little water proofing. George Quote Link to comment
Agent N. Posted October 4, 2004 Author Share Posted October 4, 2004 I can't find any that big to be able to drill a hole in it so a film can will fit Quote Link to comment
+NotNutts Posted October 5, 2004 Share Posted October 5, 2004 Here's one I made. I got one of those industrial-sized Carolina Cones, clipped out some of the pins on one side, and glued in a film container. I just set it cache side down. The only problem is people often find it only by stepping on it. I've got some DNFs from pretty experienced cachers. Quote Link to comment
+lensgrabber Posted October 8, 2004 Share Posted October 8, 2004 oh man.. these pine cone caches are just cruel! (but.... I wanna do one really bad!) Quote Link to comment
+LaPaglia Posted October 8, 2004 Share Posted October 8, 2004 It never fails to impress me how artistic some people can be. I cant draw a straight line with out a T-square. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.