+gjhimages Posted December 7, 2022 Share Posted December 7, 2022 After finishing editing a Cartridge I get an error code. Therefore I am unable to edit the Short Description, Long Description, Author Name, Cartridge Type nor any of the edit fields. Luckily the Long Description was uploaded while uploading the GWZ. I have tried it in Safari and Chrome with the same results. It appears that there is a broken link in the programing. I receive this Error: Quote Link to comment
+capoaira Posted December 7, 2022 Share Posted December 7, 2022 You may be have linebreaks in your description. These are converted to the html linebreak <br>. But htlm are not allowed. You have to remove these tags before saving. 1 2 Quote Link to comment
+gjhimages Posted December 7, 2022 Author Share Posted December 7, 2022 (edited) capoaira, you were right. I did have <br> in the description. Thanks for the great suggestion, which worked. Edited December 7, 2022 by gjhimages Quote Link to comment
+TeamGMMP Posted January 2, 2023 Share Posted January 2, 2023 Yesterday I was able to successfully upload the cartridge, but I am not able to edit its details, i.e. country, state, etc. I am also not able to make it visible and searchable. I get this error message as shown at the top of this page upon clicking "Edit Details". What is worse, I am not able to edit ANY of my previously uploaded cartridges, and I had no problems editing them before. Even with line breaks in the description, I was able to clean them up in "Edit Details", so this was not an issue. Going back to the most recent cartridge I uploaded yesterday - cleaning any line breaks in the description (I use urwigo), building the cartridge and uploading it again, didn't help. Any help is welcome. Thank you. Quote Link to comment
+Freddo Posted January 2, 2023 Share Posted January 2, 2023 I have not been able to upload my cartridge's for several days. The cartridge is a cookie cutter that has be uploaded previously without any problems. Following message is received. Upload a Cartridge GWZ File Error Occurred An unknown error occurred Quote Link to comment
+TeamGMMP Posted January 2, 2023 Share Posted January 2, 2023 @Freddo, I have the same message with my most recent cartridge upload, but to my surprise, it has been uploaded, nonetheless. I still cannot edit its details, I cannot make it public, etc. The issue still has not been fixed by Wherigo.com. Quote Link to comment
+Freddo Posted January 3, 2023 Share Posted January 3, 2023 Thanks for the follow up. I have now found that regardless of the error message above the cartridge has upload. 13 times!! Now I find that the edit page is not working and the cartridge can't be enabled. Quote Link to comment
+DeborahVanDerLinden Posted January 3, 2023 Share Posted January 3, 2023 I have the same problem. I cannot edit the details, and therefor I am unable to take a page offline. Quote Link to comment
+DeborahVanDerLinden Posted January 3, 2023 Share Posted January 3, 2023 There is HTML in the description, but I cannot remove it, because I cannot edit the details. I send a message to HQ, but the response was, that there is no technical support and I should try the forum. How can I edit the details when I am unable to edit the details???? Hmmm, I don't know. Anyone who does? Quote Link to comment
+Forest-Ghost Posted January 3, 2023 Share Posted January 3, 2023 I am receiving the same error as well and can no longer edit any of my Wherigo cartridges. I have tried reporting the issue HQ -- hopefully they will fix it. Quote Link to comment
+Freddo Posted January 3, 2023 Share Posted January 3, 2023 The problem is deeper than code in the cartridge. I have checked with a previously OK upload and it now gives the same error. I have 35 previous uploads of this same cartridge. All the same apart from the coordinates used in the zones. There is no html in these cartridges. I received the same message from HQ. No Wherigo support available. Does anyone have a link for the Wherigo tech forum? Thanks. Quote Link to comment
+TeamGMMP Posted January 3, 2023 Share Posted January 3, 2023 I hate to disappoint you, @Freddo, but THIS here is the Wherigo tech forum, here. Groundspeak has left Wherigo.com off as-is in 2008, so we are on our own... :(((. All - the good thing is, once you provide a link to your downloaded cartridge on your geocache page, it is downloadable form there and playable, at least on my Android phone. Quote Link to comment
+DeborahVanDerLinden Posted January 3, 2023 Share Posted January 3, 2023 That's bad, because I have to archive one of my geocaches. I want to deactivate the cartridge, but that doesn't work any more. Is there no support at all for the website? Quote Link to comment
+TeamGMMP Posted January 3, 2023 Share Posted January 3, 2023 3 hours ago, DeborahVanDerLinden said: That's bad, because I have to archive one of my geocaches. I want to deactivate the cartridge, but that doesn't work any more. Is there no support at all for the website? Apparently, there isn't. If you look at other Wherigo topics on the forum, you'll see it. https://forums.geocaching.com/GC/index.php?/forum/62-Wherigo/ There will be no improvements, whatsoever, I don't know, if they are planning to fix, what it has broken now. Quote Link to comment
Frau Potter Posted January 4, 2023 Share Posted January 4, 2023 Thank you for reporting this problem with editing Wherigo cartridges. We have notified the engineering team. 1 Quote Link to comment
+Freddo Posted January 4, 2023 Share Posted January 4, 2023 I have found that regardless of error messages cartridges do upload, and if you provide a link to the GUID then the uploaded cartridges are in fact visible and downloadable as .gwc to players. https://www.Wherigo.com/cartridge/details.aspx?CGUID=4690cdb0-a7e0-4e4f-a2db-b5b739a94229 https://www.Wherigo.com/cartridge/details.aspx?CGUID=b2224375-59a3-4a97-8578-ddedfbc1a29b I think that lets me get my two new whereigos in for review. Cindy. Please note the response from contact at GC was that there was no technical support available for Wherigo. Your assistance is greatly appreciated. Quote Link to comment
+TeamGMMP Posted January 4, 2023 Share Posted January 4, 2023 11 hours ago, Frau Potter said: Thank you for reporting this problem with editing Wherigo cartridges. We have notified the engineering team. Awesome! Thank you very much, Cindy, for taking time to look into it. I appreciate it a lot and I am pretty sure people on the forum will as well. Best Regards, TeamGMMP Quote Link to comment
+DeborahVanDerLinden Posted January 5, 2023 Share Posted January 5, 2023 On 1/4/2023 at 1:56 AM, Frau Potter said: Thank you for reporting this problem with editing Wherigo cartridges. We have notified the engineering team. Thank you very much! That is great news! Quote Link to comment
+Freddo Posted January 6, 2023 Share Posted January 6, 2023 Looks like the edit issues have been fixed. W00t!! Quote Link to comment
+TeamGMMP Posted January 6, 2023 Share Posted January 6, 2023 Sometimes it errors out, when I hit "save details" button, so what I do is one entry at a time, i.e.: - Author Name -> Save, - Company Name -> Save, - Description - remove these pesky <BR>'s -> Save. ... - Country -> Save, - State/Province -> Save. ... etc. If there is an error, while hitting "Save" especially after hitting "Save" for the first time, I return to it without problems and start over or continue as shown above. Thank you, TeamGMMP Quote Link to comment
+TeamGMMP Posted January 6, 2023 Share Posted January 6, 2023 Just now, TeamGMMP said: Sometimes it errors out, when I hit "save details" button, so what I do is one entry at a time, i.e.: - Author Name -> Save, - Company Name -> Save, - Description - remove these pesky <BR>'s -> Save. ... - Country -> Save, - State/Province -> Save. ... etc. If there is an error, while hitting "Save" especially after hitting "Save" for the first time, I return to it without problems and start over or continue as shown above. Thank you, TeamGMMP But I can live with it, just to be clear :))). Quote Link to comment
+DeborahVanDerLinden Posted January 7, 2023 Share Posted January 7, 2023 I am so happy that I can edit my cartridge details again, it is much appreciated! Quote Link to comment
+watersphere Posted April 8, 2023 Share Posted April 8, 2023 On 1/2/2023 at 11:16 PM, Freddo said: Upload a Cartridge GWZ File Error Occurred An unknown error occurred I am also getting this error message today while trying to upload a new version of my cartridge. Is there maybe a size limit for the cartridge? My cartidge is about ~25MB... Mainly because of many images and sounds. It is a bigger story that I have been working on for 3 years. Unfortunately, I had not uploaded any versions in between. Quote Link to comment
+capoaira Posted April 9, 2023 Share Posted April 9, 2023 Yes, I think the Limit is 20 MB Quote Link to comment
+watersphere Posted April 9, 2023 Share Posted April 9, 2023 6 hours ago, capoaira said: Yes, I think the Limit is 20 MB Indeed... I compressed the images and sounds a little bit more and tidied them up. Now, with 17,5MB it worked well. thanks a lot. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.