+Garmin Guy Posted August 31, 2004 Share Posted August 31, 2004 (edited) An easier way to find out the version number and many other things is to do an internal BIT test... PRESS & HOLD ENTER KEY and at the same time POWER UP.....KEEP BOTH BUTTONS PRESSED until test screen appears Here you can view much technical data such as Voltage supply, Temperature of unit, as well as test buttons, colours, greyscale etc Anyone got anymore secret button presses? Hope this helped? Edited August 31, 2004 by Garmin Guy Quote Link to comment
+YuccaPatrol Posted August 31, 2004 Share Posted August 31, 2004 If you press up up down down left right left right, you will get powers of invisibility. It's too bad that this is the only way to get a temperature measurement. Sure would be a convenient thing to know, especially since the function exists but is not normally available to the user. . . Quote Link to comment
coolclay Posted August 31, 2004 Share Posted August 31, 2004 But as soon as the unit warms up and the processor gets going the temp. will not be accurate anymore. The temp. is internal only but it still would be nice if they made it an option like when you turn it on. There are no other "secret codes" that I am aware of in Garmins. Except some older models have an emergency memory delete sequence. Mostly used when the feds are on your heels and you need to delete your secret hide out waypoints and such Magellans have lots more technical information in there "secret codes" Quote Link to comment
+Garmin Guy Posted August 31, 2004 Author Share Posted August 31, 2004 (edited) I found another one! HOW TO MASTER RESET a GPSMAP 60C, 60CS Hold enter and page while powering up to master reset the unit.[/size] Found it here! It also has old GPS codes.. Edited August 31, 2004 by Garmin Guy Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.