+M3ZPY Posted August 12, 2004 Share Posted August 12, 2004 Hi All, I have recently bought my 60cs and had to get a seriel cable for the Anquet mapping software but unfortunatly at present Anquet dont support the 60cs so my question to you all is - is there a way around it to download my routes to the gps or do I have to set the gps to something other than garmin and vise versa? please please help Quote Link to comment
Neo_Geo Posted August 12, 2004 Share Posted August 12, 2004 (edited) THEIR WEB SITE says: "All Garmin and Magellan GPS units are supported". If the 60 series is indeed newer than their latest Web page revision, then the fact that you're getting a serial cable will allow you to fool the software into thinking your 60 is a Garmin Rino (or other supported Garmin GPSr) Edited August 12, 2004 by Neo_Geo Quote Link to comment
+M3ZPY Posted August 13, 2004 Author Share Posted August 13, 2004 Thansk for that - I will give it a go tonight Quote Link to comment
Steve_D Posted August 13, 2004 Share Posted August 13, 2004 Hi All, I have recently bought my 60cs and had to get a seriel cable for the Anquet mapping software but unfortunatly at present Anquet dont support the 60cs so my question to you all is - is there a way around it to download my routes to the gps or do I have to set the gps to something other than garmin and vise versa? please please help I used a Serial cable and set the anquet software to "Unit not listed" then set the values by hand - its pretty simple. The routes etc seemed to download OK but I haven't tried them in the wild. As a test I then moved the routes off the GPS onto Mapsource and they matched the roads etc fine. Steve D Quote Link to comment
+M3ZPY Posted August 13, 2004 Author Share Posted August 13, 2004 nope its no good I can't get knowwhere on this one I am running version 1.1.3 and there aint no rhino nor does it let me put it in manually - the darn thing keeps auto detecting Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.