Andre1956 Posted December 26, 2003 Share Posted December 26, 2003 I have a GPS V, I can download waypoints from the computer, but what if I want to enter coordinates in the field, how do I do that, I can't figure it out. Thanks. Quote Link to comment
+fivegallon Posted December 26, 2003 Share Posted December 26, 2003 RTFM,and if you don't have one,try here http://www.garmin.com/products/gps5/manual.html Quote Link to comment
+Hemlock Posted December 27, 2003 Share Posted December 27, 2003 Short answer. Press the MARK button to mark your current location, then edit the coords to that of your target. Long answer. Hold down the ENTER/MARK key to mark your current location. When the window pops up, press the rocker button a couple of times until the coordinates field is highlighted. Press ENTER. Change the coords to that of your target, then move to the OK field and press ENTER. If desired, move the highlight to the name area, and change the name similar to how you changed the coords. Move the highlight to the GOTO button on the screen and press the ENTER key. Great unit you've got there. A few minutes with the manual won't hurt Quote Link to comment
Andre1956 Posted December 27, 2003 Author Share Posted December 27, 2003 Hemlock, Thank you very much for all your help, I did look at the manual, but could not find anything, but I will look again. I am very familiar with GPS's as I use them everyday in my work, but I don't have to enter coordinates, just addresses. I think the GPS V is the best handheld out there at this time. Again, thanks for your help. Andre Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.